cancel
Showing results for 
Search instead for 
Did you mean: 
Storage Foundation
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Resolved! VxVM Migrate Data and remove the disk

Hello Friends,   We have Veritas Volume Manger (4.1) configured in Solaris 10... We have a disk group:  where there are two local disks along with several SAN Disks... I am looking for a way to migrate the data/volumes in the local disk to SAN Disk...

Resolved! LUN removal in Solaris 10 10/09 with VxVM 5.1

Hello, I was assigned the removal of 86 unused LUNs in: # uname -a SunOS server 5.10 Generic_142900-09 sun4u sparc SUNW,SPARC-Enterprise # # cat /etc/release Solaris 10 10/09 s10s_u8wos_08a SPARC Copyright 2009 Sun ...

ferocci by Level 2
  • 928 Views
  • 2 replies
  • 0 kudos

Migrating VxVM volumes from a V240 to a T4-2 Ldom

Hi all, I have a V240 running Solaris 10U08 with VxVM 6.0.000 that I need to migrate to a Solaris T4-2 Ldom (LDM 3.1). I have loaded the software that is in source onto the LDOM and presented the required SAN LUNs that match source into the guest LDO...

Resolved! Storage foundation linux - increase lun

Hi All, I am new on storage foundation solution, and also on the company. I have a oracle database running storage foundation and i just need increase a database lun. Do i need to do something on storage foundation configuration? or can i just inc...

Contact to get again Veritas software - version 5.0 MP4

Hello,   In 2012 due to site accessing problem we have downloaded the Veritas software with temporary S/N provided by Symantec. Now we need to download again for a server re-instalaltion. Could you help where or how can we contact to get the softwa...

Truong by Level 3
  • 580 Views
  • 2 replies
  • 1 kudos

Resolved! Can't initialize Volume after disk replacement

I need to initialize one of my volumes but it tells me that I can't becuase it says: # vxvol -g ccs-data -f init zero pdfformsvol VxVM vxvol ERROR V-5-1-1212 Volume pdfformsvol has plexes that are not EMPTY v pdfformsvol - DISABLED CLE...

Resolved! Solaris OS compatibility for SFHA Version 4.1

Hi All, Arch=Sparc OS=Solaris 10 Release=3/05 Initial Release SFHA=VCS,VxVM,VxFS Version=4.1 I'm planning to upgrade Solaris host from Initial Release to Latest Release (Solaris 10 1/13 Update 11). Also the host is running VxVM,VxFS & VCS ev...

disk in error state in vxdisk list

disk replacement was performed for  c1t2d0s2 and after that we are not able to add this disk into dg. I can see duplicate entry of c1t2d0s2 in vxdisk list   abcmas3{root} #: vxdisk list DEVICE       TYPE            DISK         GROUP        STATU...

symsonu by Level 6
  • 7616 Views
  • 5 replies
  • 1 kudos

Setting A/A array to Active/Standby in DMP

I have an A/A array and one the controller has frequent intermittent errors, so I want to get the good controller as the primary and the faulty controller to standby until the controller is fixed.  I have looked at vxdmpadm commands and I am little c...

mikebounds by Level 6
Partner Accredited
  • 390 Views
  • 1 replies
  • 0 kudos

Resolved! Creating ext4 file system on a vx volume?

Long story short, we are trying to utilize block based backups for some 30 million files on a 2 node A/P VCS. Product will not support vxfs, and one of our ideas was to simply keep the vxvm pieces so the scripting and VCS controls all work the same, ...

move a dg to a new server

I have 2 solaris servers running storage foundation 5, using the same attached san but not same disks. I need to move 1 disk group (1 lun) from server one server to the other. The storage team has agreed to rezone the lun so both servers can see it...

Resolved! How to use fsdb to repair VxFS file system?

The symantec offcial Manaul page of fsdb command is very simple with little information about its usage. Is there any guide to use fsdb command on all OS platform (i.e. AIX, HPUX ,Linux etc...) ? How to use fsdb to repair VxFS file system? My ult...

xhawk by Level 4
Partner Accredited Certified
  • 1599 Views
  • 2 replies
  • 0 kudos

Veritas Cluster addition

Hi All,   In our environment we are having 8 node Veritas cluster sharing a Filesystem in all servers, and now we have request to add 8 more nodes to the existing cluster. So please provide the steps as well the best way to complete the setup.   ...

Resolved! Doubts on VxVM,VCS Upgrade & root disk encapsulation

Hi All, I have the below queries please 1) In order to stop VxVM to load at system boot time, we need to modify /etc/system file.    What entries are to be commented out ?    Is it only rootdev:/pseudo/vxio@0:0 set vxio:vol_rootdev_is_volume=1 ...