Granular backups for Exchange failing
Granular backups used to work just fine. Now for the last few months it appears that they are not working correctly anymore. The detailed status on the backup jobs show the following warning: "Warning bpbrm (pid=5296) from client DAG01: WRN - unable to setup NBFSD credentials, disabling granular backups". The job completes, but with a status of '1' and obviously granular restores are not available when trying to restore using that backup job. I have searched and searched and the only things I am finding on the internet relate to setting up NFS. I have verified that NFS is setup correctly. So this is not the issue. Any ideas about what the likely cause may be? Netbackup 7.5 Exchange 2010 running on windows 2008 r2 ....using a DAG.Solved4.1KViews1like5CommentsExchange Backup Fails: 0xe00002f7 / V-79-57344-759 / VFF Open Failure
Hello, we are using Backup Exec 2010 R3 SP4 (Ver 13.0 Rev. 5204 (64Bit)) on Windows Server 2008 R2. This Server is doing a Backup of an Exchange 2010 Server running on another Windows Server 2008 R2 via Remote Agent for Windows Servers. The backup is running two times a day: In the middle of the day to disk. In the night to tape. The Backup was running fine for several years. Since 3 weeks the backup to tape fails, while the backup to disk still works fine. Nothing was changed. The error is (translated): _______________________________________________________________________ Completed status: Failed Final error: 0xe00002f7 - Cannot extract mailbox messages from the Exchange backup. Review the job log for more information. Final error category: Resource Errors For additional information regarding this error refer to link V-79-57344-759 _______________________________________________________________________ and: _______________________________________________________________________ Backup- \\"servername"\Microsoft Information Store\PRIVDB02 V-79-57344-759 - Unable to complete the operation for the following reason: VFF Open Failure. This can be caused by low memory or disk resources. _______________________________________________________________________ What we have already tried: -Restart Server -Update Backup Exec to newest Version -Install Hotfix TECH164659 -Solutions from this articles: http://www.symantec.com/business/support/index?page=content&id=TECH128187 http://www.symantec.com/connect/forums/0xe00002f7-cannot-extract-mailbox-messages-exchange-backup-0 -deleting an recreating the backup-job -delting and reinstalling the remote agent -deleting Files on Exchange Server to get more free disk space -defining max cache size for Exchange Information Store to get more free RAM -Installing all Windows an Exchange Updates (Exchange 2010 SP3 Update Rollup 7) Nothing of the above did help, we are still getting the same error on backup to Tape while Backup to Disk runs fine. Can anyone help? Thanks Error in original language: _______________________________________________________________ Sichern- \\"servername"\Microsoft Information Store\PRIVDB02 V-79-57344-759 - Der Vorgang für die ausgewählte Ressource unter Verwendung der angegebenen Optionen konnte aus folgendem Grund nicht beendet werden: Fehler beim Öffnen des VFF. Dies kann durch zu geringen Arbeits- oder Festplattenspeicher verursacht werden. Auftrag beendet am Donnerstag, 25. September 2014 um 04:59:04 Abschlussstatus: Fehlgeschlagen Endgültiger Fehler: 0xe00002f7 - Ein Extrahieren der Mailbox-Nachrichten aus dem Exchange-Backup ist nicht möglich. Im Auftragsprotokoll finden Sie zusätzliche Informationen. Endgültige Fehlerkategorie: Ressourcenfehler Zusätzliche Informationen zu diesem Fehler finden Sie unter der Verknüpfung V-79-57344-759 _______________________________________________________________Solved9.7KViews2likes10CommentsExchange 2013 backup fails with Backup Exec 2014
For the past week I've been having failures with my backup of Exchange. I get the errors: V-79-57344-34070 - Snapshot Technology: Initialization failure on: "Microsoft Information Store". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS). Snapshot technology error (0xE0008516): The database specified for the snapshot was not backed up because the database was not mounted. All databases are mounted. The VSS list writes are all stable. Not sure what to do again. Any suggestions?Solved13KViews1like10CommentsIncremental backup of exchange logs windows errors
Well the title says it all; We are running Full/Incremental backups (BE 2015) on our Exchange 2007 stores. BE reports that full and incremental backups are succesfull however on the Exchange server we are getting Event Error 206 (ESE) : Log Name: Application Source: ESE Description: MSExchangeIS (7244) First Storage Group: Database D:\ExchangeDB\Mailbox Database.edb cannot be incrementally backed-up. You must first perform a full backup before performing an incremental backup. Which is immediately followed by error 57920 (Backup Exec): An error occured while preparing Microsoft Exchange Server \\EXCHANGE\First Storage Group to back up database. Error code 0xC8000230 Error message: The database missed a previous full backup before the incremental backup. What gives here? BE 2015 shows everything to be in order. I have tried removing the exchange logs, tried deleting and recreating the jobs, run full backups then new incrementals 9 ways to sunday with no change at all. Any advice would be greatly appreciated! Andy2.5KViews0likes9Commentsneed help concerning GRT duplication error
