Subscribe to NBU notifications
In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.
In case you are not aware - you can subscribe to NBU notifications over here: https://sort.veritas.com/spec_doc Hopefully NBU 9 will be added to the list soon.
Hi All, I'm trying to find the differences between these two commands in Netbackup. In the Netbakcup 7.6 TroubleShooting Guide, there is the same explanation for the commands. So, I couldn't understand how they work separately. Can you help me to ...
Hi Team, previously we use to insert tapes in I/O slot of IBM TS3500 Tape Library and perform inventory in netbackup then tapes use to get insert in desired TLD(robot) which was working fine now when we insert tapes in tape library we have to ...
Hi, I need to read and restore information from LTO3 tapes using LTO4 or LTO5. Is this possible?? The netbackup version is 7.0.1 Please help me with this, I cannot find specific information about this.
Issue: I have just 1 drive in my server and i have enabled multiplexing to 2 already, for using the drive for multiple backup jobs. There are too many backup jobs in the server. And many of the jobs are failing because of error code "1: (196) clien...
I have installed new media server in the existing environment. Installation went smooth. I added the media server in the master server Now the issue I'm facing is when I try to assign or change the existing backup to the new media server . I get t...
Hello, I am running Netbackup 7.6.0.1 and I configured MSDP diskpools, all the backups go to disk. Later it is duplicated to tape. But there is my problem. Duplication is very slow and it never ends. Sometimes I have more then 100 jobs in that queu...
We have a Hyper-V cluster with 3 machine nodes, using a CSV connecting to an EMC VNX on two luns. We have two cluster volumes coming from 2 Luns off the VNX. We have two policies one for vol 3 and one for vol 4 vdh's. Each of the policies limits to...
Hi all, I've built a 2003 server with Netbackup 6 installed. When trying to do anything with the tape, such as erase or start a backup, I get an error and the drive goes down. When starting a job I can hear the tape loading up etc, then it just sits...
Hi All We have purchased a Netapp E series SAn EX2724,this can be managed only through SANtricity Stirage Manager Client. I need to know How I can configure Netbackup software v 7 to backup the LUN that is provided by the above NetappSAN to foll...
Hello I'm trying to connect an ACS library to a netbackup master server on AIX, I have the following error: #rcopinfo -p CENTRIC1 (ACSLS host) rpcinfo: can't contact portmapper: RPC: 1832-010 Authentication error; why = Client credential too weak ...
Hi, I am trying to write a Java program to connect to the netbackup master servers, get status reports of the back ups done on the servers and create graphs/tables. I am using JSch library to maintain the ssh connections. When I try to connect, I ge...
Just recently got engaged with a customer who has a specific Oracle RMAN backup failing time & time again. It was observed that it ran fine for about 2 hours before it bombed. Here is the error message. RMAN-00571: ==============================...
Just recently got engaged with a customer who has a specific Oracle RMAN backup failing time & time again. It was observed that it ran fine for about 2 hours before it bombed. Here is the error message. RMAN-00571: ==============================...
Greetings, I've looked all over and have seen conflicting ideas and need clarification. I have added my backup setup below. 1 Master & Media server with direct attached storage 2 Drive library direct attached ~40 TB (will grow in the 80 range whe...
If a customer is unencrypting all their tapes using NetApp DataFort and a Brocade Encryption Switch (these platforms did the initial encryption and both are EOL), and then if the customer encrypts these tapes using NBU, will the new encrypting of the...
advance disk created successfully. command is mentioned nbelow ; /usr/openv/netbackup/bin/admincmd/nbdevconfig -creatests -storage_server ri2007 -stype AdvancedDisk -media_server ri2007 on running below mentioned command i am getting err...
Hi All , We are going to do data migration form location A(source) to location B(destination).Now we have netbackup master servers at both location . We are planning to take backup of data from location A file servers on tape through netbackup a...
Hi All , i have Virtual Envionment For sharePoint 2013 server with the Following Criteria ,, 2 VM SharePoint 2013 / OS Win 2012 R2 / nbu agent 7.6.1.1 / Sharepoint in farm cluster 2 VM SQL 2014 / OS win 2012 R2 / nbu agnet 7.6.1.1 / SQL in Fail...
Hello Everyone, I would like to know regrading netbackup media server. Let me explain you about enviornment 1 - Master server - Solaris - version 7.6.0.1 4- Media server - RHEL 5.5 - 7.6.0.1 Storage unit is DataDomain, we have 4 dataDomains Jo...
SQL database backup is getting failed which is running through SQL database agent. We are unable to capture the backup of all database once it tiggers as per its schedule but we are able to take backup if we trigger the backup of failed Dbs saparatel...