tape drive shows active , but the ready column shows NO
This particular tape drive is not showing any drives loaded and the Ready column shows NO /vmdareq -display HP.ULTRIUM4-SCSI.003 - AVAILABLE bellows SCAN_HOST UP scooter UP fozzie UP HP.ULTRIUM4-SCSI.004 - AVAILABLE bellows SCAN_HOST UP scooter UP fozzie UP HP.ULTRIUM4-SCSI.005 - RESERVED on Mon Feb 29 06:07:54 2016 bellows UP scooter UP fozzie UP I dont know a thing about tape drives and all of the link in symantec/ veritas site point to old web pages that no longer work.Solved7KViews1like5Comments
NDMP Backup error: ndmp_data_connect_v3 failed
Hi All, I have a problem with NDMP Remote Backup of NAS: DELL FS8600. When running the backup this error is displayed in ndmpagent log: Connecting and authenticating to NAS server fs_user_rgb.xxxxxxx.edu.coPID:13678 File ID:134 16:05:22.782 Using credentials passed inPID:13678 File ID:134 16:05:22.782 ndmp_open_and_auth_via_host: hostname=fs_user_rgb.xxxxxxx.edu.co, via_hostname=fs_user_rgb.xxxxxxx.edu.coPID:13678 File ID:134 16:05:22.782 ndmp_connect_to_server: hostname = fs_user_rgb.xxxxxxx.edu.co, portname = 10000PID:13678 File ID:134 16:05:23.788 ndmp_authenticate_connection: using NDMP protocol version 4PID:13678 File ID:134 16:05:23.890 EmEventManager::EnableSocketEvent socket 9 type InputPID:13678 File ID:134 16:05:23.891 EmEventManager::EnableSocketEvent socket 9 type ErrorPID:13678 File ID:134 16:05:23.891 TO BRM: INF - VERSION=2PID:13678 File ID:134 16:05:23.903 ndmp_mover_set_window(0, 1073740775424)PID:13678 File ID:134 16:05:23.903 Attempting to create server to which remote host fs_user_rgb.xxxxxxx.edu.co can connect - IPv4PID:13678 File ID:134 16:05:23.903 Using hostname from config file: NDMP_DATA_CONNECTION_HOST_NAME=alcalaPID:13678 File ID:134 16:05:23.904 Using IP address: 157.253.77.49 (for configured host alcala)PID:13678 File ID:134 16:05:23.904 Creating server for 157.253.77.49 in Server Port Window 1025 to 5000PID:13678 File ID:134 16:05:23.905 Listen address = 157.253.77.49 port 2859PID:13678 File ID:134 16:05:23.905 EmEventManager::EnableSocketEvent socket 12 type InputPID:13678 File ID:134 16:08:32.953 ndmp_data_connect failed, status = 23 (NDMP_CONNECT_ERR)PID:13678 File ID:134 16:08:32.953 [Error] ndmp_data_connect_v3 failed, status = -1 (-1)PID:13678 File ID:134 16:08:33.583 ../NdmpBackupManager.cpp(778) - error code 25 (cannot connect on socket)PID:13678 File ID:134 Any idea?Solved7KViews1like7Comments
Unable to restore NDMP Backup
We are currently having an issue when restoring backups of our NDMP connected NetApp. We have successfully backed up the data, but there seems to be an issue with any restore of that data. We have confirmed that the NDMP resource is reachable: C:\Program Files\Veritas\Volmgr\bin>tpautoconf -verify plumfas02 Connecting to host "plumfas02" as user "netbackup"... Waiting for connect notification message... Opening session--attempting with NDMP protocol version 4... Opening session--successful with NDMP protocol version 4 host supports MD5 authentication Getting MD5 challenge from host... Logging in using MD5 method... Host info is: host name "plumfas02" os type "NetApp" os version "NetApp Release 8.1.2 7-Mode" host id "1574505273" Login was successful Host supports LOCAL backup/restore Host supports 3-way backup/restore We have confirmed that the NDMP is listed with the FQDN: C:\Program Files\Veritas\Volmgr\bin>nbemmcmd -listhosts -verbose NBEMMCMD, Version: 7.6.0.1 The following hosts were found: plumnbu01 MachineName = "plumnbu01" FQName = "plumnbu01" MachineDescription = "" MachineNbuType = server (6) plumnbu01.plumbedford.local ClusterName = "" MachineName = "plumnbu01.plumbedford.local" FQName = "PLUMNBU01.PlumBedford.local" GlobalDriveSeed = "VEND:#.:PROD:#.:IDX" LocalDriveSeed = "" MachineDescription = "" MachineFlags = 0x17 MachineNbuType = master (3) MachineState = active for tape and disk jobs (14) NetBackupVersion = 7.6.0.1 (760100) OperatingSystem = windows (11) ScanAbility = 5 plumfas02 MachineName = "plumfas02" FQName = "plumfas02.PlumBedford.local" MachineDescription = "" MachineFlags = 0 MachineNbuType = ndmp (2) plumfas01 MachineName = "plumfas01" FQName = "plumfas01.PlumBedford.local" MachineDescription = "" MachineFlags = 0x1 MachineNbuType = ndmp (2) (snapvault) Command completed successfully. However, we continue to receive failures whenever a restore is attempted: 1/7/2014 10:37:33 AM - begin Restore 1/7/2014 10:37:34 AM - 1 images required 1/7/2014 10:37:34 AM - media 000278 required 1/7/2014 10:38:07 AM - restoring image plumfas02_1388786329 1/7/2014 10:38:07 AM - Info bpbrm(pid=8828) PLUMNBU01.PlumBedford.local is the host to restore to 1/7/2014 10:38:07 AM - Info bpbrm(pid=8828) telling media manager to start restore on client 1/7/2014 10:38:08 AM - Info bpbrm(pid=936) PLUMNBU01.PlumBedford.local is the host to restore to 1/7/2014 10:38:08 AM - Info bpbrm(pid=936) start tar32 on client 1/7/2014 10:38:08 AM - Info tar32(pid=10600) Restore started. 1/7/2014 10:38:08 AM - connected 1/7/2014 10:38:08 AM - Error bptm(pid=11008) NBJM returned an extended error status: Requested NDMP machine does not have credentials or is not configured in NetBackup (2108) 1/7/2014 10:38:08 AM - Error ndmpagent(pid=10600) NDMP restore failed from path UNKNOWN 1/7/2014 10:38:08 AM - Info bpbrm(pid=8828) got ERROR 252 from media manager 1/7/2014 10:38:08 AM - Info ndmpagent(pid=10600) done. status: 150: termination requested by administrator 1/7/2014 10:38:08 AM - Info bpbrm(pid=8828) terminating bpbrm child 936 jobid=22048 1/7/2014 10:38:08 AM - requesting resource 000278 1/7/2014 10:38:08 AM - Error nbjm(pid=6016) NBU status: 2108, EMM status: Requested NDMP machine does not have credentials or is not configured in NetBackup 1/7/2014 10:38:08 AM - Error nbjm(pid=6016) NBU status: 2108, EMM status: Requested NDMP machine does not have credentials or is not configured in NetBackup 1/7/2014 10:38:09 AM - restored image plumfas02_1388786329 - (extended error status has been encountered, check logs(252)); restore time 0:00:02 1/7/2014 10:38:09 AM - end Restore; elapsed time: 0:00:36 Restore error(2850) This seems to occur no matter where we try and restore the data to, even back to the original location. Any advice? -JDSolved5.9KViews1like18Comments
NDMP_XDR_DECODE_ERR
I have a Solaris 10 master/media server running 7.0.1and a Solaris 10media server (7.0.1) with a direct connected C4 Tape library. . . a;sldkfja;sldfj I am trying to backup a NetApp partition to the aforementioned C4 Tape Library using an NDMP policy. Getting the following: Dec 6, 2011 7:40:01 AM - estimated 0 kbytes needed Dec 6, 2011 7:40:02 AM - started process bpbrm (pid=20725) Dec 6, 2011 7:40:02 AM - connecting Dec 6, 2011 7:40:02 AM - connected; connect time: 0:00:00 Dec 6, 2011 7:40:04 AM - mounting X109L2 Dec 6, 2011 7:40:47 AM - mounted X109L2; mount time: 0:00:43 Dec 6, 2011 7:40:47 AM - positioning X109L2 to file 1 Dec 6, 2011 7:40:54 AM - positioned X109L2; position time: 0:00:07 Dec 6, 2011 7:40:54 AM - begin writing Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) connection 0x100301ca0 ndmp_message_process_one_failed, status = NDMP_XDR_DECODE_ERR Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) eof is set - connection 0x100301ca0 Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) NDMP backup failed, path = /vol/v2011_3/ Dec 6, 2011 10:39:10 AM - Error ndmpagent (pid=20730) ndmp_data_get_state_failed, status = 12 (NDMP_EOF_ERR) Dec 6, 2011 10:40:48 AM - end writing; write time: 2:59:54 NDMP backup failure (99) Does anyone have any experience with this? Ever seen this? Any help would be greatly appreciated. rickSolved5.2KViews1like4Commentsndmp_data_get_state_failed, status = 18 (NDMP_XDR_DECODE_ERR)
