Error messages

105 Topics

vcs resource status abnormal
I am facing a problem,i found a resource become online monitor timeout , and i don't know how to fix it ; could anybody give me some suggestion. thanks; #hastatus .............. group resource system message --------------- -------------------- -------------------- -------------------- cfsmount1 CCCG09BER ONLINE cfsmount1 CCCG10BER ONLINE cfsmount2 CCCG09BER ONLINE cfsmount2 CCCG10BER ONLINE ------------------------------------------------------------------------- cvmvoldg1 CCCG09BER ONLINE cvmvoldg1 CCCG10BER ONLINE group resource system message --------------- -------------------- --------------- -------------------- cvmvoldg1 CCCG09BER |MONITOR TIMEDOUT|UNABLE TO OFFLINE| cvmvoldg2 CCCG09BER ONLINE cvmvoldg2 CCCG10BER ONLINE cvmvoldg2 CCCG09BER |MONITOR TIMEDOUT|UNABLE TO OFFLINE| --------------------------------------------------------------------------------------------------------------------------------------------- # hares -state cvmvoldg1 #Resource Attribute System Value cvmvoldg1 State CCCG09BER ONLINE|MONITOR TIMEDOUT cvmvoldg1 State CCCG10BER ONLINE # # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t0d0s2 auto:SVM - - SVM c0t1d0s2 auto:SVM - - SVM c0t2d0s2 auto:none - - online invalid c0t3d0s2 auto:none - - online invalid c3t0d0 auto:cdsdisk - - online c3t0d1 auto:sliced mmdatadgemcpower4 mmdatadg online shared c3t0d2 auto:cdsdisk - - online c3t0d3 auto:cdsdisk - - online c3t0d4 auto:sliced mmdbdgemcpower2 mmdbdg online shared c3t0d5s2 auto:sliced mmdatadgc3t0d5 mmdatadg online shared c3t0d6s2 auto:sliced mmdatadgc3t0d6 mmdatadg online shared c3t0d7s2 auto:sliced mmdatadgc3t0d7 mmdatadg online shared c3t0d8s2 auto:sliced mmdatadgc3t0d8 mmdatadg online shared c3t0d9s2 auto:sliced mmdatadgc3t0d9 mmdatadg online shared c3t0d10s2 auto:sliced mmdatadgc3t0d10 mmdatadg online shared # vxprint Disk group: mmdbdg TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 dg mmdbdg mmdbdg - - - - - - dm mmdbdgemcpower2 c3t0d4 - 419348384 - - - - v vol01 fsgen ENABLED 419346432 - ACTIVE - - pl vol01-01 vol01 ENABLED 419346432 - ACTIVE - - sd mmdbdgemcpower2-01 vol01-01 ENABLED 419346432 0 - - - Disk group: mmdatadg TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0 PUTIL0 dg mmdatadg mmdatadg - - - - - - dm mmdatadgc3t0d5 c3t0d5s2 - 1467866928 - - - - dm mmdatadgc3t0d6 c3t0d6s2 - 1887246288 - - - - dm mmdatadgc3t0d7 c3t0d7s2 - 1836919616 - - - - dm mmdatadgc3t0d8 c3t0d8s2 - 1887246288 - - - - dm mmdatadgc3t0d9 c3t0d9s2 - 1887246288 - - - - dm mmdatadgc3t0d10 c3t0d10s2 - 1417511040 - - - - dm mmdatadgemcpower4 c3t0d1 - 1887354784 - - - - v vol01 fsgen ENABLED 12271390720 - ACTIVE - - pl vol01-01 vol01 ENABLED 12271390720 - ACTIVE - - sd mmdatadgemcpower4-01 vol01-01 ENABLED 1887354784 0 - - - sd mmdatadgc3t0d5-01 vol01-01 ENABLED 1467866928 1887354784 - - - sd mmdatadgc3t0d6-01 vol01-01 ENABLED 1887246288 3355221712 - - - sd mmdatadgc3t0d7-01 vol01-01 ENABLED 1836919616 5242468000 - - - sd mmdatadgc3t0d8-01 vol01-01 ENABLED 1887246288 7079387616 - - - sd mmdatadgc3t0d9-01 vol01-01 ENABLED 1887246288 8966633904 - - - sd mmdatadgc3t0d10-01 vol01-01 ENABLED 1417510528 10853880192 - - - messages in engine_A log: 2015/03/06 13:44:21 VCS