Hi Experts,
Environment:
Master and Media servers running on Linux, NBU version 7.6.0.2.
Tape Libraries: StorageTek SL3000, Firmware 3.61
We recently replaced LTO4 Tape Drives with LTO6 Tape Drives on our 2 STK SL3000 Tape libraries. The upgrade ...
Hello Everyone,
Does any one know a step by step procedure for replacing the Tape drives.
Current configs:
2 sites with SL3000 Tape Libraries controlled by seperate media servers on each site.
Each side has 16 Fiber attached LTO4 tape drives.
...
Hi Everyone,
We are replacing the hardware of a current NBU 7.6.0.2 Media server running on Linux. The current server is the robot control host of SL3000 library and also has 16 drives configured on it.
I found an old article (link below) for re...
Hi,
I am looking for a step by step guide to setup a DR master in a non clustered environment to a Remote site for an existing Master running 7.5.0.3 on Redhat Linux 6. I did find some documentation on how to setup a non-clustered DR master but i...
Symantec has finally resolved the issue. The device mapping file was not renamed properly when it was replaced last time. Renaming the file fixed the issue.
Hi Marianne,
We recreated the devices on media server but the issue is still there.
Here is the Scan output.
tpcommand]# /usr/openv/volmgr/bin/scan
************************************************************
*********************** SD...
Hi Marianne,
I tried to paste the output here but web site won't take it, so attached a text file for scan outputs for both robot control hosts.
regards,
Amir
Hi Marianne,
Below are the output of Scan for both media servers.
[root@ls16722p ajaffr99]# /usr/openv/volmgr/bin/scan
************************************************************
*********************** SDT_TAPE ************************...