I need to create a veritas dg under solaris called dg_vx1 with 10 equal disk named dg_vx1_00 to dg_vx1_09.
At the moment the status of the disks are unlabeled. How could I setup this configuration with the vx commands?
At last I got the veritas-device-list-update succesfully with the command "vxdisk scandisks" it takes about 10 minutes.
I solved the next setup steps without any problems.
Thanks for your help to all.
Ok, the vxdisk -e list c3t5006016D3CE00BB6d196 is empty!
the only result with the d196 in his WWN is the following:
vxdisk -e list | grep c3t500601643CE00BB6d196s2
c3t500601643CE00BB6d196s2 auto - - error c3t500...
Hi folk,
I have detected a new problem while start to initialize the first disk, what should I do to fix this problem?
# /etc/vx/bin/vxdisksetup -i c3t5006016D3CE00BB6d196 format=sliced
prtvtoc: /dev/vx/rdmp/c3t5006016D3CE00BB6d196s2: No such file ...
OK next step after have had labeled all the needed LUNs I will start to initialise all the disks with "xvdisksetup -i cXtXdX format=sliced"
after that had been done vxdisk should list up also the latest initiliased 10 disks.
The last step would be ...