ERROR V-16-2-13027 (CCCG09BER) Resource(cvmvoldg2) - monitor procedure did not complete within the expected time. 2015/03/06 13:44:22 VCS ERROR V-16-2-13027 (CCCG09BER) Resource(cvmvoldg1) - monitor procedure did not complete within the expected time. 2015/03/06 13:46:28 VCS INFO V-16-1-50086 CPU usage on CCCG09BER is 61% 2015/03/06 13:50:21 VCS ERROR V-16-2-13210 (CCCG09BER) Agent is calling clean for resource(cvmvoldg2) because 4 successive invocatio ns of the monitor procedure did not complete within the expected time. 2015/03/06 13:50:21 VCS ERROR V-16-2-13210 (CCCG09BER) Agent is calling clean for resource(cvmvoldg1) because 4 successive invocatio ns of the monitor procedure did not complete within the expected time. 2015/03/06 13:50:39 VCS INFO V-16-2-13068 (CCCG09BER) Resource(cvmvoldg2) - clean completed successfully. 2015/03/06 13:50:53 VCS INFO V-16-2-13068 (CCCG09BER) Resource(cvmvoldg1) - clean completed successfully. 2015/03/06 13:51:40 VCS ERROR V-16-2-13077 (CCCG09BER) Agent is unable to offline resource(cvmvoldg2). Administrative intervention m ay be required. 2015/03/06 13:51:55 VCS ERROR V-16-2-13077 (CCCG09BER) Agent is unable to offline resource(cvmvoldg1). Administrative intervention m ay be required.
Solved
ebotang
10 years ago Place Cluster Server
1.1KViews
3likes
1Comment
Can't locate object method "QEMU" Error During Upgrade to 6.0.x
Hi all, I have a two node VCS cluster running on two KVM Virtual Machines RHEL 5.5. VCS version is currently 5.1 SP1 RP2 and I'm trying to upgrade it to version 6.0.1. Right after I run the installer script I get the following error: [root@Hostname rhel5_x86_64]# pwd /shared_data/VCS/dvd1-redhatlinux/rhel5_x86_64 [root@Hostname rhel5_x86_64]# ./installer Can't locate object method "QEMU" via package "Padv::RHEL5x8664" at /shared_data/VCS/dvd1-redhatlinux/rhel5_x86_64/scripts/EDR/Padv/Linux.pm line 1061. [root@Hostname rhel5_x86_64]# Has anyone encountered such an error before? I've contacted support and so far they have only instructed me to approach RedHat and open a ticket with them. Any help will be much appreciated. Thanks, Yair
Solved
yairz
12 years ago Place Cluster Server
625Views
3likes
4Comments
Agent failed in VCS
Agent are in failed status. Below are the messages in engineA.log file. Please let me knwo the cause of this issue VCS WARNING V-16-1-53025 Agent Script has faulted; ipm connection was lost; restarting the agent VCS ERROR V-16-1-10015 Cannot start /opt/VRTSvcs/bin/Script/ScriptAgent please check file VCS WARNING V-16-1-53025 Agent NIC has faulted; ipm connection was lost; restarting the agent VCS ERROR V-16-1-10008 Agent NIC has faulted 6 times since VCS ERROR V-16-1-10015 Cannot start /opt/VRTSvcs/bin/NIC/NICAgent please check file VCS WARNING V-16-10001-4028 (unix) IP:Unix-G1-IP:monitor:Empty NetMask is supplied, default netmask will be used. VCS WARNING V-16-1-10023 Agent DiskGroup not sending alive messages since VCS WARNING V-16-1-53025 Agent DiskGroup has faulted; ipm connection was lost; restarting the agent VCS ERROR V-16-1-10015 Cannot start /opt/VRTSvcs/bin/DiskGroup/DiskGroupAgent please check file
Solved
sureshpeters
11 years ago Place Cluster Server
7.4KViews
2likes
4Comments
Service Group Failover fails !!!
