Topics with Label: Clustering

Resolved! Clustered NFS - What ports?

I am looking to implement Clustered NFS on Solaris 10 within an exsiting RAC cluster. However I want to know what ports it uses for security reasons. Is it the standard NFS ports 111, 2049 etc?

Resolved! Veritas Storage Foundation Cluster File System

I have 2 linux node on that i need to install Veritas Storage Foundation Cluster File System and after that created the share file system /data1 should be on shared storage and be available on two cluster nodes simultaneously as shared file systems. ...

VCS Fire Drill - dmpnodename

Hi, I have a problem testing VCS Fire Drill setup on HP-UX 11i i v3 We have a global cluster environment, and trying to test a Bronze fire drill config. I created fire drill service group manualy. When I try to bring FD service group online, the foll...

Resolved! SF CFS for RAC without GCO option

Hi Everyone, I have a cluster setup where I have a 2 node primary SF CFS for RAC cluster (for RHEL) and a single node as DR for the same. I am suing VVR to replicate the volumes accross to DR. I do not have the GCO option license. My question is, wha...

Resolved! not able to grow striped volume

root@L013XCRM03 # vxassist -g L013XDG01 maxgrow vol13 layout=striped Volume vol13 can be extended by 458752 to: 8847360 (4320Mb) root@L013XCRM03 # vxassist -g L013XDG01 maxsize Maximum volume size: 35758080 (17460Mb) root@L013XCRM03 # VxVM vxas...

Resolved! Splitting large CFS cluster

Hiya, I've been tasked with splitting are large CFS cluster (SLES11/SFS 5.1), no application service groups thankfully, just CFS sg's... I've identified where the splits can be made and the first task will be to take 2 nodes out of the large cluster ...

Resolved! resolving "Data Corruption Protection Activated"

Hello, recently I've noticed a number of servers giving the error below: VxVM vxdisk ERROR V-5-1-14519 Data Corruption Protection Activated - User Corrective Action Needed VxVM vxdisk INFO V-5-1-14521 To recover, first ensure that the OS device tr...

Resolved! VxVM vxdisksetup ERROR V-5-2-3535 c1t2d0s2: Invalid dmpnodename for disk device c1t2d0.

# vxdisk list | grep -i disk_1 Disk_1 auto:none - - online invalid # vxdisk -e list | grep -i disk_1 Disk_1 auto - - online c1t2d0s2 # prtvtoc /dev/rdsk/c1t2d0s2 * /d...

Resolved! Unable to Add New HDD into RAID 5 DG

Hi All, There was one Disk failed in RAID 5 DG. Which was replaced , Current vxprint -htg raid 5 output shown as below. bash-2.03# vxprint -htg raid5 dg raid5 default default 73000 1019571721.1080.DEV-ADC dm raid501 - ...

Resolved! not able to move volume from one dg to other

i have 2 dgs rootdg and datadg as shown below root@SDPPAP01 # vxprint -htg datadg dg datadg default default 71000 1288246437.26.SDPPAP01 dm mirrordisk c0t1d0s2 auto 20351 143328960 - v appsvol - DISABLE...

Resolved! solaris 10 with vxvm 5.0 on vvmware

hi i am new to both the community and veritas i want to install solaris 10 with vxvm 5.0 on my vmware can anybody here give me steps to do that i have already downloaded vxvm 5.0 and installed solaris 10 on my virtual machine thank you

Resolved! VEA Server has failed to start

When trying start vxsvcctl (vea) I'm getting error "VEA Server has failed to start..." In log file /var/vx/isis/vxisis.log I have found error listed below: Log file /var/vx/isis/vxisis.log is being appended, not overwritten czw 09 wrz 2010 11:57:54 ...

Resolved! Need Help on Migration

Hi, I'm trying to outline the steps to migrate an Oracle RAC (using ASM volumes) environment to SFRAC. Do you think the following steps are enough? Our setup will be similar to this: ---RAC-1 --- SAN--| |-------------...

Resolved! DataDg Group was not seen while installing veritas5.1

hi, how to configure the datadg diskgroup in the veritas5.1. there is no option displayed while installing storage foundation. but in the veritas 5.0 there is option while installing the product to give the datadg how to get it in the veritas5.1. ...

Resolved! I do not understand the situation arose

Hi Friends I do not understand the situation arose All i/o channels active stated. san-switch device firmware upgrades. Was a sudden san-switch reboot . the san-swtich of the i/o channels disable. the normal state of other channels ...

Resolved! 10 dmpdaemons occupying all CPUs

10 dmpdaemons occupying all 4 CPUs but still can connect the server via telnet and excute commands except vx commands.. like vxdmpadm, vxdisk, vxdctl... How can I jump out from this..

VXIO Notice - Veritas Volume Manager (with CVM) 5.0 MP3 RP4

I have installed veritas volume manager with CVM for Oracle RAC. The platform details are as follows, Platform: Sun SPARC OS: Solaris 10 U8 Cluster Software: 3.2 U3 VxVM version: 5.0 MP3 RP4 When the master node is rebooted the following messages a...

Resolved! I need VxFS5.0 & VxVM 5.0 for RHEL5 i686

Hi, I am getting frustrated with the 'Storage Foundation and Veritas Cluster Server High Availability Solutions' Version and it's OS and Platform compatibility. I need you kind help. I have the following infrastructure: OS: RHEL 5 #uname -a Linux...

Resolved! OC site has RHEL 4.4, DR site has RHEL 4.8, is this supported?

As the title says, We have Redhat EL 4.4 or Redhat EL 4.5 on our OC site, and we will need to install Redhat EL 4.8 on DR site as Dell certifies 4.8 on their new servers. Both will be x64... I need to make sure if: 1. SF 5.0MP3 can be used and supp...

Resolved! could not able to launch the Vea after Installing the veritas 5.1

hi, while upgrading the veritas 5.1 could not able to launch the VEA. Then we came to vea not included in the 5.1 package so i downloaded and install the VEA - VRTSobgui package from the symtantec site. After applying this package also the vea is ...

VOX

Discussion Posts