15

1415 Topics

Expired backup sets not deleted
Anybody solved that problem with Expired backup sets? I can see them expired, Allow Backup Exec to delete all expired backup sets is enabled, but BE does not delete them even when there is no disk space on storage. I saw some other posts but are few month old... Besides with no solution
Solved
pepe_lopez
9 years ago Place Backup Exec
34KViews
1like
10Comments
V-79-57344-41488 this backup cannot be used for conversion
Hi I am getting this error on Backup Exec 15 only on the System State Job: V-79-57344-41488 - Due to one or more errors in \\SERVERNAME.misc.local\System?State, this backup cannot be used for conversion to virtual machines, Simplified Disaster Recovery (SDR), or a complete online restore. V-79-57344-33928 - Access Denied. Cannot backup directory \ and its subdirectories. Only System State is selected on the selection list There is a Full and Incremental AOFOis switched on Does anyone have any ideas?
FettBobba
10 years ago Place Backup Exec
18KViews
0likes
16Comments
Problem with Backup Exec 15 "the backup exec database was offline"
Hello everyone, I installed Backup Exec15 in a Windows Server 2008R2, the preinstallation and the installation was Ok, it was executed with no problem, but when i tried to run Exec15, it requests the username and password, Iuse the local administrator account and thenit displays a Message error "the backup exec database was offline" and the application cannot be executed. I enter to the SQL Studio, and tried to restart the Database but it displays another error message in where the SQL$BACKUPEXEC service cannot be started. Please can you help me with this? Thanky you in advance. Greetings!
JLemus
10 years ago Place Backup Exec
18KViews
0likes
21Comments
Backup exec 15 stuck on Discovering resources
Hello, I have a problem that 2 servers can't backup, Status "discovering resources" and the job does not do anything. I can't cancel it or hold it, looks like backup exec is stuck. I can't stop or restart services.WhenI stop "Job engine" process, servicealso stops and then I can restart all services, jobs restarts and same issue persists. I tried repair installation from program and features, repair database with BEUtility, restart whole server nothing helped. Day before everything was fine and day after it got stuck. Very strange. Backup exec is installed onVMWareVspherevirtual machine, Windows Server 2008 R2 Backing up Windows Server 2008 R2 Any suggestions?
BurkaBurka
10 years ago Place Backup Exec
14KViews
1like
29Comments
BackupExec 15 Database was offline.
Hi all, Current, I cannot connect with BackupExec 15 console on Windows Server 2012 domain controller. When I open BackupExec 15, It have some error. "The BackupExec Management Service was unable to start The BackupExec database was offline. Please bring the database online and restart the BackupExec services. Everyone, Please help me fix this case? Thanks,
quanpl
9 years ago Place Backup Exec
13KViews
0likes
21Comments
Event 1023 Windows cannot load the extensible counter DLL Backup Exec.
I am getting the following events from our newly build server 2012 r2 server with BE 15. I am not sure what is causing this issue, but it appears to be related to BE and performance counters. Log Name: Application Source: Microsoft-Windows-Perflib Date: 4/24/2015 11:02:17 AM Event ID: 1008 Task Category: None Level: Error Keywords: Classic User: N/A Computer: XXXXXXX Description: The Open Procedure for service "BITS" in DLL "C:\Windows\System32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Perflib" Guid="{13B197BD-7CEE-4B4E-8DD0-59314CE374CE}" EventSourceName="Perflib" /> <EventID Qualifiers="49152">1008</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-04-24T18:02:17.000000000Z" /> <EventRecordID>3405</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>XXXXXXX</Computer> <Security /> </System> <UserData> <EventXML xmlns="Perflib"> <param1>BITS</param1> <param2>C:\Windows\System32\bitsperf.dll</param2> <binaryDataSize>4</binaryDataSize> <binaryData>02000000</binaryData> </EventXML> </UserData> </Event> Log Name: Application Source: Microsoft-Windows-Perflib Date: 4/24/2015 10:53:43 AM Event ID: 1023 Task Category: None Level: Error Keywords: Classic User: N/A Computer: XXXXX Description: Windows cannot load the extensible counter DLL Backup Exec. The first four bytes (DWORD) of the Data section contains the Windows error code. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Perflib" Guid="{13B197BD-7CEE-4B4E-8DD0-59314CE374CE}" EventSourceName="Perflib" /> <EventID Qualifiers="49152">1023</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-04-24T17:53:43.000000000Z" /> <EventRecordID>3403</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>Application</Channel> <Computer>XXXXXX</Computer> <Security /> </System> <UserData> <EventXML xmlns="Perflib"> <param1>Backup Exec</param1> <binaryDataSize>4</binaryDataSize> <binaryData>7E000000</binaryData> </EventXML> </UserData> </Event>
Vdang
10 years ago Place Backup Exec
12KViews
0likes
4Comments
Backup Exec 15 firewall ports requirements
Hi, our customer's BE server is BE 15 on Windows Server 2008 R2 SP1 Std. All the clients are Windows clients (Windows Server 2008 R2 SP1 or Windows 7 Pro). Some of the clients are in different subnets than the BEserver. Between those clients and the BE server, there are physcial firewalls. We have opened ports in the firewalls based on our past experiences with BE 2014. However, we found the backup jobs of these clients failed. We did sometroubleshooting andfound the BE server seems use some random ports (from 5xxxx to 6xxxx) to communicate with the clients.As these ports are not open, the backup jobsfailed. My questions are: 1) What are the required firewall ports to open on the phsycial firewall for BE 15? Bi-directionly or one direction? 2) Is there a way in BE to limitthe BE server to communicate to the client via specific ports? Thanks in advance.