Hi there, I'm having an issue with one of our cluster wherein, when tried to fail-over the service group it failed with below errors - 2013/10/30 22:22:19 VCS ERROR V-16-2-13006 (XXXXX) Resource(vdaappdg_dg): clean procedure did not complete within the expected time. 2013/10/30 22:22:30 VCS ERROR V-16-2-13006 (XXXXX) Resource(vdrapp_vol): clean procedure did not complete within the expected time. 2013/10/30 22:22:32 VCS ERROR V-16-2-13027 (XXXXX) Resource(mobius_dg) - monitor procedure did not complete within the expected time. 2013/10/30 22:23:30 VCS ERROR V-16-2-13077 (XXXXX) Agent is unable to offline resource(vdrapp_vol). Administrative intervention may be required. 2013/10/30 22:26:48 VCS ERROR V-16-2-13077 (XXXXX) Agent is unable to offline resource(vdaappdg_dg). Administrative intervention may be required. 2013/10/30 22:32:35 VCS ERROR V-16-2-13063 (XXXXX) Agent is calling clean for resource(mobius_dg) because offline did not complete within the expected time. 2013/10/30 22:33:22 VCS INFO V-16-2-13068 (XXXXX) Resource(mobius_dg) - clean completed successfully. 2013/10/30 22:37:24 VCS ERROR V-16-2-13027 (XXXXX) Resource(mobius_dg) - monitor procedure did not complete within the expected time. 2013/10/30 22:37:24 VCS ERROR V-16-2-13077 (XXXXX) Agent is unable to offline resource(mobius_dg). Administrative intervention may be required. Background - On this cluster we have large number of disks and worth of 54 TB data. DG-NAME #VD (GB) TOTAL used free mobius 176 14031.25 14000.00 31.25 vdaappdg 534 42596.69 40628.76 1967.93 While VCS fail-over happens it simply hangs! and says "Agent is unable to offline resource(vdrapp_vol). Administrative intervention may be required." As far as I understand, this message displays when an offline procedure does not complete on time. An offline procedure timeout can occur when the system is overloaded, is busy processing a system call, or is handling a large number of resources. I wanted to know if someone has ever gone through such a situation & if someone can advice if this is happening due to large number of storage?? Waiting for experts advice and possibly solution in order to make sure fail-over functionality works seamlessly. Thank you/Nilesh
Solved
Nilesh_Joshi
11 years ago Place Cluster Server
2.7KViews
2likes
6Comments
VCSCOMM Error
Hi, Problem:VCSComm server cannot startup and LLT is not running In Window Application Event log: Event prompt "VCSCOMM error: lltconfig-c LLT lltconfig ERROR V-14-2-15108 IOCTL_GLOBAL_STATS failed" LLT lltconfig ERROR V-14-2-15108 IOCTL_GLOBAL_STATS failed, The parameter is incorrect ... Anyone know how to shoot this problem?
