Showing results for 
Search instead for 
Did you mean: 
Level 4
since ‎10-31-2006

User Statistics

  • 20 Posts
  • 0 Solutions
  • 0 Kudos given
  • 0 Kudos received

User Activity

I am being tasked with creating a report to be e-mailed daily that contains all the information that is listed in the Acitivity Monitor plus the backup selections information for each job.  I am running Netbackup 6 MP4 as my master/media server on Wi...
I am going to start off by saying I am new to Netbackup 6 MP4. I have a 48 tape HP MSL4048 library and just changed all 48 tapes with new tapes. All are Ultrium 3 tapes with premade barcodes that are one letter (M, W, or D) 5 numbers, and one Lette...
During any backup job/policy that I have configured I notice that both of the drives in my tape library are going "down" at least once every half hour and stay that way until an operator goes into Device Monitor to "up" the drive. This is queuing up...
I have looked all over the Veritas/Symantec website and used multiple search engines. The Backup Exec server sees the library via Device Manager, but is installed with the HP driver. Backup Exec 10 sees the 2 tape drives installed in the library wi...
I have a policy setup that was running correctly up until this weekend for a Full (Weekly) backup job. Below is the error reports from the activity logs. Any help will be greatly appreciated.12/26/2006 9:53:35 AM - requesting resource snbp01-hcart3...