I tried to convert an SSR offline backup on a USB device to a VMware ESXi 6.5 (free edition) but cannot authenticate to the ESXi (invalid user or password), wether with root nor with a new created user. SSH ist working (Putty, WinSCP). Same with Syst...
Liveupdate updates recent BESR 8.5.3 (SP3) via Liveupdate on x86 machines but does not find anything on x64 machines. Same behavior on different machines was also true on BESR 8.5 SP2. Seems to be a general problem on x64 architectire.
Regards
Marti...
Hi, after upgrading from Windows 2000 SP4 to Windows Server 2003 (SP1/SP2) the Replication Exec Agent Service 3.1 dows not start anymore because the underlaying driver VsrFsFlt.sys failes to start.In Device Manager the driver VsrFsFlt is listed with ...
Hi,BE10d had a "Media Protection" section in the Job Configuration where Media could be protected with a password (Password protect media).Where is this configuration in BE 11d now?After an upgrade from 10d to 11d the media protection is still active...
Hi DidiDave,
I also did not run into problems upgrading from W8.1 to W10.
SSR 2013 R2 SP2 worked fine after the upgrade.
The problem startet after I applied SSR 2013 R2 SP3 to the working SP2 version.
I restored a backup (boot from USB with SSR) ...
Hi Weff,
Thank you for the response.
I can reproduce this problem by just installing either SSR 2013 R2 SP3 over the working SSR 2013 R2 SP2 (11.1.2) version or by installing the full SSR 2013 R2 SP3 version. I did however not try to first uninstal...
Hi,
after I installed Service Pack 3 onto SSR 2013 R2 (11.1.2) I ended up with INACCESSIBLE_BOOT_DEVICE on WIN10. WIN10 was upgraded from Windows 8.1 where I had SSR 2013R2 11.1.2 installed.
The WIN10 error did not recover and I had to restore the ...
