cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

System state failures in pure disk

Hello All, it was windows 2008 r1 Client backup is failing with system state(completing with 64%), and getting below errors. Error: 2: resource child process: snapshot required but there is nothing to snap: no such object Error: 2: name process: u...

Anil_B by Level 4
  • 2394 Views
  • 4 replies
  • 0 kudos

Resolved! Pure disk reinstallation

Hello Experts, while reinstaling the pure disk client s/w on existing host(agent id:23), what happens if we reinstall the pure disk s/w with different agent ID(agent id 42). How the PD SPA will consider?

Anil_B by Level 4
  • 3061 Views
  • 2 replies
  • 0 kudos

Resolved! About Pure Disk

Hi All, Kindly let me know the following few questions about pure disk. 1)what is pure disk? 2)About pure disk architecture? 3)About pure disk deduplication? 4)About pure disk web user interface? 5)Can i know the role of vssadminlist writers re...

Anil_B by Level 4
  • 3061 Views
  • 2 replies
  • 3 kudos

Resolved! Images Not expiring off Disk Netbackup 7.6

Hello I have noticed that one of our PureDiskVolume deduplication disks has filled up (above 95% water mark). I have expired some old images that are no longer required, I have done this but the space has not been cleaned up. I understand there is a...

How to determine if CR rebasing completed

Hi, I am trying to find a way to find out if the post 6.6.3a PureDisk upgrade Content Router rebasing has completed. It is quite easy to check with the crcontrol if the rebasing option is enabled or disabled at all but I would like to know if the reb...

f25 by Level 4
  • 1249 Views
  • 4 replies
  • 1 kudos

Mass delete error messages

When sorting though error messages in Puredisk, we have 33,611 critical error messages. the error itself has been resolved, but I would like to remove these messages. Does anyone know a way to mass delete these? Right now I can only remove them 20 or...

Check Size of a Image

Is there any way to check the size of an image in an MSDP? I need to replicate a subset of the images on one MSDP to another and am trying to put a timeline together. Also if there is a way to figure out the size of that image after it is rehydrated ...

VCS probe issue with puredisk cluster

Perform the following action in a puredisk cluster: Freeze the clusterTake down puredisk for maintenance At this point, the cluster will set the state of puredisk to "offline" Bring puredisk back up At this point, the cluster will NOT set the state o...

Symen by Level 2
Partner Accredited
  • 247 Views
  • 0 replies
  • 0 kudos

PureDisk 6.6.3 with 6 nodes / rerouting MBE for a PDDO agent, it's possible ?

Hi,  I have a Storage Pool PureDisk 6.6.3a with 6 nodes :    - Node 1 / SPA, MBS, MBE and CR    - Node 2 / MBE and CR    - Node 3 / MBE and CR    - Node 4 / MBE and CR    - Node 5 / MBE and CR    - Node 6 / MBE and CR     This Storage Pool work ...

Stephane_COLIN by Level 4
Partner Accredited Certified
  • 516 Views
  • 1 replies
  • 0 kudos

SP Consistency Check Error

I have a 5020 appliance running 1.3.0.2 (planning to upgrate to 1.4.1.1 at some point), but there are 2 SP consistency jobs that keep constantly failing (after running for a while), week after week, on 2 specific datasets (across 2 different servers)...

Speeder by Level 3
  • 349 Views
  • 2 replies
  • 0 kudos

Agent Replication Failed

Hi,   We have set replication between 2 PureDisk SPA (6.6.1.2) for several agent and all is working fine except for one agent. We have the same error each time for him and backups are fine :  *** Start: Replication Prepare *** The is Classic Repli...

Resolved! Pure Disk Pool

Good Morning Gurus of the NBU world.  I have a question that I think I know the answer too But here goes anyway.   I had a linux master server and a windows media server.  The windows media server was connect to a PD device.  Well, long story short, ...

how to calculate duplication time

I have a Storage Lifecycle Policy that duplicates from tape to puredisk and i want to know if is possible to calucate the duration of duplications. Thanks

mauog by Level 3
  • 347 Views
  • 1 replies
  • 0 kudos

Key not found in INI file

Has anyone else been recieving these warning messages under PD 6.6.1? I have several content routers with this in them. I have compared several servers trying to work it out but cant see anything obvious. Source: MBE-CLI_Component Alert Severity Leve...

Puredisk 6.6.0.3 - Restart Job Question

I gracefully stopped a job because it was saturating a remote link.  If I select the job and click on "Restart job," is it going to pick up where it left off or simply restart at the beginning?  Could I have throttled back the job on the fly? Thanks...

rsamora by Level 5
Certified
  • 246 Views
  • 1 replies
  • 0 kudos

Puredisk 6.6.0.3 - Restart Job Question

I gracefully stopped a job because it was saturating a remote link.  If I select the job and click on "Restart job," is it going to pick up where it left off or simply restart at the beginning?  Could I have throttled back the job on the fly? Thanks...

rsamora by Level 5
Certified
  • 258 Views
  • 1 replies
  • 0 kudos

Verify that data is being transferred

I have a remote server being backed up over a slow WAN link and I know that the initial job is going to run forever.  Yesterday morning the job was at 8% complete and it never changed all day.  This morning it is at 14% complete so I know that there ...

rsamora by Level 5
Certified
  • 556 Views
  • 4 replies
  • 0 kudos