cancel
Showing results for 
Search instead for 
Did you mean: 
System Recovery
cancel
Showing results for 
Search instead for 
Did you mean: 

Discussion Posts

Useful Veritas System Recover 22 - Links

Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...

klauskresnik by Moderator
Employee Accredited Certified
  • 3810 Views
  • 6 replies
  • 6 kudos

'How To' videos for Veritas System Recovery (VSR)

How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...

criley by Moderator
Employee Accredited
  • 3654 Views
  • 2 replies
  • 6 kudos

Resolved! Exchange 2007 - Transport Roles

Hi All, I have successfully test recovered an Exchange 2007 server for a client. As part of the project I recovered one of their DC's also and was able to recover the information store. All looks fine in terms of mailboxes etc but when I tried to s...

Resolved! Questions on offsite copy of BESR8.5

Does the offsite copy feature feature of BESR8.5 uses the system resources of target node (node to be backed up)  twice while making the offsite copy? To be more precise does BESR 8.5 reads the data twice from the node to be backed up to create two i...

v2isr.exe Property Segment was not found

I created an image using v2icreate.exe.  That worked fine.  I can open and verify the image with v2ibrowser.exe, that works fine.  If I use v2isr.exe without command line parameters and I step through the gui then I can restore the image and it works...

sboyle by Level 2
  • 576 Views
  • 7 replies
  • 0 kudos

BESR 8. - Command Files - How to pass parameters?

I just recently started using BESR and it seems like a comprehensive product. But I've run into a problem. I'd like to run command files (.CMD) before and after a backup is run, but the BESR interface for setting up the call doesn't allow for passing...

Resolved! Custom SRD Doesn't Contain Drivers I Specified

When I create a Custom SRD, I use the SRD 8.5.5 as a source disk. Then I add drivers using the Create Custom SRD interface. The drivers are stored in a folder on the Desktop of the same server - the Custom SRD wizard accepts the drivers and enumerate...

undejj by Level 3
  • 695 Views
  • 4 replies
  • 0 kudos

Resolved! BESR Desktop Edition Scope

I got two questions about these version. 1. do you now if BESR Desktop Edition can restore files or folders without restore the entire system and without the purchase of any other option like GRO ?? 2. can you use the BESR Desktop console to connect ...

ITMngr by Level 3
Partner Accredited
  • 364 Views
  • 3 replies
  • 0 kudos

Resolved! Where is Backup Exec Retrieve?

I'm evaluating BESR 8.5 and am curious about the indexing capabilities described in the documentation (Symantec Backup Exec System Recovery 8.5 User's Guide) in Appendix A, "Using a search engine to search recovery points." It says: "Note: Symantec ...

BESR bringing down websites

Hi All, Have BESR 8.5.3 installed on a Webserver and according to their Web Administrator sites are "going down" around the same time that the BESR image is created. I have gone through the Event Viewer on the server and can't find anything. Has any...

Resolved! Error creating the custom environment

Hi All, I'm trying to create a Customized System Recovery Disk to recover a HP ML350 with a  P400 controller. Now I added the 2008 drivers to the CSRD as previously advised by a Symantec Employee as i'm using BESR 8.5.3 which loads the 2008 environm...

Gilly-Bhoy by Level 6
Partner
  • 1006 Views
  • 23 replies
  • 0 kudos

Resolved! After performing a "Repair" from Vista's "Programs and Features" the TaskBar Icon no longer works the same as it used to in BE SR 8.5 Desktop Edition

As the subject states i went into Vista's "Programs and Features" and then clicked on "Change" and clicked on the repair Radio Dial and then rebooted my machine.  I was able to peform a backup to a locally connected USB External Drive but the Icon di...

JPMTJR by Level 3
Partner
  • 501 Views
  • 9 replies
  • 0 kudos

BESR 8.5 2008 SBS Virtual Conversion

Hello, I am trying to convert a recovery point of our Windows 2008 SBS SP2 to a .VHD. The process runs for  almost 2 hours and then fails with the below message. I have tried this twice and can't seem to find any helpful information on the error. Ha...

Jason2404 by Level 2
Partner Accredited
  • 242 Views
  • 2 replies
  • 0 kudos

System recovery 8.5 - should I buy?

I have a Dell "server" - running windows 2003 server. There is no raid controller, so it runs windows dynamic disc on 2 harddrives. The problem is, there is not enough space, so I will have to make a copy to the new harddrive(s) Is BESR able copy dy...

Convert to Virtual Error

Trying to Convert to Virtual a few One-time backup's and they all come back with the following error: Result (0xebab0005 18 ERROR_ERRORS_EXIST Args [2] Arg (0xbab0012 Result (0xec8f1f48 25 VPRO_ERROR_CONVERT_FAILED Args [1] Arg (0xbab0012 Result (0x...

star541 by Not applicable
  • 188 Views
  • 2 replies
  • 0 kudos

Reading License Information - Very slow

Hi All, I have noticed on two of my customer sites that when I connect to any of their servers protected by BESR (8.5.3) it takes quite some time for the status on the bottum left of the console window to change from "Reading License Information" to...

Labels