Solved
liuyang
10 years ago Place Backup Exec
12KViews
1like
3Comments
odbc access error backup
Hello friends, my server continuously gives the following error: Try removing the catalogs folder and recreate followed by restart services and recatalog, it works, but the next day I again throw the same error. Can somebody help me? Thank you so much!
Solved
roman_rsr
9 years ago Place Backup Exec
12KViews
1like
4Comments
Backup Exec 15 Performance Slow
Hi, we're another struggler w/ Backup Exec's performance. Brand new fresh install of Windows 2012 R2, Backup Exec 15, Dell PowerEdge R430, internal RAID5 (or 6 I don't recall what the Perc on it had available), dual port SAS 6Gbps card to Dell TL2100 w/ two drives, (4) 1G NIC's LACP'ed to one team - and we tried just one single un-teamed NIC by itself, all current firmwares, Windows and BE updates/patches, trying to backup VMware 6.0u1 in the same rack; VMware environment is Dell M1000 blade stack w/ EQL 6110's, all 10Gb in blade stack and storage infrastructure, connected at 10Gb uplink to 1Gb Cisco 3750 switches, the 1Gb to our BE server. Jumbo frames enabled throughout entire infrastructure. Same as other folks who have this issue, we can single-stream file copy at full 1Gbps, or multi-stream file copy up to nearly 4Gbps of our team. We've also tried stripping out LACP team entirely, just one single NIC connected at all, same thing, can easily drive up full 1Gbps throughput at the OS level file copy (either drag-drop in Windows or use mutliple instances of robocopy). Backup Exec will only pull data at ~300-500Mbps no matter what either B2D or B2T using VMware agent backing up VMDK (not Windows agent). That's watching network utilization of 300-500Mbps, and BE job rate of 2.5-3.5GBpm which seems to jive. Our argument is the same as others, network speed is proven to be good since we can move files at speed so BE should be able to do the same. Everything runs very fast except BE. Trouble shooting steps taken: -Repair, despite it being a fresh install; no change -Local disk defrag, despite being fresh install and OS reporting 0% fragmentation - also wouldn't seem to matter when B2T runs same slow speed; no change -Trend Micro excluding install and BEData folder, unloaded; no change -NIC tuning, including enabling/disabling flow control, confirmed 1Gbps full-duplex on each NIC, as mentioned can push up full bandwidth w/ file copies, enabling/disabling off-loading, NIC buffers, flow control on switch; no change -File size and buffer tuning from w/in BE; no change -Registry hack buffer tuning via article #85311; no change -Numerous reboots, including reboot every trouble shooting attempt listed above; no change -Wireshark ran while running backups; no trouble found, good clean network connectivity, jumbo frames confirmed, good window size, etc. Backing up a couple of small 20GB VM's runs at about 2.5GBpm/300Mbps average. Backing up single 460GB VM runs at about 3.5GBpm/500Mbps average. Even the large VM at the faster speed is unusable if we have 13.7TB worth of critical data - 30TB overall data, that needs to be backed up in a 29 hour window (calculated 90-95 hours for 13.7TB!!). Please double-check my math just in case. Opened support case #20190763; overseas technician indicated our speed was "already better than average" or "better than most people get." Did include notes for above registy hack buffer tuning as well as article #90966, disabling buffer reads. I'll try this next. Searching this forum, I did find several similar issues but the threads were closed w/o resolution. I don't know why. I also found similar posts on other forums of our same issue w/ no resolution. We've engaged our VAR about the backup system they've sold us. Does anyone here have any ideas please?
Solved
rreed2
10 years ago Place Backup Exec
11KViews
1like
9Comments
Snapshots not remove after backup on Hyper-v server
Hello, I'm using the latest version of Backup Exce V-RAY edt for Hyper-V (Windows 2012): Backup exec 15 Feature Pack 3. I performedVirtual-Based backup like recommanded. Once done, in the Hyper-v console, i see for ALL VM that snapshots are presents. These snapshots cannot be remove with Hyper-v console. There is no option to manage the snapshot. I found a way to remove them via powershell. But, each time a backup is performed, snapshots aren't deleted/merged. My question is: is-it normal that Backup exec doesn't remove the snapshot used for the backup when we use Virtual-based backup ? This snapshots are time and space consuming .... Thanks Eric
Solved
Eric_M1
9 years ago Place Backup Exec
9.5KViews
0likes
2Comments