Release Notes for Veritas System Recovery 22 : v22.0Veritas™ System Recovery 22 Readme : v22.0Veritas System Recovery 22 Licensing Guide : v22.0Veritas™ System Recovery 22 User's Guide : v22.0Veritas™ System Recovery 22 Manager Readme : v22.0Veritas™...
How to backup to Azure using Veritas System Recovery: https://www.youtube.com/watch?v=ulOdmKfD8Qg How to backup to Amazon S3 using Veritas System Recovery: https://www.youtube.com/watch?v=u3ptziLui0U How to perform a Bare Metal restore using Veritas ...
i have taken backup files and folder .files saved as .fbf format now i want to retrieve the orginal file from that backup location .please advise me how to get orginal format of the files
Since upgrade from BESR 2010 SP2 to 2011 we have noticed that our backups are taking longer than before. On the previous version we had the registry performance files in place. However for 2011 there appears to not be any files available? Does an...
I have some client pc’s managed with BESR2010MS And it seems some clients have Bandwidth control on and some are off My workstation in particular the bandwidth setting is on when I set it off I reopen the client and it’s on agene? Is there a policy t...
Hi Guys, I have a teething issue that I can't get to the bottom of and its driving me mad, I'll try my best to explain the situation. 1.) I have a Xen VM running Windows 2008 Std 32bit and this has been setup with WDS to run a PXE boot server for the...
I recently upgraded to BESR 2010. After installing the new version, I show in my logs that the Symantec SymSnap service runs every two hours. I only do the backups, once, at night and don't understand why this needs to use the VSS snapshot service e...
Hi We have just restored an image from a clients server to a test server in our office for testing. The length of time to restore the image was 11 hours and 40 mins. Data restored was 109Gb Restored from NetGear ReadyNas through 1Gb switch Test serve...
Hi all, we sell BESR 8.5 to our clients and usually have no issues. but with my current client the backup takes far too long. for example I set the system backing up 2 hours and and it has only done 4mb and is still on 5%, how can this be? System p...
SYMSNAP BSOD, Serious problem, no response Hi, I have been using LSR 3.03 for years on a Windows 2003 server but decided finally to upgrade to BESR 2010. The BESR 2010 install went smoothly, but attempting to copy the C drive to an unallocate...
Hello we have a few clients running both BESR 2010 and Shadow Protect from StorageCraft. One thing that I see the ShadowProtect has built in is a verification of Incremental Dependencies. I know that there is a Verify option that is part of the Jo...
Hello, We have deployed BESR 2010 to 3 clients so far, the latest has a 230GB Drive to do the Base image took about 2.25 Hours. This finished @ 1:15am but the Off-site copy did not finish till 7:48am thats over 6.5 Hours when the entire backup took...
Hi, I've converted a BESR backup into virtual disks, which I've attached to a Virtual Server 2005 VM. With backups created on other Intel servers it works perfectly. However, with backups taken from two HP servers (ml350g5), the VM is practically un...
Environment: Microsoft Windows 2008 Standard 64bit OS Partition marked for Backup as Backup Destination RDX Drive used as Off-Site location FTP Used as Off-site location I was going through my logs and noticed that most of my backups are between 7...
Regarding the Altiris/Symantec BESR 2010 Management Solution - I am doing some testing with this product before rolling it out across our network. In so doing a few questions have arisen; 1.) Once a backup policy has been created it must be appli...
We back up our Win2k3 Enterprise SP2 Exchange 2003 SP2 server with BESR 2010. Our Exchange 2003 logs are not being routinely truncated or purged Is there a way to have BESR purge/truncate Exchange 2003 logs like Backup Exec for Windows does or lik...
When trying to open the agent, it just hangs up on the connection bar. It's really slow and gets to the end but never connects to the server.
We have recently deployed a NAS which is connected via iSCSI to a Windows Server 2008 Standard SP-2. Initially BESR 2010 was creating recovery points, but now it keeps stalling at 5%. It appears the recovery point is created on the mounted drive and ...
Hi, this spertains to Backup Exec Small Business Server edition 2010, running on a MS Small Biz Server 2003, and I recently upgraded the Backup Exec from 8.5 to the 2010 version. The backups seem to be working but the Granular Recovery option is cau...
I am evaluating Backup Exec System Recovery 2010 Desktop Edition. I've been running a backup policy from BESR Management Solution from a server with weekly creation of recovery point sets, but I'm not quite sattisfied with the resulting time for a ba...
Is it possible for a initiated bakup job to resume after the client computer was shutdown. Does BESR 2010 resume the backup job from the point where it reached or just starts again. I consider this feature extremely important, considering that baseli...
Greetings to all I am an evaluator using Symantec Backup Exec System Recovery 2010 Desktop Edition. I have created a Backup policy which makes a baseline snapshot every new week and an incremental every day starting at 9:00. To minimize network loa...
