cancel
Showing results for 
Search instead for 
Did you mean: 
NetBackup
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Subscribe to NBU notifications

In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 2679 Views
  • 0 replies
  • 16 kudos

NDMP restore: Error bpbrm (pid=5768) could not open event Global\NetBackup BPBRM Media Ready Event 8284, The system cannot find the file specified.

Hello, Any help or hint to troubleshoot will be greatly appreciated. I have the error while NDMP NAS restore. I have the following setup: NDMP NAS configured on a AIX 7.1 master server Netbackup 7.6.1.2NDMP NAS is HNAS 3100(Hitachi)NDMP backup/res...

Resolved! Migration server Netbaсkup

Good day! We have deployed a master Netbackup 7.7.1 server on the AIX 6.1 platform - a physical server. We were tasked to move the role of the master server to a virtual machine under the windows 2012 R2. The question is - if possible in such a wa...

Kroxa by Level 3
  • 598 Views
  • 3 replies
  • 0 kudos

NBU 7.6.1 - HP StoreOnce OST Catalyst

Hi all, someone use this configuration with Option synthetic backup enabled ? I seem that synthetic backup does not work, and the performance does not encrease respect to the normal backup.   thank you for any experience, regards

stucci by Level 6
  • 572 Views
  • 5 replies
  • 0 kudos

bpps -x did not showing any output

Hi everyone, Hoping someone would help me here. I am setting up a SAN client on one AIX client, after putting SANCLIENT = 1 inside bp.conf, I stop the netbackup client services and start it again from /usr/openv/netbackup/bin/goodies/netbackup stop ...

tarmizi by Level 5
Partner Accredited Certified
  • 1338 Views
  • 12 replies
  • 1 kudos

Frequently drive is going down.

Hi all, Frequently drive is going down. No media stuck inside the drive and all the drives are up in SL console. when we checked from NBU end, same drive is down. and backups are not happening. there is no error with hardware level. Please help me t...

Resolved! restore failing with 85

When I do the restore using Host properties --> Master server --> General Server --> Media Host Override the restore is failing with error code 85, Media read error. The is the error which I am getting.   02/10/2016 22:28:44 - Error bptm (pid=5407...

Resolved! Restore error 85 while using other Media server

Hi,  I have an image backed up using Media server A and written to tape now I wanted that to be restored using another Media server B for that I have used Media Host Override option. But when the restore is running it is failing with error code 8...

DD Implementation

Hi All, Currently in our backup setup, we are going to implement DD, I have never configured DD boost or VTL. So i required your help to startup with activity. If possible, can anyone share the procedure of DD implementation(like POA). It will be ve...

Resolved! How to Backing up AIX volumen on a master server Windows

Hi,   I am trying to deploy a particular solution, i have a master server Windows Server 2012 R2.   I have some servers which have the storage presented from a SAN, these servers have other operating system, i mean Linux red hat, AIX, etc. ( Thes...

Resolved! Client side dedup

Dear Experts, i need your help to understand the following. I have created an oracle intelligent policy and it's running fine. I measured the elapsed time: it took me 58' to backup 500 GB of DB. I then decided to enable client side deduplication a...

kwakou by Level 4
  • 441 Views
  • 3 replies
  • 0 kudos

Resolved! Use of Accelerator

Hello ! Anyone know some way of using Netbackup accelerator with "user archive" types ? of course my "user archive" policies type are Standard. but accelerator seems working only with full backup or incremental schedules 

kwakou by Level 4
  • 545 Views
  • 15 replies
  • 0 kudos

Resolved! Netbackup 7.7.1 AIX Installation issue

Dear all, I tried to install Netbackup 7.7.1 in AIX 7.1 using the binary file "NetBackup_7.7.1_AIX64.gz as a media server I followed 7.7 installation guide to install. Of course, I checked all connection is fine after completed the installation Bu...

Resolved! License question

Hi,   planing to deploy IBM power system p595 with 3 lpars witng netbackup sap agent and 2 lpar  with enterprise  server  license Please clear my doubts on the following; according to the below statements from the licensing guide, do i need one sa...

SARA_8 by Level 4
  • 1116 Views
  • 8 replies
  • 0 kudos

Resolved! track_journal.v1.dat Are growing to large

Hello, I have 2 "web" server both running AIX 7.3.4.  We are also running NB 7.7 master It looks like there are 4 versions of the "track_journal.v1.dat" file. I understand that the tracking file is tracking the changes for the acceleration. If I ...

dphelps by Not applicable
  • 1330 Views
  • 1 replies
  • 0 kudos

slowness in Media servers

After ther recent upgrade to 7.6.0.4 from 7.1.0.4 I observ slowness in AIX media servers which have 15 gigs of RAM. The backups which runs using these media servers runs with low throughputs and backups not progressing. Any suggestion for this ?.

how to restore data from an netbackup kms encrypted tape

hi, Am trying to restore from a netabckup kms encrypted tape. I have already imported my key database from my main site to my remote site. While listing the keys on the remote site, all the keys are being listed properly. Am getting an issue while ...

Resolved! System state restore Error windows server 2003 client

Good morning everyone I'm expiriencing trouble restoring system state on a windows client. I'm following this procedure: https://www.veritas.com/support/en_US/article.000081333 On the system state restore step I get error 2080 when I try to resto...

Labels