cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation for Windows
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Dynamic Mirrored Quorum Disk

Hi Everyone - another question about Dynamic Mirrored Quorum Disks on SFW & campus clusters: I understand the procedure for setting up MS Failover Cluster on SFW is to first establish the Microsoft Failover cluster, then install SFW. After installing...

Resolved! remove a schedule

Hi all, I was playing around with the flashsnap option (on windows SFHA for Windows 5.1 SP1) and created 3 schedules. Now I want to delete these but can't seem to do that. When I right click and delete the schedule it says "OK" but it stills shows in...

eu22106 by Level 4
  • 650 Views
  • 2 replies
  • 0 kudos

Resolved! How do I migrate from MSCS to SFWHA?

Hi, I'm in the middle of a proposal and the customer ask us to describe the way (step by step) to migrate their MSCS (2003) to SFWHA (VCS)? do you know if Symantec has a procedure? Any recommendation? The customer requires minimal impact and smooth p...

Resolved! Start custom Ressource as admin?

Hi Ive made a custom ressource with a script. This Script trigger another script which needs Runas Admin rights. The Cluster cannot not start the second script as admin how can i manage this? I dont want to deactivate the UAC on the Server. Environm...

Sigi by Level 4
  • 1355 Views
  • 3 replies
  • 0 kudos

Resolved! Using SFHA on Windows, under VMware

We are considering options for clustering Windows (2k3R2, 2k8R2, X64) nodes that are actually VMware VMs (ESX 4.1).  Is there documentation that describes setting this up, and what limitations might exist?  For example, does using cluster effectively...

Gornak by Not applicable
Certified
  • 1540 Views
  • 4 replies
  • 1 kudos

Resolved! Replication Network stuck at "Activating"

I just had to recreate a replication set for an EV cluster (GCO only, no local HA) on SFHA/Win. I used the "Setup RDS" wizard and it created the primary without error and then the secondary. Now the secondary is sitting in "Activating" status and doe...

Resolved! Error v-52410-49479-150 running DR Wizard?

EDIT: This error number appears to be generic for the DRCW, as I figured out the DCM error and am now getting an issue with creating secondary RVGs. <sigh> I've encountered this error which doesn't seem to be documented anywhere. I'm trying to re-run...

Resolved! VCS on VMWare?

All, I'm in the process of doing some testing in our lab. Due to hardware limitations (labs are always the last to get updated hardware...) I have to run my Windows 2008 64bit systems on VM's using VMWare 3.5. I've got SFHA 5.1 SP1 successfully insta...

Resolved! DB2 with SFW comaptibility

Hi guys, I have a scenario where the customer is running DB2 on Windows platform and we need to replicate the DB2 data volumes to the DR site server. We will be using SFW with VVR option for doing this. But i am having a doubt whether this will work ...

Majid by Level 5
Partner Accredited
  • 417 Views
  • 1 replies
  • 0 kudos

Resolved! Dynamic mirrored quorum in campus cluster

Scenario: Customer wants to create 2-node Microsoft Cluster in a campus cluster setup: Array1 at building A and Array2 at building B with all volumes mirrored across arrays. My problem is with this section in the Admin Guide: "It is strongly recommen...

Marianne by Moderator
Partner    VIP    Accredited Certified
  • 759 Views
  • 9 replies
  • 0 kudos

Resolved! SFWHA 5.1 SP1 and SCSI-3 PGR

I'm trying to determine if when using a 3rd-party DSM does VCS still support SCSI-3 PGR? When using a DMP DSM then SCSI-3 PGR is supported, but does this carry over when using a 3rd party DSM, in particular, the IBM SDD DSM?   Thanks...Mark

Mark_1 by Level 2
Certified
  • 513 Views
  • 1 replies
  • 0 kudos

Resolved! SFW HA and Fencing

dear all,   I would like to know if io fencing disk-based and server-based exist on SFWHA 5.1 ? I cannot find any information about it in the different guides. thanks, Hervé

Resolved! Use SFHAW 5.1 in iSCSI SAN environment

hello, all I have two nodes sfha for windows system installed,and share a IBM DS3300 iSCSI SAN storage. On iSCSI SAN,i created two logical drivers,and mapped to hostgroup which include my two nodes. These two logical drivers have a LUN number 0 and...

headbig by Level 4
Partner Accredited Certified
  • 573 Views
  • 6 replies
  • 0 kudos

can’t add disk to dynamic group

Dear all, I have installed VSF with MSCS and VVR option with the purpose to replicate my MSSQL 2008 (on win 2008 64bit cluster nodes) to a remote location. My issue is that from inside the Veritas enterprise Administrator console,   I can’t add the ...

ikoukoul by Not applicable
  • 1291 Views
  • 4 replies
  • 0 kudos

Resolved! SFW and SSD

Good Morning, We have set up a RAID 10 using SFW using several SSD drives and are running into some read performance issues.  We believe that the Device Type detection in SFW is partly to blame.  Our SSD drives are PCI bus (FusionIO) based and are ...