About cmorrall

cmorrall · 06-20-2017

I've recently been tasked with implementing granual recovery capabilites in NetBackup.So far I admit I've only skimmed the bits in the documentation, but I've gathered I need to install the Microsoft provided NFS client on the AD Domain Controllers. ...

cmorrall · 12-01-2014

I am currently trying to get an up to date report on the capacity usage, I may have to initiate a purchase of additional licenses. I figured out that I can use the nbdeployutil tool to generate the report. I have created an NetBackup CLI user and gen...

cmorrall · 11-27-2014

I am currently integrating a NetBackup Appliance 5220, and I am now detailing the SAN configuration. The intended use is to zone the the NBU appliance to the same LUNs as the ESX hosts and thus leveraging the SAN transport mode to pull the backups ov...

cmorrall · 06-13-2013

Acting on instructions from support, I'm attempting to run /opt/NBUAppliance/scripts/DataCollect.sh This fails with the following error: ================================ERROR============================================= MegaRAID_CLI Symlink doe...

cmorrall · 05-17-2013

Related to my previous post, I'm having some problems with my install of a NetBackup 5220 appliance. This appliance is a new master and media server, I have no other media servers in the topology. My intention is to use eth1 for management, and a bon...

cmorrall · 12-12-2017

I turned on verbose logging on the client and was able to track down the issue.Apparently, NetBackup uses the short hostname, not the FQDN for the NFS mount operation. When I earlier verified connectivity using the manual method, I used the FQDN.Not ...

cmorrall · 12-11-2017

Resurrecting this thread, not until now did I get around to configure this.Still facing some issues. I think I've followed all steps outlined in the manual, but I get this error:2017-dec-11 11:38:15 - Info bptm (pid=243912) start backup2017-dec-11 11...

cmorrall · 12-10-2014

What is the underlying storage and I assume SAN infrastructure? Perhaps you have the possibility of presenting the storage LUNs as read-only to the backup host.

cmorrall · 12-10-2014

Just to make sure I wasn't overstepping any boundaries, I worked with Technical support to get the procedure documented. Indeed they remoted in and went through the process of using 'elevate' and then chmod to grant read access to the finished report...

cmorrall · 12-01-2014

I was successful in generating the report in the "incoming patches" share, I can see the excel file and I can almost taste it but no. "Access denied" when I try to open it or copy it in Windows.

VOX

User Statistics

User Activity

Active Directory Granular restore and a NetBackup appliance

NBU Appliance 5220, 2.6.0.3. How to get the nbdeployutil report

NBU Appliance 5220, Tape out, VMware integration, SAN transport mode, read-only LUNs, port usage

Running DataCollect.sh fails with MegaRAID

5220 appliance, multiple networks, problem with media server name.

Re: Active Directory Granular restore and a NetBackup appliance

Re: Active Directory Granular restore and a NetBackup appliance

What is the underlying

Just to make sure I wasn't

I was successful in