Solved
AnthonyTsang
12 years ago Place Cluster Server
796Views
2likes
6Comments
Error During VCS configuration
Hi All, I have setup VCS Lab on my own laptop Environment is as follows: Veritas Workstation 8.0 2 x VMS with 1.5 GB RAM each, Solaris 10 U9 64-bit OS. With All pre-requisites like 3 NICS. 1 for Public interface 2 for Private interface i.e. for I/O fencing. Authentication without root password. for shared Storage I have created one more VM with Solaris 10 OS and few disks are shared using iscsi protocol to two node cluster. I am able to install x_86 VCS 5.1 on this two node cluster sucessfully. But when I am trying to configure cluster using ./installvcs -configure I observed following error : Veritas Cluster Server 5.1 SP1 Configure Program [m [7m prod dev [m [1m 1[0m) Configure heartbeat links using LLT over Ethernet [1m 2[0m) Configure heartbeat links using LLT over UDP [1m 3[0m) Automatically detect configuration for LLT over Ethernet [1m b[0m) Back to previous menu [1mHow would you like to configure heartbeat links? [1-3,b,q,?] (3)[0m 1 Discovering NICs on prod ............................................................................................ Discovered e1000g0 e1000g1 e1000g2 e1000g3 [1mEnter the NIC for the first private heartbeat link on prod: [b,q,?] (e1000g2)[0m [1mWould you like to configure a second private heartbeat link? [y,n,q,b,?] (n)[0m y [1mEnter the NIC for the second private heartbeat link on prod: [b,q,?] (e1000g3)[0m [1mWould you like to configure a third private heartbeat link? [y,n,q,b,?] (n)[0m [1mDo you want to configure an additional low-priority heartbeat link? [y,n,q,b,?] (n)[0m [1mAre you using the same NICs for private heartbeat links on all systems? [y,n,q,b,?] (y)[0m Can't use string ("VCS51") as a HASH ref while "strict refs" in use at ../scripts/CPIP/Prod/VCS51.pm line 3870, <STDIN> line 10. I tried to google above problem but could not find the answer , if anybody encounter such error and resolved this pls help me to resolve. For any further info. require pls reply. Thanks & Regards Anish
Solved
Anish
13 years ago Place Cluster Server
4.9KViews
2likes
17Comments
VCS new volume created. Need to add up under existing Resource Group under 2 node clustered Solaris 10 Server...Important..please assist
Hi, I am newbi to VCS. OS is Solaris10. Two node cluster env. New filesystem already created and mounted with dedicated Vertual IP and is already under VCS. We have added two more Vol's (Vol03 & Vol04) in the existing Resource Group say 'node1_rg' Guys, please help me out to know the sequential and step by step procedure with commands to take the newly created Volumes under existing Resource Group......and how to carry out the Failover Test. this is a test server on which we need to do the task. Oracle Database is also there and we can coordinate with App & DBA team to do this activity...... Pleaseeeeeeee help. this is first time I had been to this forum seeking the help... Thanks, Rinku, Pune- India
Solved
hirinkus1
15 years ago Place Cluster Server
3.3KViews
2likes
9Comments
V-16-20062-55 SVCCopyServices:online:Failed to get the cluster id
I am getting the following error when trying to online the SVCCopyService on windows, this comes up immediately there is no delay in receiving the message in the Status window. V-16-20062-55 (SERVERNAME) SVCCopyServices:RES-SVCCopyServices:online:Failed to get the cluster id We have exactly the same resource configuration on our UNIX system and this connects without any issues. We have also been able to run the plink command in an elevated command prompt window and this can connect to the SAN and run queries so I am a bit stumped. I have attached screenshots of the testing and error logs. Any suggestions would be greatly appreciated: OS - Windows 2012 R2 Standard VCS - 6.1 SAN - IBM V840
Solved
robhull
9 years ago Place Cluster Server
2.1KViews
1like
7Comments
VCS Setup - "Install A Clustered Master Server" Greyed Out
I originally posted this in the NetBackup forum but it seems to be a VCS issue that is the root of the problem: https://www-secure.symantec.com/connect/forums/install-clustered-master-server-greyed-out I am trying to set up a test NBU 7.6.0.1 master server cluster with VCS on Windows Server 2008 R2but the option to "install a clustered master server" is greyed out. I have built2 new servers, installed SFHA / VCS 6.0.1and configured disks / volumes / disk groups / VVR replication. The VCS installation has not been modified or customised in any way as from my understanding the NBU installation will create its own service group. I have carried out the initial configuration and added the remote cluster node. Within cluster explorer, the defaultClusterService service group is all up and running, the global cluster option is enabled andthe remote cluster status also shows that the other cluster is up. Marianne has alreadyasked me to run two commands with the following output: 'gabconfig -a' - "GAB gabconfig ERROR V-15-2-25022" lltconfig -nvv - "LLT lltconfig ERROR V-14-2-15000 open \\.\llt failed: error number: 0x2" I've probably just made a silly mistake somewherebut I can't figure outwhat piece of the puzzle I have missed - any ideas?
