I have 4 tape drive on media server was running fine before but one day 1 particular drive never been used anynmore by the backup. Then I check like the following:
D:\Program Files\Veritas\Volmgr\bin>vmoprcmd -d
In our environment , we have noticed that the data content/Size written on the tapes are not up-to the actual capable size. when i check images available in a tape, i do see that there are Fragmented images(i.e. Expired images).
Need to kno...
I would like to know if anyone have deployed netbackup enviornment for cloud VMs like in Amazon, Azure, Openstack
basically i would like to backup machines created inside cloud using backup software
One soution i can think of - master,...
Backups are failing with status 23 and 24 for a particular media server.
Error Logs are as follows:
05/14/2016 03:30:50 - begin writing
05/14/2016 03:30:51 - Info bpbkar (pid=13624) Backup started
05/14/2016 03:30:51 - Info b...
We have Netbackup 7.6 and Datadomain as target
EMC-VNX is a NAS device.
Can i configure NDMP backup to DataDomain without VTL.
What will be best configuration method to backup VNX NAS to DataDomain
i am fresher going to da certification on Netbackup tool. please give me any suggestions as :
1) which certification will help me a lot to work on Netbackup all kinds of services.
2) materials which can be helpful for cracking the exam other t...
I want to use KMS to encrypt my off-site tapes that are duplicated using vault in NBU 7.7.2. The backups are not encrypted, just the vaulted copies. From my understanding this will also encrypt the vaulted catalog tape since it gets duplicated too....
I have the following error in netbackup , error 6 , realized connection tests with my VM 's and are all ok , I would like to know what other possible solutions.
19/03/2016 09:10:48 -...
I have a RedHat master - with lto6 tape drives and a few Windows 2012 R2 media servers.
The NUMBER_DATA_BUFFERS and SIZE_DATA_BUFFERS - are set on the Red Hat master - /usr/openv/netbackup/db/config - and work great.
However - when we set...
I have a similar issues as discussed in http://www.veritas.com/community/forums/using-bpdu... . I want to clarify if we list and identify the images need to cancelled and cancelled it, shall we call the cancelled backup duplicatye images again to b...
We have a SFWHA NBU cluster on windows 2008 R2 systems working on NBU 188.8.131.52.
Due to some issues we have lost the primary node and are now dependent on passive node.
Is it possible for me to rebuild the loast (Prev active node using B...
I am using win 2008 & 2012 servers and NBU 184.108.40.206 in a cluster server, I got the error 2001 which is nothing but NO DRIVES ARE AVAILABLE, but i have plenty of drives and all are working fine and it is a FULL backup.
In my environment we...
I am planning to configure NDMP backups in my backup infra.
I am using direct attached NDMP approach for my backups, was wondering is there any command specifically to configure tape drives to NDMP hosts.
I need help with nbu 7.5, My storage was mangled and reconfigured, now my not recognizing that the storage or the tape libraries.
I already excludes nbu the drives and redid the installation, but it still does not recognize, what other solution I co...
I am using NB 7.6.1 on RHEL 6.5 64-bit operating system hosted on IBM X3650M4 server.
This serve is used as Master as well as Media server. It is connected to IBM TS3100 tape using FC cable. (Direct connection)
Currently I am testing a Oracle DB ba...
Hi, we are planning to re-implement NetBackup on our environment. We are planning to have two servers at the main site and one at the DR site. Currently having SAN in place and block level replicating can be utilized. The master server at the DR will...