vxprint and volume size
Hello, I am trying to understand the disk and volume size using vxprint, I can get the correct value by LENGTH/2 in KByes, but I am wondering why do I need to devide by/2 ?
Hello, I am trying to understand the disk and volume size using vxprint, I can get the correct value by LENGTH/2 in KByes, but I am wondering why do I need to devide by/2 ?
Hello everyone! When I finished disk group configuration, I cannot find disk group until I imported by manual,but after rebooting server,I couldn't find the disk group only if I imported again.following are my operations.Also the RVG was DISABLED un...
Can any one post the steps to replacing a disk that has shared dg group on CFS cluster on HP unix service guard with the below existing attributes. layout=mirror mirror=2 mirror=enclr enclr=emc0 enclr=emc1 logtype=dco dcoversion=20 ndcomirror=2 dr1=...
Before running vxvmconvert, there is this pvscan PV /dev/sdb1 VG VG_DATA lvm2 [150.00 GiB / 50.00 GiB free] After running vxvmconvert the above is NOT reported by pvscan, as expected. This is reported: vxdisk list DEVICE TYPE ...
Hi, I would like to take the Storage Foundation certification exam and I'd like to know what is the difference between 6.0 and 6.1. Should I just take 6.0 or is 6.1 better? How about Veritas cluster? Is there much to learn between 6.0 and 6.1? ...
Hi all, I'm in the middle of a storage migration project. I'm moving volumes from one storage system to another with mirroring. The OS is Solaris 10 update 11 and Storage Foundation version is 6.1 (latest patch level). While trying to mirro...
Hi all, On a 2 nodes system I did a fresh installation of SFCFSHA 6.2. There's an IBM array with shared Luns. There's only one path. Linux are 6.7 64bit built identically. After installation, llt failed to start. So I installed also the MR and pa...
Hello folks. I am running SFRAC 6.1 under AIX 6.1 Following few storage issues, i got disassociated plexes. while trying to reassociate them with their volumes using vxplex -g <mydg> att, i am hitting a panic on the server. the panic string is DS...
Hi Everyone, Can anyone please help me in understanding how does this product work and how is it licensed? Any document/link/licensing guide for the same will be of great help. Correct me if i am wrong, this is now Infoscale? I dont want to get in ...
I created a full snapshot volume some months ago from Server A to Server B. Both servers are running veritas cluster 6.1 under AIX Now when i want to refresh the snap vol with its original source; I stopped all cluster service on Server B and deport...
An an old machine - model "9000/800/rp4440 " (4 PA-RISC 8800 processors (1000 MHz, 64 MB)) with 16GB we have upgraded HPUX from 11.23 to 11.31 - Veritas from 3.5 to 4.1. Now, from time to time we have system with very high response time. Basically,...
Hi, I have 2 master servers that they are connected through cross cables (cluster). I would like to know what´s the reason for that (and I if can remove one of them).
Hello Friends, We have Veritas Volume Manger (4.1) configured in Solaris 10... We have a disk group: where there are two local disks along with several SAN Disks... I am looking for a way to migrate the data/volumes in the local disk to SAN Disk...
Hi, after upgrading my SFHA 6.1 cluster from Rhel6.5 to Rhel 6.7 and SFHA 6.1.0.200 to 6.1.1-300 , cvm is online, but cvmvoldg fails to startup for all diskgroups. (the installer ended with message ...successful....) Information in /var/log/messages...
My Environment SFHA Version = 6.1 installed RHEL Version = 5.6 installed Query I am able to install following 3 patches but could not able to install others ( cpi-Patch-6.1.0.500.tar.gz, cpi-Patch-6.1.1.400.tar.gz, gab-rhel5_x86_64-Patch-6.1....
I want to rename the below volume trans1-proddata_-01 to trans1-proddata_-01-temp vt trans1-proddata_-01 - ENABLED ACTIVE 1 v trans1-proddata_-01_tier1 trans1-proddata_-01_orig ENABLED ACTIVE 419430400 SELECT - fsgen pl trans1-proddat...
hi, I wish to find out how to replace a disk in vxvm with powerpath in solaris. i think: - vxdg -g group rmdisk disk or vxdg -g group -k rmdisk disk if the disk has many subdisks. -vxdiskunsetup disk or the above with vxdiskadm then cfgad...
Hi all ! I have some outdated RHEL5 installations with older vxfs 5.xx on. Some weeks back I popped out one of the mirrored OS disks and installed both RHEL7 and vxfs 6.2.1. I found no way to mount the old filsystems after the installation was don...
Hello ppl, I need quick help to understand the below situation as i am a bit new to VCS world . We have a global cluster running with 2 nodes on each site . Primary side (2) and secondary site 2. The secondary site however is complete idl...
Hi I am nwbie in vxvm, I want to understand a scenario,Kindly help me on this, a) In this vxprint o/p, what does these 4 plexes means.. which type of RAID configuration it is, if there are 2 plexes or 5 plexes what would be the RAID configuratio...