Resolved! Best practice for resizing VXVM volumes?
Hi, What's the recommended practice for resizing a VXVM volume and filesystem? Thanks!
Hi, What's the recommended practice for resizing a VXVM volume and filesystem? Thanks!
Hi Had a mirror between to SAN arrays A + B on an older solaris 7/32b + vxvm 3.1, which needs to migrate to new vxdmp version. Shut solaris 7 down, moved SAN B luns to new solaris 10 + vxvm 5.0, which now fails to import vxdg's, even after running ...
Hi, I have installed VXVM6.0.1 SF with trial version on Solaris11.2 in VMWare workstation. While installing the installer asked to set lwp_default and stksize to 0x8000. I have done it and completed installation successfully without any issue. A...
Hi, Here's the situation: Two nodes share the same luns, one system is Sol 10 with SFCFSHA 6.0. Some dg/vol created and configured to 6.0 cluster. Install another node to RHEL 6 with SFHA 6.2, after then, all the disks became error in Sol 10 no...
We have a request to upgrade all of our SF to SP1RP3. Some may already be at this level. How do you verify? When running a swlist on the HP-UX 11.31 server: VRTSdbed 5.1.100.000 Veritas Storage Fo...
we have a Solaris 10 X86 "147441-12 " with vxvm version 5.1 installed on a X6270 M2 sun server , The customer have HW raid "RAID 1" configured .. 4 disks configured giving 2 disks to the O.S. these 2 disks are encapsulated using vxvm for rootdisk a...
Team, Just a small question, Server X and Y are in cluster with shared DG Suppose a server X shows appdg free space in 100GB and in Y server Disks are showing in deported state. Do the size of the appdg shows the same after importing it to Y ...
Hi, I want to migrate powermt device to vxvm and I want that disk to be created in veritas volume group without dataloss . Please share the step..
Yestarday, I had two drives in my storage san fail. The san monitor reports that all the physical drives are fine. bash-2.03# vxdisk list | grep AMS AMS_WMS0_0 auto:cdsdisk remote996006 remote9960 online AMS_WMS0_1 auto:cdsdisk remot...
Environment details SFHA = 6.1 OS =RHEL 6.3 Primary Site = 2 Nodes DR Site = 1 node Agenda - Suppose Primary site 2 nodes are connected with SAN(SAN1) and also with SAN(SAN2) - Diskgroup is configured on SAN1 - VVR is also configured from Pri...
Hello, i have a RHEL System with Storage Foundation as Volume Manager. In a Disk Group i have 14x146GB LUN´s from a EMC² VMAX Array. After extending the LUN´s to 757GB the Volume Manager thinks the Disk is 432GB in Size. Maybe it is a OS Problem, bu...
Server is in contriol of Vxvm, We have to create a new filesystem wind_index1 in oradatadg diskgroup. Task to do : On Server sydney, please add a new mount point /wind_index1 of 91GB. Free size availavbe is 109 GB in disk group ora_datadg Belo...
Hello, I have the following issue. sunstation1:/root# vxassist -g DG-DB001 maxsize Maximum volume size: 326191104 (159273Mb)------------------------->It is showing that volume can be increased up to 159273Mb sunstation1:/root# sunstation1:/ro...
Dear support I have a cluster CFS with 2 nodes. need to know if they have impact when adding 4 nodes to the configuration. Thanks in advance.
Hello everyone, I'm in the process of migrating a Solaris 5.10 server to Linux Red Hat 6.4 At this point, I'm trying to convert the byte order of some volumes that come from Solaris in my Linux server using the following command: /opt/VRTS/bin/...
Dear All, I added a LUN to a specific volume and realised that I added it to the wrong volume. To remove the LUN the following command was run : "vxdg -g dg rmdisk vsp-xx-xx" I was then prompted to run the " -k" option to remove the disk. However...
hi, i have an physical box with solaris 10 and usualy an DG is imported on this host.i wish to have this DG up and runing inside a non-global zone created in this box.how i proceed in order to do that? should i presents the disks which make up t...
We're in the process of moving to new datacenters. All servers will be moved over but the SAN won't. The SAN will be replicated to a new SAN in the new datacenters by our SAN admins. That means, the LUNs in the new SAN will be identical to the old, a...
hi, I wish to check a thing. In production could i use online the command #vxrecover -sb volume in order to synchronize the plexes under this volume,or raid5 subdisk recovery? I mean if there is I/O on the filesystem on this volume.tnx a lot.
Hi, We have to increase size of below filesystem. by 100GB however, I am confused which disk and diskgroup I have to check. When I checeked vaultdg41 I found 6 GB of space free. But, when I checked vxprint o/p it shows volume v41 with subdisk emcpo...