cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! Plex in detached/active state

We have a plex in a detached/active state after losing fibre connectivity on the lun. Other luns were recovered by running vxreattach after the fibre issues had been sorted. All paths to the disk look fine. Will appreciate any suggestions to get this...

DanieV by Level 2
  • 1723 Views
  • 5 replies
  • 0 kudos

Resolved! all vx* command hung

Hi All,  I'm running vcs and vxfs on solaris 10 with DMP. Recently we had an issue which all vx* command were hung. It cause the several service group was unable to start. Not much thing i can check because all vx* command is not responding. From /...

raunaz by Level 4
Certified
  • 1388 Views
  • 2 replies
  • 1 kudos

not able to initialize the disk

I had a disk under VxVM control. I removed it from VxVM control. Again when I added the same disk, it is not allowing me to initialize .Also I feel, it is showing wrong multipaths in vxdisk list output. root@dbpdadc42> vxdisksetup -i c0t5005076801405...

dksingh9990 by Not applicable
Partner
  • 1120 Views
  • 4 replies
  • 4 kudos

Apache monitor in Linux RHEL 6.2 with SF 5.1SP1

Upgrading Linux RHEL 6.1 - using sfha-rhel6_x86_64-5.1SP1PR2RP2  on a VCS cluster, has a problem with the Apache monitor script, I checked in the bundled agents guide for a debug mode.  The Apache mount point is a shared resource and started by VCS a...

lex13 by Level 2
Employee
  • 558 Views
  • 3 replies
  • 0 kudos

Resolved! not able to start vxconfigd

vxconfigd is not running as reported by vxconfigd mode while starting vxconfigd by vxconfigd -k below error VXVM vxconfigd ERROR V-5-1-0 segmentation violation -core dumped.   I tried to mv the disk.info to a backup file and then restarting vxconfigd...

symsonu by Level 6
  • 674 Views
  • 1 replies
  • 0 kudos

Resolved! Maxuproc not get updated even after reboot

Hi, Got a update to change the "maxuproc for wt82369 by 1.5 times" , While verifying we make necessary modification on the Global (wt81958). Normally  there is a relation between max_nprocs value and  maxuproc value. FYI.. maxuprc = max_nprocs – rese...

Resolved! Cannot vxdisksetup EMC disks

Hello Experts, I have an EMC AX4-5F attached to 2 servers. Both internal disks of the servers have been initialized, encap and mirrored with Veritas. But my problem is to initialize the EMC disks. Btw, im new with Veritas, hope you experts can help t...

Jack_Ab by Level 2
  • 3046 Views
  • 7 replies
  • 1 kudos

Resolved! raid5 vol growth

Hello, im trying to grow raid 5 volume and file system with exact same size disk as others. I have the following error. Could you please guide me. This box running Solaris 10 update 8 and VxVM 5.0 mp3 rp4. # vxprint -htqQ -g testdg dg testdg ...

kodaali by Level 3
  • 430 Views
  • 1 replies
  • 0 kudos

Resolved! VEA configuration failed Unable to restart vxsvc!

Hi, When i try to upgrade my VERITAS to Version 5 MP3 , i got the below error and my upgrade failed. VEA configuration failed         Unable to restart vxsvc! Please suggest me  if you faced the same problem and you hav ethe solution for this. My Se...

Deeban by Level 2
  • 375 Views
  • 1 replies
  • 0 kudos

Resolved! Problem with internal FC disk replacement on SunFire 280R

Hello, We replaced failed FC drive and all looks good at OS level. However, under veritas control it is showing as error and everytime we run vxdctl its generating new error devices. We cleaned up the device tree (both veritas and OS : removed disk f...

kodaali by Level 3
  • 894 Views
  • 4 replies
  • 0 kudos

Resolved! Mounting a Volume after reboot

Hello list   I want to learn more about Veritas Storage Foundation Basic. First to test if will be useful for my projects and second to get the knowledge. It hink it could be very useful on a larger XEN environment Step one So under VMware Worksation...

Resolved! vxconfigd not starting

when I try to start vxconfigd, I am getting this error:   15:39:15 /etc/init.d : # vxconfigd vxvm:vxconfigd: NOTICE: ddl_make_dll_info: Invalid library - libvxhpeva.so vxvm:vxconfigd: NOTICE: ddl_search_and_place: Can't make dll info   vxvm:vxcon...

DanTek by Level 3
  • 2434 Views
  • 14 replies
  • 0 kudos

Resolved! Using vxassist to break mirror?

Yesterday I was able to mirror data from a striped volume onto a concat space: vxassist -g calendar01dg -b mirror u01 layout=concat alloc=calendar01disk1 This worked just fine, and now I need to break the mirror leaving the new space and just droppin...

Resolved! New disk "ERROR" in vxdisk list

I have 2 new SAN disks attached to a host.  One looks normal and Veritas can see it and initialize it.  The other, shows an "ERROR" in vxdisk list.  vxdisk list DEVICE       TYPE            DISK         GROUP        STATUS c0t0d0s2     auto:none   ...

Resolved! Insufficient space to mirror?

I am in the process of moving data from old SAN storage to new SAN storage.  I have a disk group that looks like this: Disk group: calendar01dg TY NAME         ASSOC        KSTATE   LENGTH   PLOFFS   STATE    TUTIL0  PUTIL0 dg calendar01dg calendar0...

Resolved! Veritas clean meanings of fsdb command ?

Hello everyone. My customer have solaris 9. The system installed products to SF4.1MP2RP4 , sun-cluster 3.1 and MPxI/O. I saw the dmpevent.log. ==================================================================================================...

taesun by Level 3
Partner
  • 962 Views
  • 2 replies
  • 0 kudos

Resolved! I do not understand the situation arose

Hi Friends I do not understand the situation arose All i/o channels active stated.   san-switch device firmware upgrades. Was a sudden san-switch reboot . the san-swtich of the i/o channels disable. the normal state of other channels ...

taesun by Level 3
Partner
  • 1024 Views
  • 2 replies
  • 0 kudos