About DaranDazza

DaranDazza · 08-09-2015

I have found that when ITDT is used to write test a tape in a Tape Drive that backup Exec cannot then write to that tape unless I have BE10 do a quick erase. This discovery came about after some of our remote sites complained that certain tapes woul...

DaranDazza · 01-28-2015

I have a server Win2008 (DC) on which has been installed a Virtual Server - backing up we get error message: V-79-57344-6508413.0.5204eng-ntfs-backupV-79-57344-65084ENRetail - Before you can back up this resource (\\Servername.xxx.yy.uuu.vv\D:), you...

DaranDazza · 02-02-2014

Changed tape Device from an IBM Ultrium LTO5 to an IBM Ultrium LTO6 Deliberately backing up the previous exact same Data (as a test) Backup takes 4 hours Verify takes 11 hours Driver provider - Symantec Corporation 12/02/2008 Version 5.1.37.0 Would ...

DaranDazza · 01-19-2014

Error message JV2WWX1 was sighted on the actual IBM Ultrium Tape Device (Server 2008 R2 with BackupExec R3) I could not find out any info on this error but it appears to refer to the fact that the Tape Device needed cleaning. Put a cleaning tape thro...

DaranDazza · 11-05-2013

I received this message on one of the 2000+ servers that I remote into. "VSS Snapshot warning. File c:\program files (x86)\common files\symantec shared\eengine\eectrl64.sys is not present on the snapshot." Now normally, I get around this by just cr...

DaranDazza · 08-12-2015

Reply to VJWare - placing Tapes into the Scatch Media does not help. Reply to PKH - The tapes are already set via OPP to be overwritable before the start of the job - Our jobs do specify Overwrite (everytime). Reply to Colin Weaver - I believe that...

DaranDazza · 04-15-2015

We are still having this rather weird problem - changing to a faster slot did decrease our time fractionally but overall the problem appears to be that Backup Exec is not programmed to utilise the features of LTO6 - it recognises the fact that there ...

DaranDazza · 01-28-2015

Just to add additional comment - The backup of the DC is OK - the message refers to the Virtual Server

DaranDazza · 01-28-2015

We have found that the LTO6 cards were installed in a slow slot on the Motherboard - changing over to a faster slot has increased the speed of the backup lessening time taken.

DaranDazza · 11-25-2014

I am also having the same problem with every LTO6 Tape drive - We operate out of a centralised Support Help Desk and we service 1300 locations (remotely) - 2 or more servers per site.... running BE2010 R3 on Win2008 R2 servers. These sites are upgra...

VOX

User Statistics

User Activity

Backup Exec 2010 fails overwrite after ITDT write/test to tape

Virtual Server not backing up

Verify takes 11 hours - BackupExec 2010 R3

error message JV2WWX1

eengine is not present or hidden

Reply to VJWare - placing

We are still having this

Just to add additional

We have found that the LTO6

I am also having the same