About Ryan_VDW

Ryan_VDW · 04-18-2012

Hello We are configuring a pair of NetBackup 5200 appliances as a Master Server / Media Server pair. They share an LTO5 tape library. In the Appliance documentation (page 73) it mentions that the NetBackup appliance supports LTO drives which are capa...

Ryan_VDW · 06-10-2010

Hi there I have recently been trying out the NetBackup Agent for Enterprise Vault. My initial backup of EV was successful. This was a full backup which used the EV_SITE directive. However as the EV site was very large (>2TB) I didn't want to run a ...

Ryan_VDW · 04-30-2010

Hi all One of our customers is performing a tape refresh (migrating data from LTO to LTO4). This is being performed from the command line using the bpduplicate command. The problem she is having is that after 2 hours the duplication fails with an e...

Ryan_VDW · 03-01-2010

Hi All I have a test system with Netbackup 6.5.4 and Puredisk 6.6.0.2 The Puredisk Content Router has a 2.3TB partition mounted as /Storage/data and df -h reports that 258GB of this is currently available. From the Puredisk Web GUI - the capacity ...

Ryan_VDW · 01-27-2010

Hi there I am setting up a Puredisk Trial for a potential new customer. The requires that we install Puredisk into a VM on a server running ESX4i. I know that running Puredisk 6.5.x was supported running on an ESX VM, and on our Symantec training c...

Ryan_VDW · 04-18-2012

Hi Jeff Thanks for the quick response. The appliances do not appear to have any options in the menu system to access the encryption setup. I want to find out if one is is supposed to go into the support linux shell in order to carry out the standard...

Ryan_VDW · 04-30-2010

The term "full-tape uses" is at best misleading in my opinion. The chances are that the first tracks are going to be written to far more often than the last tracks. You just don't fill up every tape each time you use it. Also, this is only for writes...

Ryan_VDW · 03-02-2010

If Netbackup was using 10% for the deduplication database would this not be part of the used space as reported from the linux console of the PureDisk Content Router when using "df -h". What I don't understand is that NetBackup is reporting a used spa...

Ryan_VDW · 01-26-2010

Does anyone know where the hostname list is stored on Linux?

Ryan_VDW · 03-30-2009

Does the MPF value apply to the whole pool, or just to those tapes which are currently in a robot/drive?

VOX

User Statistics

User Activity

Tape encryption on NetBackup 5200 appliances

NetBackup Error 71 when backing up certain Enterprise Vault directives

Tape to tape duplication fails after 2 to 3 hours with error 150 and 191

PDDO diskpool space free discrepancy

Install Puredisk 6.6 inside VM on ESX4i

Hi Jeff Thanks for the quick

Full tape uses versus partial tape uses

If Netbackup was using 10%

Does anyone know where the

Does the MPF value apply to