cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Migrating to a new SAN

We're in the process of moving to new datacenters. All servers will be moved over but the SAN won't. The SAN will be replicated to a new SAN in the new datacenters by our SAN admins. That means, the LUNs in the new SAN will be identical to the old, a...

Resolved! VMAX 3 support in Storage Foundation / DMP

Does anybody have information if / when Storage Foundation supports the new VMAX 3? The HCL only lists the "VMAX Series", and as the VMAX 3 is significantly different from the old VMAX, I am not sure if it is covered or not. 

Resolved! Manually addition of subdisk in vxvm

Hi, We have to some space in the disk, and we found that in our environment, one subdisk is using in two volumes which is under same disk group (Vaultdg) We have found out one subdisk which is free and can be added manually. Shall we proceed to ad...

Resolved! Flag status unknown

Hi All,   I am trying to configure the nfs under VCS and getting the Flag status unknown error for NFSRestart service. So can you please suggest me the solution to this problem.   Attached is the screenshot of the vcs console and main.cf configur...

Veritas Cluster addition

Hi All,   In our environment we are having 8 node Veritas cluster sharing a Filesystem in all servers, and now we have request to add 8 more nodes to the existing cluster. So please provide the steps as well the best way to complete the setup.   ...

Resolved! Doubts on VxVM,VCS Upgrade & root disk encapsulation

Hi All, I have the below queries please 1) In order to stop VxVM to load at system boot time, we need to modify /etc/system file.    What entries are to be commented out ?    Is it only rootdev:/pseudo/vxio@0:0 set vxio:vol_rootdev_is_volume=1 ...

Resolved! How to break root disk Mirror in VxVM

Hi All bash-3.00# vxprint -g rootdg -vh rootvol TY NAME         ASSOC        KSTATE   LENGTH   PLOFFS   STATE    TUTIL0  PUTIL0 v  rootvol      root         ENABLED  60821952 -        ACTIVE   -       - pl rootvol-01   rootvol      ENABLED  60821...

Collection from VRTSexplorer

Dear All I have some enviornments of SFHA and VCS installed on Linux and Solaris servers. I have output of VRTSexplorer logs for every system. As the VRTSexplorer contains almost everything collected, I wanted to know if is it possible to get the fol...

Resolved! VCS Switch Over problem

Hi, I do have som problems when testing Cluster Switch (2 node cluster VCS 6.2, Solaris 10). We test with init 6. Active node always hangs with : 2014/02/09 08:07:36 VCS ERROR V-16-10001-11511 (node1) Volume:vol_v1:offline:Cannot find Volume v1, eith...

Resolved! VxVM Mirroring

Hi,   I was configuring VxVM mirroring with site consistent on.   I have two disks from different controllers and formed a diskgroup.   Is there some rules on the size of the disks in case of mirroring: like both disks should be of same size, etc..  ...

Resolved! VxVM mirroring

Hi,   I was configuring VxVM mirroring with site consistent on.   I have two disks from different controllers and formed a diskgroup.   Is there some rules on the size of the disks in case of mirroring: like both disks should be of same size, etc..  ...

Resolved! VERITAS SFHA on Oracle LDOMs

Hi, I want to have some best practices for implementing SFHA 6.0 on a 2-node T5-2 (Control Domain, Guest LDOM). Basically we would want to have a 2-node cluster on the Guest LDOMs (not on the control domains) and  we would install VCS in the Guest LD...