Hi Team,
Library is = STK Library
Netbackup Version: 7.1.0.4
2 tape drives has been replaced , but how can i proceed and config it at NBU level.
I am not able to see serial numbers at acsls level.
ACSSA> display drive * -f type serial_num
2014-...
Hi Team,
Master Server is AIX and NBU Is 7.1.0.4
Media server is AIX and NBU is 7.1.0.1
Client is AIX and NBU is 6.5
Backup is failing with error code 21.
Detailed Logs:
06/25/2014 21:16:22 - Info bpbrm (pid=6750288) chidrxga01dm is t...
Hi Team
Master Server: AIX, NBU Version: 7.1.0.4
Media Server: AIX, NBU Version: 7.1.0.1
Client: Windows Server 2003, NBU Version 7.1.0.1
Backup is going through Media server only.
Differential backup completed successfully but full backup fr...
Hi All,
There are 300 clients configurd in one of my environment. Is there any method to check which client backup is going to tape and which client backup is going to Disk in single shot by command line or GUI.
But the concern is , on media server output of tpautoconf -report_disc does not give me any "NEW DEVICE", it is only showing "Missing Device (Drive) ".
In this case how i come to know the new serial no and drive path.
Hi mph,
i did it on master server but got below output
bash-3.00$ sudo ./tpautoconf -replace_drive Silo2-Shared9 -path /dev/rmt20.1
Found a matching device in global DB, Silo2-Shared9 on host sctclbk
and i am not able to see NEW DEVICE in tpau...
Hi Yogesh,
Backup completed after changes as you suggested.
Can you please elaborate what does it means??
Ports = Non-reserved ports
Daemon connection port = Daemon port only
Hi ,
Disable Chimney setting but it failed again with error code 40.
06/25/2014 00:24:09 - Info nbjm (pid=5701736) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=4151814, request id:{EC7C39C4-FBD0-11E3-BB15-584E5E7D0000}...