Solved
Shaun_Taylor
10 years ago Place Cluster Server
4.6KViews
1like
37Comments
Note able to configure the HA Proxy with Application Agent
Hi Guys, I am not able to configure the HA proxy with application AGENT. its not giving the status after probed completed. Application HAPROXY ( Critical = 0 StartProgram = "/usr/src/haproxy-1.5.12/HAPROXY start" StopProgram = " /usr/src/haproxy-1.5.12/HAPROXY stop" CleanProgram = "/usr/src/haproxy-1.5.12/HAPROXY stop" PidFiles = { "/var/run/haproxy.pid" } MonitorProcesses = { haproxy } ) ------------------------------------------------------------------------------------------------------------------ ApplicationAgent logs -- 2015/07/06 15:57:15 VCS DBG_AGDEBUG Calling monitor for resource HAPROXY VCSAgType.C:call_monitor[1492] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:monitor program <> before squeeze() Application.C:isMonitorProgramConfigured[1286] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:inside function squeeze(),arguments passed is <> Application.C:squeeze[1339] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Exiting from function squeeze, no of tokens are <0> , returning <-1> Application.C:squeeze[1379] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:monitor program <> after squeeze() Application.C:isMonitorProgramConfigured[1298] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Exiting from isMonitorProgramConfigured, return code <0> Application.C:isMonitorProgramConfigured[1299] 2015/07/06 15:57:15 VCS DBG_1 Application:HAPROXY:monitor:UseSUDash:<0>. Application.C:application_monitor[167] 2015/07/06 15:57:15 VCS DBG_1 Application:HAPROXY:monitor:State=<0>, IState=<1> Application.C:application_monitor[188] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Validating and retrieving the information for user <root> Application.C:application_monitor[190] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Retrieving information for User <root> Application.C:getuserinfo[1233] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Retrieved information for: User <root> Home Directory </root> Login Name <root> Default Shell </bin/bash> Application.C:getuserinfo[1252] 2015/07/06 15:57:15 VCS DBG_AGDEBUG Monitor-Info is 5 VCSAgPrimitives.C:VCSAgGetMonitorLevel[4588] 2015/07/06 15:57:15 VCS DBG_AGDEBUG LevelTwoMonitorFreq is 1 VCSAgPrimitives.C:VCSAgIsL2MFSet[4504] 2015/07/06 15:57:15 VCS DBG_3 Application:HAPROXY:monitor:level_one_monitor = [1], level_two_monitor = [2], l2mf set [1] Application.C:application_monitor[211] 2015/07/06 15:57:15 VCS DBG_1 Application:HAPROXY:monitor:Total number of Pid Files specified:1. Application.C:application_monitor[226] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Checking for PidFile:</var/run/haproxy.pid> Application.C:application_monitor[235] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:inside function squeeze(),arguments passed is </var/run/haproxy.pid> Application.C:squeeze[1339] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Exiting from function squeeze, no of tokens are <1> , returning <0> Application.C:squeeze[1379] 2015/07/06 15:57:15 VCS DBG_5 Application:HAPROXY:monitor:Checking for pid in PidFile:</var/run/haproxy.pid> Application.C:application_monitor[249] 2015/07/06 15:57:15 VCS DBG_4 Application:HAPROXY:monitor:Got