Appliance FC details : Appliance.FC> Show - [Info] FTMS state: disabled - [Info] Fibre Transport Deduplication state: disabled **** FC HBA Cards **** 06:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 06:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 07:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) 07:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) **** Drivers **** qla2xxx is loaded qla2x00tgt is loaded scst is loaded scst_user is loaded **** Ports **** Bus ID Slot Port Port WWN Status Physical State Configuration Type Speed Remote Ports 06:00.0 Slot5 1 21:00:00:25:FF:17:CB:99 Online Initiator Target(FTMS) 8 gbit/s 0x500308c3a39e109d 06:00.1 Slot5 2 21:00:00:25:FF:17:CB:92 Online Initiator Initiator 8 gbit/s 0x500308c3a39e1099 07:00.0 Slot6 1 21:00:00:25:FF:17:CC:E7 Online Initiator Target(FTMS) 8 gbit/s 0x500308c3a39e1005 07:00.1 Slot6 2 21:00:00:25:FF:17:CC:E6 Online Initiator Initiator 8 gbit/s 0x500308c3a39e1001 **** Devices **** Device Vendor ID Type Remote Port /dev/sg13 IBM ULTRIUM-TD7 0x500308c3a39e109d /dev/sg14 ADIC Scalar i500 0x500308c3a39e109d /dev/sg15 IBM ULTRIUM-TD7 0x500308c3a39e1099 /dev/sg16 IBM ULTRIUM-TD7 0x500308c3a39e1005 /dev/sg17 IBM ULTRIUM-TD7 0x500308c3a39e1001 **** Remote Appliances over FC **** Please scan for remote appliances over FC first Appliance.FC> Appliance.Settings> FibreTransport Initiator Show fc transport disabled