About Guy_Scharf

Guy_Scharf · 11-19-2011

We have a Dell T410 server running Windows Server 2008 R2 with SSR 2011 installed. The server has a Dell PERC H200 Adapter and the C: drive consists of two SATA drives in a RAID 1 array. I created a custom system recovery disk, accepted the drivers ...

Guy_Scharf · 10-25-2011

I'm looking at the SSR 2011 sample script CreateIncrementalImage.vbs as a possible model to help manage laptop backups. The script identifies the job to be run by using a job id. Where do I find the job id for a backup job that I have created? Is t...

Guy_Scharf · 10-17-2011

I'd appreciate recommendations on the best way to manage backups of laptops. For our workstations--which are always connected--I have set SSR to make incremental backups at specific times and full backups on other specific times and dates. The backu...

Guy_Scharf · 10-09-2011

I have the SRD from SSR 2011 SP1. I boot a Dell Optiplex 790 (with i5-2400 processor and 4GB RAM) from that CD. The "push any key to boot from CD" message appears and, after pushing a key, the "loading windows" progress bar. As soon as the progres...

Guy_Scharf · 10-08-2011

A hard drive failed in a Windows XP workstation (attached to a domain running SBS 2003). So I installed a new hard drive and used the SRD to restore the drive from recent backup made with SSR 2011. In the restore process, I did not restore the disk...

Guy_Scharf · 11-25-2011

Tried testing again today. I could not get any SRD I have to work on the server. All would show the slow "loading windows" display. After that, the black screen would flicker different shades of black once or twice. A few would show the fairly fa...

Guy_Scharf · 11-23-2011

I created a custom SRD with the Windows 2003 driver. When I booted the SRD, Windows loaded but the SRD window never appeared. This appears to be the same problem I had on Dell Optiplex 790 workstations with 4GB RAM, where the solution was to use th...

Guy_Scharf · 11-22-2011

I tried booting from the stock multi-lingual SRD this morning. When I tried to load the Windows "2008 x86 32-bit" driver, the SRD refused to load it claimiing it was a 64-bit driver. I did try loading Dell's Windows 2003 32-bit driver and that did l...

Guy_Scharf · 11-21-2011

I thought I posted a response, but not it's not here? Anyway, here goes again. I downloaded a driver for the Dell H200 that was identified as a 32-bit driver for Windows 2008 x86. The driver is here and the documentation says it is a 32-bit x86 dri...

Guy_Scharf · 11-20-2011

I found a comment that said that SSR requires Vista drivers for the SRD. Is that correct? The only 32-bit driver I was able to find for the Dell H200 is a Windows 2003 driver. Is that likely to work?

VOX

User Statistics

User Activity

Which driver to see C: drive on restore of Dell T410 with PERC H200?

Where do I find JobID?

Best practices for laptop backup?

SRD does not load

Restoring a workstation with SSR 2011

Tried testing again today. I

I created a custom SRD with

I tried booting from the

I thought I posted a

I found a comment that said