pid-file:/var/run/haproxy.pid to check for the pid. Application.C:pidExists[419] 2015/07/06 15:57:15 VCS DBG_3 Application:HAPROXY:monitor:Found pid (17961) from pid-file (/var/run/haproxy.pid). Application.C:pidExists[457] 2015/07/06 15:57:15 VCS DBG_2 Application:HAPROXY:monitor:Pid-file:</var/run/haproxy.pid>; checking the existence of pid:<17961> Application.C:pidExists[467] 2015/07/06 15:57:15 VCS DBG_3 Application:HAPROXY:monitor:Error occured. Pid-file:</var/run/haproxy.pid>; Pid (17961) does not exists. Application.C:pidExists[472] Application.C:pidExists[472] 2015/07/06 15:57:15 VCS DBG_4 Application:HAPROXY:monitor:Status got after checking Pid File (/var/run/haproxy.pid):OFFLINE. Application.C:application_monitor[255] 2015/07/06 15:57:15 VCS DBG_AGINFO Resource(HAPROXY) - monitor entry point exited with a confidence value 0. VCSAgType.C:call_monitor[1584] 2015/07/06 15:57:15 VCS DBG_AGINFO HAPROXY reported state (Offline) & conf_level (0) VCSAgRes.C:call_entry_point[1599] 2015/07/06 15:57:15 VCS DBG_AGDEBUG Canceling timer for (HAPROXY) op(1608) VCSAgTimer.C:_cancel[947] ============================================== Engine_A_logs. VCS_CONF=/etc/VRTSvcs VCS_DIAG=/var/VRTSvcs VCS_HOME=/opt/VRTSvcs VCS_LOG_AGENT_NAME= VCS_LOG_CATEGORY=6 VCS_LOG_SCRIPT_NAME=hatrigger VCS_LOG=/var/VRTSvcs ########## Other Environment Variables ########## CONSOLETYPE=vt LANG=en_US.UTF-8 LANGSH_SOURCED=1 LD_LIBRARY_PATH=/opt/VRTSvcs/lib: PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/sbin:/usr/sbin:/bin:/usr/bin:/opt/VRTSvcs/bin previous=N PREVLEVEL=N PWD=/var/VRTSvcs/diag/had runlevel=5 RUNLEVEL=5 SHLVL=5 SYSTEMCTL_SKIP_REDIRECT=true TERM=linux UPSTART_EVENTS=runlevel UPSTART_INSTANCE= UPSTART_JOB=rc _=/usr/bin/env 2015/07/06 15:36:40 VCS INFO V-16-6-15002 (DTPJBS01) hatrigger:hatrigger executed /opt/VRTSvcs/bin/internal_triggers/dump_tunables DTPJBS01 1 successfully 2015/07/06 15:36:42 VCS NOTICE V-16-1-10438 Group ClusterService has been probed on system DTPJBS01 2015/07/06 15:36:43 VCS INFO V-16-1-10304 Resource JBOSS (Owner: Unspecified, Group: JBOSS_APP) is offline on DTPJBS01 (First probe) 2015/07/06 15:36:43 VCS NOTICE V-16-1-10438 Group JBOSS_APP has been probed on system DTPJBS01 2015/07/06 15:36:43 VCS INFO V-16-1-50007 Initiating auto-start online of group JBOSS_APP 2015/07/06 15:36:43 VCS INFO V-16-1-10493 Evaluating DTPJBS01 as potential target node for group JBOSS_APP 2015/07/06 15:36:43 VCS NOTICE V-16-1-10233 Clearing Restart attribute for group JBOSS_APP on all nodes 2015/07/06 15:36:43 VCS NOTICE V-16-1-10301 Initiating Online of Resource JBOSS (Owner: Unspecified, Group: JBOSS_APP) on System DTPJBS01 2015/07/06 15:36:44 VCS NOTICE V-16-1-10438 Group VCShmg has been probed on system DTPJBS01 2015/07/06 15:36:44 VCS NOTICE V-16-1-10435 Group VCShmg will not start automatically on System DTPJBS01 as the system is not a part of AutoStartList attribute of the group. 