Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...
How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...
Good Morning, I have a rather strange issue. I'm trying to backup using system recovery on one of my VMs. There are 2 USB backup devices that are on rotation that are plugged into the VM Host. The problem is, when the drives are plugged in, it does...
What ports need to be open on the client side for SSR management server to push packages like ssr client, symantec plugin or just effectively manage the client servers....
I have BESR 8.5 working with 2TB USB drive for backup. I am trying to add a 3TB USB drive as a backup location and it will allow me to select it but will not continue through the backup job creation. It just stops and will not continue when I click n...
Hi i uninstalled the besr rebooted install again rebooted and installed patch 9.0.4 rebooted, now i am unable to see the C & D drives in the BESR console page ? also i have run the partinfo but nothing found any partition errors. just found somethin ...
Hi I’m going to install SSR 2011 Management Solution that include in “Symantec Protection Suite Enterprise Edition” license that we have, and I would like to ask a few questions before that. It’s ok to install the SSR-MS on the same server with “Syma...
SBESR 2010 for SB, support rdx device ? If yes, how can I configure SBESR to backup the whole server using two rdx cartridge for daily rotation ? Thank you for support
Hi, I have a quick query, I am responsible for checking the backup notifications for our support company (approx 300 servers! Very time consuming but that is another issue!) The majority of these have offsite copy enabled but I am getting very frustr...
Good Afternoon, I will do a backup from a Linux Server with SSR. This linux is managed by Symantec Management Console. This server have mount a partition with only data. When I go to create a new backup in Managment Console, I only can select All Dri...
hi gurus, i need your advice. We're using Symantec backup 12 and it's working fine but currently the server is running out of space. I'm planning to buy a NAS and use the current server to run the Symantec backup software but put all the data on the ...
Hi Guys, I currently have 2 clients which both run Small Business Server 2011 standard. They are both HP Server's. They both run Symantec System Recovery 2011, both have NAS drives attached. We currently have it set up so that the Server's backup t...
I am having below scenario, Incremental compression Medium (Recovery Point Limit 17) Every 1 hours from 7:00 AM to 11:00 PM every day, Full At 6:00 AM every Sunday, now after follwoin this sunday all the previous incremental recovery points are ...
I was just on the MySupport portal to create a new case for SSR2011ms and I noticed System Recovery Management Solution 2013 As on option for product version Is there a new version out? I didn’t here anything about a new version or will it be out soo...
i got following errors every hour alternatviely.. Date: 4/18/2012 14:02:12 PM Notification Type: Error Priority: High Description: Error EC8F17B7: Cannot create recovery points for job: Drive Backup of New Volume (D:\). Error E0BB0083: Unable...
I have a backup routine where we swap USB disks out weekly. I have run into an issue where the backup jobs do not find the new drives after the old ones are removed. If I edit the job and specifiy the drive letter, in this case F:, it can find them ...
I wanted to know that following is possible or not. BESR 2010 installed on windows server 2003 ( SP1 or and SP2). and backup destination set to mapped network drive of windows 2003 or windows 2008 (R2, SP1 ) OS. and vice versa.?? can the backup stor...
Trying to resolve this known issue “Description: Error EBAB03F1: Operation aborted. Info 6C8F17E7: An automatic recovery point was not created because an earlier recovery point from the same job was still in progress. Details: Operation aborted” ...
SSRMS2011 and Symantec End point on Same Machine.. We had two same products of Symantec Inc, Symantec System Recovery 2011 Management Sulotion and Symantec End Point Protection. My question is that can I install both the products on same system?
Hey, I am to SSR MS 2011.I need Help...I am Successful in Add From my AD 2003,all Computers to SSR-MS and also Installed Plug-ins on tham...but problem is this..when I am Create a policy..assign a target define Schedule...... on agent gives a Error ...
I attached a USB drive to my NAS (the backup destination for BESR 2011 and, now, SSR 2011) so I could copy a recovery point. (I used the copy option from the Manage Backup Destination Tasks - selecting a recovery point & then choosing Copy. Yes, I kn...
hallo, ich habe zwar einen thread über dieses thema gefunden, mein problem liegt aber noch etwas tiefer. der "soll" zustand soll sein: 4x backup auf interne hdd (unabhängige systemwiederherstellungspunkte) 2x backup auf 5 externe hdd´s (ebenfalls u...
