cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup PureDisk
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Client - Media - PureDisk Linux network traffic

Hello everyone.   We have a backup solution and I am trying to find a bottleneck. Configuration is as follows: Veritas SFHA clustered Master server running NBU 7.5.0.6 on RHEL6.1.  Number of Media servers. And 3 pairs of PureDisk 6.5.5 pools as...

Resolved! About Pure Disk

Hi All, Kindly let me know the following few questions about pure disk. 1)what is pure disk? 2)About pure disk architecture? 3)About pure disk deduplication? 4)About pure disk web user interface? 5)Can i know the role of vssadminlist writers re...

Anil_B by Level 4
  • 3061 Views
  • 2 replies
  • 3 kudos

SLP Duplication Behaviour

Master Server ( nbu01 ) Windows 2008 NetBackup Master 7.5.0.7 Media Server ( nbu02 ) Window 2008 NetBackup Media 7.5.0.7 MSDP with puredisk  Setup storage server load balancing for dedupe pool  nbu01 and nbu02 setup SLP backup to disk then d...

Netbackup Appliances 5230 with PureDisk: How many streams?

Hi all, We recently migrated to Netbackup Appliances running Netbackup 7.6.0.1 (Appliance version 2.6.0.1 ) We are running 2 appliances per site, each site is its own NBU domain (We use AIR to replicate). Each appliance is configured with a 70TB Pure...

NBU-Duplication issue

hi guys,   i'm facing a strange issue when duplication images from my AdvDisk... if i run backup with my Netbackup 7.5.0.5 to Advdisk its successful and duplicating simultaniously to puredisk the performance is  OK up to  (87000KB/SEC) if i run backu...

How to determine if CR rebasing completed

Hi, I am trying to find a way to find out if the post 6.6.3a PureDisk upgrade Content Router rebasing has completed. It is quite easy to check with the crcontrol if the rebasing option is enabled or disabled at all but I would like to know if the reb...

f25 by Level 4
  • 1249 Views
  • 4 replies
  • 1 kudos

Common issues in Puredisk concept

Hi All,   Hope your are doing well..   We are going to use puredisk in our environment with NBU 7.1, kindly let us know common issues on puredisk with solutions.   Regards, Nnkvnb    

nnkvnb by Level 2
  • 873 Views
  • 2 replies
  • 1 kudos

CLI Command For Dedup Rates

NBU Experts,   Do any of you know if there is a CLI command  that can tell the dedup rate for all the images created, and stored in a PureDisk pool? For examaple, if I run bpimagelist on the master server I get some good info, but not the dedup rate ...

Is there a way to speed up MSDP startup?

I am in the process of upgrading my NetBackup environment from v7.1.0.4 to v7.5.0.5.  Master server on Linux is done as are some of my Linux based media servers. I am now starting on my Windows 2008 based MSDP servers with one done so far.  However, ...

Mass delete error messages

When sorting though error messages in Puredisk, we have 33,611 critical error messages. the error itself has been resolved, but I would like to remove these messages. Does anyone know a way to mass delete these? Right now I can only remove them 20 or...

MSDP question re full at 96% vs. high water mark at 98%

  When does full disk processing take place?  At 96% or 98% ? And doesn't this all imply that a high water mark is probably best set to something like 90% (max)or probably (85%) so that clenup can occur before it gets full.  If so, then why is teh de...

sdw305 by Level 3
  • 1526 Views
  • 1 replies
  • 0 kudos

NetBackup PureDisk Pool - Segments folder

Hi all,  We have a PureDisk pool which fills up rather quickly. On inspection there is a Segments folder (\history\segments) on the PureDisk media server which has over 100GB of data.  I haven't been able to find much information on what the data is ...

old_mate by Level 4
Partner Accredited Certified
  • 495 Views
  • 2 replies
  • 1 kudos

NetBackup PureDisk Pool - Segments folder

Hi all,  We have a PureDisk pool which fills up rather quickly. On inspection there is a Segments folder (\history\segments) on the PureDisk media server which has over 100GB of data.  I haven't been able to find much information on what the data is ...

old_mate by Level 4
Partner Accredited Certified
  • 276 Views
  • 0 replies
  • 0 kudos

Puredisk 6.6 backup taking very long to complete daily backups.

Hi, need some advise from our Puredisk gurus. Some of our files servers at our remote sites are not completing their daily backups within 24 hour windows and exceeding it ... sometimes may take 3 or 4 days to complete all the backup jobs. Each server...

fyl by Level 2
  • 704 Views
  • 4 replies
  • 1 kudos

Resolved! Pure Disk Pool

Good Morning Gurus of the NBU world.  I have a question that I think I know the answer too But here goes anyway.   I had a linux master server and a windows media server.  The windows media server was connect to a PD device.  Well, long story short, ...