About iclcz01

iclcz01 · 02-07-2014

Hello, last week i added 2 drives to SL8500 library. I reconfigured sg drivers on all media servers and all works properly, only one of the media servers is unable to use drives in another library SL500. The error message is: Error nbjm (pid=1054) NB...

iclcz01 · 02-07-2014

Hello, I have a problem with storage unit groups in NetBackup 7.5.0.6 on Solaris 10. Some policy configured with storage unit, multiplexing=4, max. jobs=unlimited uses one drive. The same policy configured with failover storage unit group uses 4 driv...

iclcz01 · 02-03-2014

Hello, I have a problem with configuring FT mediaserver. It is SUN T3 server with Solaris 10 update 11, NetBackup 7.5.0.6 and 4x QLA2560. Two of them are for storage connection and two are for SAN client connection. I switched the two HBAs to targe...

iclcz01 · 09-17-2013

Hello, last year we had problems with SAN media server on RedHat 5. Version of NetBackup was 6.5.4, library SL8500, ACSLS version 7. The problem happened if there was a failed tape in the library, which caused disconnecting of SAN storage and syste...

iclcz01 · 08-23-2012

Hi, how could I calculate the volume of backups for ordering of capacity based license? Are the Deployment analysis tool in OpsCenter or nbdeployutil command the right tools? How does Symantec determine the right value when a customer wants to buy th...

iclcz01 · 03-04-2014

The problem is solved with help of Symantec Support. The drives were not available because there were DOWN. I did not know it, because NB console showed them as UP, as well as vmoprcmd -d or tpconfig -l. Only command vmoprcmd without parameters tells...

iclcz01 · 02-17-2014

Thank you, I will try to log a call.

iclcz01 · 02-17-2014

I tried such policy with the same error. Here is output of vmdareq: Drive000 - AVAILABLE master SCAN_HOST UP mediaserv1 UP mediaserv2 UP mediaserv3 UP mediaserver UP mediaserv4 UP mediaserv5 UP mediaser...

iclcz01 · 02-17-2014

I checked nbrbutil -dump before. Now I tried nbrbutil -resetall, but the problem persist.

iclcz01 · 02-14-2014

Thank you, I applied this fix before writing to this forum. The daemons are running but HBA is not visible after marking to target mode.

VOX

User Statistics

User Activity

Status code 2001 No drives are available for this job

Multiplexing does not work with storage unit group

FT media server configuration problem

Problem on Linux SAN media server

Capacity based licensing

The problem is solved with

Thank you, I will try to log

I tried such policy with the

I checked nbrbutil -dump

Thank you, I applied this fix