Hi all, please can you help me in the below error: really I dont understand why that happend? everything was running fine and the problem happend out of sudden.. my configuration is as follow: I am having two mailbox servers (clustered); mailbox01 and mailbox02. I am having a GRT policy that I use to backup individual mailboxes. for this GRT policy I created a storage unit DAG-GRT unit that contains two staging disks each disk is mounted ( connected) to its server (i.e. disk01 is connected to mailbox01 and disk02 is for mailbox02). when i run the GRT policy,backup images are created successfully from both server to the staging disks, but duplication is always failing on mailbox02 disk; i.e. I can't relocate my mailbox02 image to tapes! meanwhile duplication is always successful for mailbox01. master server is a Solaris 10 X64 NBU master server version: 7.0.1 clients version on mailbox01 and mailbox02: 7.0.1 the error that I am getting is the follwing: 16:22:30 Duplicate started Wed Oct 12 16:22:27 2011 16:22:30 Activity monitor job id = 10146 16:22:34 INF - Destination storage unit mailbox02-hcart-robot-tld-0 on host mailbox02 16:28:11 INF - db_IMAGE() failed: database system error (220) 16:28:11 INF - Status = no images were successfully processed. 16:28:11 INF - Duplicating policy DAG-GRT-daily schedule GRT-Sched backup id dag_1318417585 copy 1 created on 10/12/2011 14:06:25 on source path P:\netbackup-mail02-grt 16:28:11 INF - Duplicate of backupid dag_1318417585 failed, database system error (220). 16:28:11 INF - Status = no images were successfully processed. appriciating your help anyone. many thanks in advanceSolved1.7KViews1like8CommentsAfter Exchange upgrade backups no longer working
Hi, I recently upgraded our Exchange Infrastructure (Database Availability Group) from Exchange Server2013 Cumulative Update 5 to Exchange Sever 2013 CU 11. I also upgraded Exchange on the Backup Server (Media Server) to Exchange Server 2013 CU11. I have restarted both members of the DAG and the Backup Exec Server but keep getting the following error when trying to backup the DAG: - "Backup- MIEXCH1.Marine.ie V-79-57344-34070 - Snapshot Technology: Initialization failure on: "Microsoft Information Store". Snapshot technology used: Microsoft Volume Shadow Copy Service (VSS). Snapshot technology error (0xE0008516): The database specified for the snapshot was not backed up because the database was not mounted. Check the Windows Event Viewer for details. " Any troubleshooting steps much appreciated. We are running Backup Exec 2014 Version 14.1 Rev 1786. Is Exchange Server 2013 CU11 supported in this version of Backup Exec? thanks,575Views1like1CommentExchange DAG location based Backup
Customer wants us to build a Exchange DAG with Nodes on two different Locations, DBs evenly distributed between both Locations. Backup should only save the passive Databases, as far as I know this requires DAG-Mode. Problem is that the Nodes in Location A have to write their Backup to Location B and vice Versa. With Node-based Exchange Backup this can be done using two Policies, easy mode. Is there a way to make this work with DAG? Thanks in Advance for your Ideas.560Views0likes1CommentStatus 2001 on a cluster server
Hi All, I am using win 2008 & 2012 servers and NBU 7.6.0.1 in a cluster server, I got the error 2001 which is nothing but NO DRIVES ARE AVAILABLE, but i have plenty of drives and all are working fine and it is a FULL backup. In my environment we are using all windows severs, No Unix Servers. Anyone please suggest me howto getrid of this issue. Thanks in Advance Pavan534Views0likes1Comment0xe000035e - Backup Exec Agent for Microsoft Exchange wurde nicht verwendet
Hello, we have a problem with Backup Exec 2014 14.1 Rev 1786. We use an Exchange 2010 on a Windows Server 2008 R2 in the VM and the Problem is, that Backup Exec don't Save the Exchange. On Saturday run a Full Backup and from Monday-Friday runs incremental. The Problem is, the Full Backup run without Problems, but the incremental abort with the Notice "Endgültiger Fehler: 0xe000035e - Backup Exec Agent for Microsoft Exchange wurde nicht verwendet, um das letzte vollständige Backup dieser Datenbank zu erstellen. Führen Sie ein vollständiges Backup mit Exchange Agent aus, bevor Sie ein Differenziell- oder inkrementelles Backup ausführen. Endgültige Fehlerkategorie: Ressourcenfehler Zusätzliche Informationen zu diesem Fehler finden Sie unter der Verknüpfung V-79-57344-862" On the Exchange the Agent is installed and was used with the Full Backup. GRT is disabled(we tested with anabled) and Advanced Open File is activ. Have some a Solution?889Views0likes2Comments