2015/07/06 15:36:56 VCS INFO V-16-1-10298 Resource JBOSS (Owner: Unspecified, Group: JBOSS_APP) is online on DTPJBS01 (VCS initiated) 2015/07/06 15:36:56 VCS NOTICE V-16-1-10447 Group JBOSS_APP is online on system DTPJBS01 2015/07/06 15:52:41 VCS INFO V-16-1-55029 Resource HAPROXY in offline state received recurring offline message on system DTPJBS02 2015/07/06 15:52:55 VCS NOTICE V-16-1-10460 Clearing start attribute for resource HAPROXY of group HAProxy on node DTPJBS01 2015/07/06 15:52:55 VCS NOTICE V-16-1-10233 Clearing Restart attribute for group HAProxy on all nodes 2015/07/06 15:52:55 VCS NOTICE V-16-1-10301 Initiating Online of Resource HAPROXY (Owner: Unspecified, Group: HAProxy) on System DTPJBS02 2015/07/06 15:52:55 VCS INFO V-16-1-50159 User fired command: hares -online HAPROXY DTPJBS02 from node DTPJBS01 2015/07/06 15:54:56 VCS ERROR V-16-2-13066 (DTPJBS02) Agent is calling clean for resource(HAPROXY) because the resource is not up even after online completed. 2015/07/06 15:54:57 VCS INFO V-16-2-13068 (DTPJBS02) Resource(HAPROXY) - clean completed successfully. 2015/07/06 15:54:57 VCS INFO V-16-2-13071 (DTPJBS02) Resource(HAPROXY): reached OnlineRetryLimit(0). 2015/07/06 15:54:57 VCS ERROR V-16-1-54031 Resource HAPROXY (Owner: Unspecified, Group: HAProxy) is FAULTED on sys DTPJBS02 2015/07/06 15:54:57 VCS NOTICE V-16-1-10446 Group HAProxy is offline on system DTPJBS02 2015/07/06 15:54:57 VCS INFO V-16-6-15015 (DTPJBS02) hatrigger:/opt/VRTSvcs/bin/triggers/resfault is not a trigger scripts directory or can not be executed 2015/07/06 15:55:09 VCS INFO V-16-1-50159 User fired command: hares -clear HAPROXY DTPJBS02 from node DTPJBS01 2015/07/06 15:55:09 VCS INFO V-16-1-10307 Resource HAPROXY (Owner: Unspecified, Group: HAProxy) is offline on DTPJBS02 (Not initiated by VCS) 2015/07/06 15:55:13 VCS NOTICE V-16-1-10233 Clearing Restart attribute for group HAProxy on all nodes 2015/07/06 15:55:13 VCS NOTICE V-16-1-10301 Initiating Online of Resource HAPROXY (Owner: Unspecified, Group: HAProxy) on System DTPJBS02 2015/07/06 15:55:13 VCS INFO V-16-1-50159 User fired command: hares -online HAPROXY DTPJBS02 from node DTPJBS01 2015/07/06 15:57:14 VCS ERROR V-16-2-13066 (DTPJBS02) Agent is calling clean for resource(HAPROXY) because the resource is not up even after online completed. 2015/07/06 15:57:15 VCS INFO V-16-2-13068 (DTPJBS02) Resource(HAPROXY) - clean completed successfully. 2015/07/06 15:57:15 VCS INFO V-16-2-13071 (DTPJBS02) Resource(HAPROXY): reached OnlineRetryLimit(0). 2015/07/06 15:57:15 VCS ERROR V-16-1-54031 Resource HAPROXY (Owner: Unspecified, Group: HAProxy) is FAULTED on sys DTPJBS02 2015/07/06 15:57:15 VCS NOTICE V-16-1-10446 Group HAProxy is offline on system DTPJBS02 2015/07/06 15:57:15 VCS INFO V-16-6-15015 (DTPJBS02) hatrigger:/opt/VRTSvcs/bin/triggers/resfault is not a trigger scripts directory or can not be executed 2015/07/06 16:02:38 VCS INFO V-16-1-50159 User fired command: hares -clear HAPROXY DTPJBS02 from node DTPJBS01 2015/07/06 16:02:38 VCS INFO V-16-1-10307 Resource HAPROXY (Owner: Unspecified, Group: HAProxy) is offline on DTPJBS02 (Not initiated by VCS) 2015/07/06 16:02:43 VCS INFO V-16-1-55029 Resource HAPROXY in offline state received recurring offline message on system DTPJBS02 2015/07/06 16:03:29 VCS INFO V-16-1-50159 User fired command: haconf -dump from node DTPJBS01 2015/07/06 18:48:51 VCS INFO V-16-1-53504 VCS Engine Alive message!! 2015/07/06 22:48:52 VCS INFO V-16-1-53504 VCS Engine Alive message!! 2015/07/07 02:48:53 VCS INFO V-16-1-53504 VCS Engine Alive message!! 2015/07/07 06:48:54 VCS INFO V-16-1-53504 VCS Engine Alive message!! Please hlep.
lazaur
10 years ago Place Cluster Server
1.9KViews
1like
8Comments