cancel
Showing results for 
Search instead for 
Did you mean: 
System Recovery
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Useful Veritas System Recover 22 - Links

Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...

klauskresnik by Moderator
Employee Accredited Certified
  • 1948 Views
  • 3 replies
  • 5 kudos

'How To' videos for Veritas System Recovery (VSR)

How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...

criley by Moderator
Employee Accredited
  • 2615 Views
  • 2 replies
  • 6 kudos

Intel S5500BC Motherboard onboard NIC not found

HI, After our server hardware became unstable we have purchased new Intel Server with S5500BC motherboard.  Everything seems to work OK but the SR Restore Disk cannot find the NIC adapter/s on the new system!  We are backing up to a Seagate BlackArmo...

RuddvD by Level 3
  • 251 Views
  • 1 replies
  • 0 kudos

BESR 8.5 Restore - NO CD DRIVE

Hi, Sure this a noob question, but need to ask anyway.   I have completed a few restores to dissimilar hardware but have encountered the same issue for 2 like servers recently - Dell 2970 restored too from older HP servers - everything came back up ...

KAC by Level 3
Partner Accredited
  • 208 Views
  • 1 replies
  • 0 kudos

BESR 2010 - Baremetal Restore (Disimilar Hardware)

Hi All, BESR 2010, Windows 2008 SP1 X64, Exchange 2007SP1 6 Physical Disks, RAID-1 x 2Physical Disk each, 3 Volumes Presented to Windows, C: , D: , E: , Installed BESR2010 and successfully took the whole backup on a External USB Drive The Test Box...

Resolved! Setting the NIC speed/duplex

Hi, I've created a custom BESR boot CD for my ProLiant servers and have included all the drivers I think I'm going to need. When I boot from the CD everything looks good and I am able to set a static IP address and ping other servers on the network....

SRS 6.5 Perc 3/di PowerEdge 2650

I'm trying to do a test restore of a PowerEdge 2650 MS 2003 Exchange Server to another PowerEdge 2650 with a Perc 3/di raid controller, and the raid disk I've created does not show up in the disk/partition manager, and I cannot perform the restore.  ...

Seek Error but recovering to Virtual!!

Hi All, I am recovering an image of a server to a VM and it fails right at the end with: Error EA39002E: Seek Error. I looked for this online and found two technotes in relation to this issue with 6.x but I am using ver 8.5 Also I am recovering to V...

BESR Cannot Access Network Drive

I have booted to the recovery disk and when I try to map a network drive I can access only one computer one the network (a win2000 box) all the XP machines and the 2003 Server are not available either through the tree view or the UNC path names. Any...

ckit by Not applicable
  • 232 Views
  • 1 replies
  • 0 kudos

custom srd doesn't pass driver validation

I downloaded and created an srd (Symantec Recovery Disk). Then i ran driver validation and i have 2 missing drivers. The detailed file is: The following devices do not have drivers in the Symantec Recovery Disk. Packet Scheduler Miniport Teefer2 M...

shahar by Level 4
  • 286 Views
  • 2 replies
  • 0 kudos

Resolved! BESR 2010 Deduplication supports ?

Hi All, I've just Upgraded the Symantec Backup Exec System Recovery 8.5.5 into 2010 and wondering if there is any deduplication supports in this 2010 release ? because from the settings it looks the same nothing is different ? see the following su...

BESR 8.5 Recover WinXP Pro in Extended Partition Fails

I need to migrate my hardware platform. Current hw has {on a single physical volume} WinXP Pro on primary partition C:, extended partition with WinXP Pro on logical drive D:, applications are installed on logical drive E:, and data is keep on logical...

VernonX by Level 2
  • 336 Views
  • 4 replies
  • 0 kudos

Resolved! BESR System Recovery Disk

I am using Symantec BESR v8.5.1, and I have no option to create a custom SRD (System Recovery Disk). I need be able to load custom drivers to a Dell Optiplex 760 (NIC Intel 82567, required .inf e1k5132), and the current disk does not have the drivers...

jcoz by Level 3
  • 618 Views
  • 6 replies
  • 0 kudos

Backup Exec System Recovery crash in symsnap.

Hi, I searched the whole site for a similar crash but only found different ones. BESR Serber Edition V 7.01.21808 MS Windows Server 2003 SP2 No clustering System crash caused a BSOD and memory dump creation. According to memory.dmp analysis, it'...

SDR will not detect SATA drives - SBS Server Edition

OS is Windows SBS 2003 Controller is Promise FastTrak TX4310 Storage driver is latest vista compatiable driver from Promise I have a Promise FastTrak TX4310 RAID controller setup as RAID0. When booting from the SDR to recover the computer, the SATA ...

RayBas by Level 2
Partner Accredited
  • 479 Views
  • 5 replies
  • 0 kudos

USB Drives not recognised during recovery !!!

HI, I am new to Symentaic Recovery, although I have been using the backup program for a few years, and never had to recover. Now, when I boot from the recovery disk (Version 7), it does not recognize my external USB drives. When I run DriverValida...

newbie100 by Not applicable
  • 166 Views
  • 1 replies
  • 0 kudos

BESR and MEGAIDE.sys driver

Im doing a proof of concept for a customer of BESR we are using the BESR 8.5.5 for WIndows 2003 Small Business Server 60 day eval we installed and created the Backup File. No we are booting with the SRD and we cannot see the Raid1 Logical Drive ...

System Recovery and Raid1

Does anyone have any further information on how to create recovery points for a simple Mirror raid?  I was told that you could do it. I have a (2) 160GB drives set up in a Hardware Raid1.  When I go into the System Recovery software, it does not see ...

thardiek by Not applicable
  • 242 Views
  • 2 replies
  • 0 kudos

Resolved! Error creating the custom environment

Hi All, I'm trying to create a Customized System Recovery Disk to recover a HP ML350 with a  P400 controller. Now I added the 2008 drivers to the CSRD as previously advised by a Symantec Employee as i'm using BESR 8.5.3 which loads the 2008 environm...

Resolved! SRD for Optiplex 760

I am trying to connect a Dell Optiplex 760  XP box to the Network from the SRD. I have  8.0 and 8.5  SRD's made on this particular machine. I keep getting Network adapter error " Could Not Get Network Adapters"   We have tried a new SRD with the dri...

Bakinup by Level 4
  • 220 Views
  • 4 replies
  • 0 kudos

BESR 8.5 for server not seeing one of my drives

         Install BESR on my windows Server 2008 Std server.  It sees all my drives except for one.  It just so happens that drive is a mirror drive.  Running the windows 2008 internal driver for the nvidia raid controller on the Motherboard (nothing ...

Complog by Level 3
Partner
  • 537 Views
  • 17 replies
  • 0 kudos
Labels