Hi all,
Our environment as the following:
OS: redhat 6.5
VCS: VCS 6.2.1
Our server have two physical network port, namely eth0 and eth1.
We do create tagged vlan, vlan515, vlan516, vlan518, vlan520 based on eth0 and eth1.
We are able to create ...
Hi All,
We would like to have an extended RAC setting with SFRAC.
The environment as the following, there is 2 hosts, each connected with 2 shared storages.
We have an question about how the VCS I/O Fencing disk to be assigned?
3 LUNs from each st...
The environment as the following:
cfs 5.1, on Solaris 10 u8, with the latest patches
We did configure multinicb with Solaris IPMP probe based ip, and reside a VIP with resource type ipmultinicb.
When we try to pull both Heartbeats of the system, o...
Hi All,
Recently we did try to migrate the data from a mount point /A with around 90G data to other mount point /B, and the result as the following:
Use tar command:
cd /A; tar cfpE - . | (cd /B; tar xfpE -), it completes around 1 hr
Use vxdump an...
Hi All,
Our server is connecting to EMC CX4-120, with Sun Solaris 10.
We installed SF 5.0 with MP3 and rp1, the disk is able to see in both OS and VxVM by issue format and vxdisk list.
However, when we install EMC powerpath 5.2 SP2 after it, the po...
Hi All,
We figured that the problem is due to the VIP is being used by other. And it's strange that we can enable it by ifconfig command.
Thanks,
Xentar
Hi sudhir,
IP_A.log with debug logs enable,
2015/07/02 19:43:40 VCS DBG_FFDC Generating FFDC for resource (ODSDBU1_IP) as monitor entry point reported OFFLINE after online operation
==============================================
2015/07/02 19:43:...
