Hi, I m a new bie to Storage Foundataion and High Availability. We are configuring SFHA 5.1 SP1 in our setup with EMC Clarion as the storage, and would like to know the below 1. Can VxDMP and EMC Power path co-exist on the same server? 2. What should...
Hi, hopefully someone can help. Have a disaster recovery test system which does not appear allow filesystems to operate using direct i/o option for Oracle 9i. The filesystem mounts, but the direct i/o option seems to be ignored We suspect its ...
Hi, sure seems I'm missing something(s) easy and/or obvious, but I have tried a lot of stuff and am getting nowhere... Platform is a very legacy Sun E2900 with dual SCSI internal disks and FC to an external array, with Veritas VM in charge of all the...
We have a client who had the following requirements: Implementing a two-node Oracle RAC 11.2.0.3 on top of SFRAC 5.1.Presenting ASM disks directly to the system without using CVM volumes (Bare-metal). This is applicable for all ASM disk groups, incl...
Hi, I have two node cluster and today I ran Virtual Fire Drill in order to see if everything is OK. I've noticed I'm getting errors such as: * udid.vfd: Failed to get disk information for disk san_vc0_13. * udid.vfd: UDIDS for device <san_vc_8 do n...
If i have SAN Booted server with Boot disk encapsulated in VxVM and when LUN is replicated to BCP Site and Presented to another server, it is bootable at BCP Site despite the Device paths presented to the server at BCP Site will be different from t...
Hi Guys, I am facing some CHS geometry related issue while migrating data from one lun to another under Veritas DG. the below output shows the difference in geometry after initializing the disk. The OS sees this disk without any issues but when veri...
Can anybody would help me with the below, I was asked to connected some LUN to our HP-UX servers(11.11i) which we have founcation suite (VXVM3.5/VXFS3.5)----It can only installed with this version for the HP-UX11.11i. I was told not need to install ...
Hi, Can anybody list the 'Special' operations that are performed only by a CFS primary node for an FS, like creating ckpt, etc. Need to get more info on this. Thanks.
SunOS 5.10 Generic_142900-09 sun4v sparc SUNW,Sun-Fire-T2000 VERITAS Storage Foundation for Oracle RAC 5.1 I have sucessfully configured CNFS however I want to manipulate the NFS share to only allow ceratin hosts access. I understand how to do this ...
Hi Everyone, I currently have Oracle 10G R2 running on SF CFS for RAC on RHEL 5. Considering that I want to move to SF RAC (the full suite where CRS is handled by VCS) without migrating to Oracle 11G, what options do I have?
Hi, I need to create a cluster with Solaris Cluster on two nodes with shared FC storage, Solaris 10 and VxVM 5.1 , what is the best way ? I've read than Solaris Cluster is not compatible with DMP and VxVM 5.1 not compatible with MPxIO. Thanks for you...
Hi , This is the vxdisk status: emcpower8s2 auto:sliced GCdg01 GC1dg online shared emcpower9s2 auto:sliced GC1dg02 GC1dg online shared emcpower10s2 auto:cdsdisk GC1dg04 GC1dg online shared how can i cha...
Hello, I'm using rhel 5.5 64bit. I would like to know about the possibility of using vxvm with native Linux multipathd instead of the bundled vxdmp pathing software. Is this possible, or recommended? why or why not? Cheers, Marc
I am writing to ask for help for the FC LUN connection. Now we have the Oracle M3000 Server, Qlogic HBA Card, Netapp Storage and Cisco MDS FC Switches. Curretly we have the new LUN be created on the Netapp Storage and exported to this M3000 Server. S...
Hello All - I have a Hitachi AMS 2300 array with 2tb presented to my solaris x64 host. SF/HA 5.1, SP 1. I am trying to encapsulate the device via vxdiskadm, and keep getting the following error. I have searched, but cant find anything on this e...
Solaris 10 U8, Sf 5.0mp3 I have a solaris machine that has MPXIO enabled and all of the vxvm volumes were built using MPXIO devices. File system have already been created and they contain data. Can anyone tell me if it is possible to disable Solari...
Hi support i am going to upgrade my two new HBA cards and install in different slots on SUN V490, the disk device names cahnge from c1t50060E8005BD3511d0 to c4t50060E8005BD3511d0. Does VX dg recognize the new disk in the current dg autmatically. Wh...
Hi Can some one pls let me know what should be i/o policy setting for load balance on system running Oracle Enterprise Linux 5.1 connected to Symmetrix ( DMX4) array , since currently we only 2 paths to DMX 4 and we added 4 additional 4 FA's and i/...
Whenever I try to backup the configuration, warning is shown as below. Also when i try to restore it, the operation fails. /etc/vx/bin/vxconfigbackup -l /opt/configbackup Start backing up diskgroup abcdg to /opt/configbackup/abcdg.1294657147.185.sys...
