About A-H-S

A-H-S · 07-13-2010

We got massive Problems with the new Xentools 5.6 und BESR. After Installation of the Xentools 5.6 the SystemGui hangs ( for about 2 min you cannot do anything, then the System reacts for 1-2 sec.). If you stop the BESR services or go back to the 5.5...

A-H-S · 06-20-2011

Hello Rohaizad, which driver did you install in phase 9? Sometimes it is a Problem in the bios of the new machine. If you have sata-drives, check for IDE and AHCI mode. Control it in both systems, that the mode is the same. Regards Achim

A-H-S · 05-26-2011

Hello gavan, so you've tried my tips but with no success. But have you checked it with the repair option from the win 2008 64bit CD? Boot it from there until it finds your windows partition and try the repair option ( sometimes you have to do this 3 ...

A-H-S · 04-22-2011

Hello Treybo, when you do the restore, is there "restore drive Signature" activated? If so, deselect it and activate MBR and system Partition. If there are problems, activating the System Partition try this: 1.Boot the new with the orig. SBS2003 Serv...

A-H-S · 04-20-2011

Hello sQew, we are working with XenServer and VMware and have done it with 2003 and 2008 Server/SBS for several times in P2V projects. As I know hyper-v is for free, and there is no need for an extra license.

A-H-S · 04-19-2011

Hello sQew, try the following : Restore with: “Set drive active for booting OS” & Restore MBR Don't restore the drive signature. Try to restore not in the BareMetal mode. This is more work after the restore ( if it comes up...), but even better then...

VOX

User Statistics

User Activity

Problem BESR 2010 ( 8.5 ) with XenServer 5.6 ( XenTools )

Hello Rohaizad, which driver

Hello gavan, so you've tried

Hello Treybo, when you do the

Hello sQew, we are working

Hello sQew, try the following