Backup Exec Infrastructure Manager

198 Topics

How to backup Backup Exec itself, and how to restore it ?
Hi - Im using Backup Exec 2010. In case of a total disaster, how do wemakes a backup of Backup Exec 2010 software itself, with all jobs, history etc? I m thinking of a scenario where my backup exec computer is lost and I need to reinstall Backup Exec and get all backup jobs/history back again? Please advice. Kind r Bjørn.
Solved
niko
7 years ago Place Backup Exec
8.9KViews
0likes
7Comments
Catalogue Operation has failed
Hi All I've spent a few hours searching and trying different methods online to try and get our Tape Cataloge process to work. We have some LTO5 Tapes that were used to backup information in Backup Exec 2010. Since these tapes were used we have upgraded to Backup Exec 2012 (service Pack 4). At first I though tthe catalogue process was failing because of this, but further investigation I can see that it is failing on tapes that have only been used in Backup Exec 2012 When trying to cataloge the tapes after an inventory the job is failing and is producing these error messages: Job ended: 04 June 2014 at 20:23:52 Completed status: Failed Final error: 0xe00084b7 - A backup set was created which contains no data. See the job log for details. Final error category: Job Errors For additional information regarding this error refer to link V-79-57344-33975# Catalog- sanapp2.progressrail.com\WHATSUP Null backupset. Possible reason: Cataloging SW Compressed ArcServe Tape. Backupexec does not support this operation In regards to the above message, we are using Compresson on Hardware using our Dell Powervault TL4000 drive. I have tried following this support article but it makes no difference:http://www.symantec.com/business/support/index?page=content&id=TECH142684 I dont have much hair but the little I do have, im slowly starting to pull out. Would appreciate it if anyone could share some information on this. Thanks Craig
Solved
cboothe
8 years ago Place Backup Exec
1.5KViews
1like
2Comments
BackupExec 2010 dropping tape drive offline
Hi, This is a new topic to re-open the issue discussed here: https://www-secure.symantec.com/connect/forums/tape-drive-goes-offline-second-backup Just to recap on the issue itself: Running BE2010 Trial on Windows Server 2008 R2 x64. Hardware is Dell R710 rack server, connected to a HP Ultrium 1760 LTO4 SAS drive via a Dell PERC 6/E SAS Adaptor card. This is what’s happening: Setup and run a backup job with full verify. I’ve tested up to a 250GB job and it completes fine the first time around. After completion of first job, rerun the same backup job (after tweaking the media overwrite/append etc settings) The job immediately fails, reporting the drive as offline – cannot bring drive back online using BackupExec administrator Close BackupExec administrator, restart BackupExec Device/Media service (which also restarts associated service dependencies). Re-open BackupExec administrator - drive appears to be online again, ready for another job to be kicked off. I’ve completely replaced: Numerous LTO tapes The Dell SAS adaptor that connects the Dell server to the HP rack chassis The HP Rack chassis that houses the 1U internal HP LTO4 Ultrium 1760 SAS drive, SAS adaptor board and all The internal HP LTO Ultrium 1760 drive itself We’ve verified that all above component drivers and firmware are fully up to date. This problem occurs with both Symantec Tape Drive drivers and HP's official LTO4 tape drivers, To me, the following facts suggest that the problem lies with BackupExec itself: After the drive goes offline, a simple restart of the BackupExec services seems to bring it back online again If the drive goes offline, and I stop the BackupExec Device/Media service, I can still access the drive using HP LTT utility, and HP Data Protector Express – only BackupExec detects the drive as offline. We’ve replaced all possible hardware components and the problem still remains This problem only ever occurs with BE, I'm testing with HP Data Proctector Express and MS's Data Protection Manager - all work fine. Luckily, I haven't bought a license for BackupExec yet, however this means I doubt Symantec Support will be willing to spend too much time on it, so I might be forced to go with MS's Data Protection Manager instead if I can't get a resolution soon. Has anyone seen/resolved this issue before? Alistair
Solved
Alistairc
9 years ago Place Backup Exec
8.8KViews
1like
40Comments
Driver needed for Exabyte Magnum 2 x 24
I am needing the driver for Exabyte Magnum 2 x 24 Tape Library running on windows 208r2 - backup exec 2010R3. Can someone point me to the URL for me to download the driver.
arbodu
9 years ago Place Backup Exec
609Views
0likes
1Comment
ANY MATERIALS FOR A FRESHER TO CRACK THE CERTIFICATION EXAM
Hi, i am fresher going to da certification on Netbackup tool. please give me any suggestions as : 1) which certification will help me a lot to work on Netbackup all kinds of services. 2) materials which can be helpful for cracking the exam other than the guides provided by the website. 3) what should i do to be more competent enough to handle all the situations in the environment while dealing with this tool. Regards, vinay sai
Solved
pravinay
9 years ago Place NetBackup
1.4KViews
0likes
2Comments
How do I get User Input for a manual SQL Query
I currently am onVersion 7.6.0.4 (Build 20141024) of OpsCenter and I have a query that gives a list of failed backups. I need to give the user date range functionality but imbedding that code within the Query itself is yeilding only error messages :( Can someone show me how to do this for my manual Queries. This report returns more than 4 million rows so the date range option is paramount. Much Appreciated!!
ChrisWood214
9 years ago Place OpsCenter
1.2KViews
2likes
7Comments
Symantec Backup Exec 15 Failing
I'm getting this error most of the time but sometimes, the same backup job is successful also even without doing anything. Running on Windows 2012 R2 V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes.
romdel
9 years ago Place Backup Exec
607Views
0likes
2Comments
Restore SDR
staff Please help me wanted simulates a fatal error in the backup server exec 2012 we possess, which can not be ultilizado the root cause of this problem was a failure records in storage, which contains the backup and virtual machines, all stop, just I got tape device lto 4, and tape backup of all server, I'll redo it again first wanted back the exec backup server using backup and trough the iso image of the disaster "SDR" against retrieval system, ai then restore all the server. how do I do? Thank you.
Solved
Mauricio-Brazil
10 years ago Place Backup Exec
1KViews
0likes
3Comments
Restaurar Servidor BackupExec com Recuperação Apos Desastre
Pessoal, me ajudem por favor queria simula um erro fatal no servidor do backup exec 2012 que possuimos, no qual não pode ser ultilizado a causa raiz desse problema foi uma falha grava no storage, que contem os backup e maquinas virtuais, tudo paro, tenho apenas o dispositivo de fita lto 4,e fitacom o backup de todos os server, vou refazer tudo novamente mais primeiro queria volta o servidor do backup exec usando backup e atravez da imagem iso do sistema de recuperação contra desastre, ai depois restaurar todos os server. como faço? Obrigado.
Mauricio-Brazil
10 years ago Place Backup Exec
1KViews
0likes
0Comments
Error e00084ca with LTO3 tape
Dear Support, i'm trying to restore data from LTO3 in BE2010. the invontory completed 100% but when i try the catalog i had errore00084ca"The data being read from the media is inconsistent" . can you please help me. it's very urgent request as i lost all data in our server. Regards.
shix88
10 years ago Place Backup Exec
1KViews
0likes
6Comments