Hi Experts,
I am planning an NBU upgrade from 7.5.0.6 to 7.6.0.3 on Solaris 10 master server. All the Unix clients are solaris 10 based machines (around 70 clients).
I need to know the different ways to do the client upgrade from the master serv...
Hi Experts,
Recenlty twice our /opt (total capacity = 101GB) space filled up with 100% and the backups failed after NBU services went down.
Logs verbose = 0
However noticed that in /opt/openv/netbackup/db/images/ 2 clients size was huge
server...
Hi Experts,
I have a media server to which a HP auto loader is connected. It was working fine, but from past 2 days the robot initialization is failing.
From the device manager of Media server both the changer and drive is visible.
When i run s...
Hi Experts,
My weekly backups failed due to no media available. But when i checked today there was media in respective volume pools. These tapes has no Time assigned listed in media console and i need to know when these tapes were inserted into the...
Hi Experts,
Backups are getting failed to the Storage Appliance if it is gets down. So need to plan the alternate solution/automation of manual steps to avoid the manual change of storage unit in the policy. And delay in firing the Backups.
Hi Ram,
I had not faced any issues while upgrading earlier. But i had done just the patch upgrade from 7.5 to 7.5.0.6. Hence i just wanted to confirm if we can do it from 7.5.0.6 to 7.6.0.3.
Yes i will make sure there is enough space in said loca...
Hi Symterry,
Thanks for the reply.
For rsh install i believe we need to have the client name entry and a + in .rhosts file.
However when doing the push install from the GUI > all policies > am unable to do multiple clients at once or i may be d...
Hi Ram,
Thank you for the reply.
I have the below in mentioned dir.
bash-3.2# cd /usr/openv/netbackup/client/Solaris/Solaris10
bash-3.2# ls
client_bin.tar.gz extract_java installpbx NB-Java.tar.gz pddeagent.tar.gz ssh_to_cli...
The Media changer was un-installed and installed from Device manager followed by the reboot of the device host. It worked fine. Thanks Marianne and all for inputs. :) cheers!!!