Dear NBU champions I am using NBU 7.5.0.5 on master server win 2k8 R2. NDMP client -- EMC ISILON backup selection in NDMP policy -- /XYZ (29GB) /abc(63GB) Iam facing problem only with /xyz as itscompletes only in 4th or 5th attampts (with below errors) & every time it writes 30% 40% data on tape , other stream completes with on issue. 1/4/2014 10:57:35 AM - positioned 0092L4; position time: 00:01:28 1/4/2014 10:57:35 AM - begin writing 1/4/2014 11:05:42 AM - Error ndmpagent(pid=2216) ndmp_data_get_state_failed, status = 18 (NDMP_XDR_DECODE_ERR) 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) connection 0x1400c50 ndmp_message_process_one_failed, status = NDMP_ILLEGAL_STATE_ERR 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) eof is set - connection 0x1400c50 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) NDMP backup failed, path = /ifs/data/proj/xyz 1/4/2014 11:05:43 AM - Error ndmpagent(pid=2216) ndmp_data_get_state_failed, status = 12 (NDMP_EOF_ERR) 1/4/2014 11:06:47 AM - Info bptm(pid=10488) EXITING with status 99 <---------- 1/4/2014 11:06:47 AM - end writing; write time: 00:09:12 NDMP backup failure(99)Solved5KViews1like15Comments
NDMP error 99
Hi, Since fewdays, I have some trouble on my NDMP backups. My backup selection is shared between many streams. All full backup are OK, but some of incr backup failswith status 99. Apparently, the level 0 dump is post-dated, and I have this error : "Aborting the incremental dump of level (1) because the snapshot specified for this backup is older than the one used in the previous dump." 14/02/2016 22:36:37 - connecting 14/02/2016 22:36:37 - connected; connect time: 00:00:00 14/02/2016 22:36:38 - mounting CAD126 14/02/2016 22:38:15 - Info bptm(pid=17364) media id CAD126 mounted on drive index 2, drivepath nrst1a, drivename HP.ULTRIUM5-SCSI.002, copy 1 14/02/2016 22:38:15 - mounted; mount time: 00:01:37 14/02/2016 22:38:20 - Info ndmpagent(pid=18976) bstou103: SCSI: TAPE READ: short read for nrst1a 14/02/2016 22:38:21 - positioning CAD126 to file 44 14/02/2016 22:39:35 - Info ndmpagent(pid=18976) bstou103: DUMP: creating "/vol/volpoles/../snapshot_ for_backup.3112" snapshot. 14/02/2016 22:39:35 - positioned CAD126; position time: 00:01:14 14/02/2016 22:39:35 - begin writing 14/02/2016 22:39:37 - Info ndmpagent(pid=18976) bstou103: DUMP: Using subtree dump 14/02/2016 22:39:51 - Info ndmpagent(pid=18976) bstou103: DUMP: Date of this level 1 dump snapshot: Sun Feb 14 22:40:46 2016. 14/02/2016 22:39:52 - Info ndmpagent(pid=18976) bstou103: DUMP: Date of last level 0 dump: Tue Jan 19 04:14:07 2038. 14/02/2016 22:39:52 - Error ndmpagent(pid=18976) bstou103: DUMP: Aborting the incremental dump of level (1) because the snapshot specified for this backup is older than the one used in the previous dump. 14/02/2016 22:39:52 - Error ndmpagent(pid=18976) bstou103: DUMP: Dump failed to initialize. 14/02/2016 22:39:53 - Error ndmpagent(pid=18976) bstou103: DUMP: DUMP IS ABORTED 14/02/2016 22:39:54 - Info ndmpagent(pid=18976) bstou103: DUMP: Deleting "/vol/volpoles/../snapshot_ for_backup.3112" snapshot. 14/02/2016 22:39:56 - Error ndmpagent(pid=18976) bstou103: DATA: Operation terminated: EVENT: INTERNAL ERROR (for /vol/volpoles/qtpoles/PRP/ SERIS) 14/02/2016 22:39:56 - Error ndmpagent(pid=18976) NDMP backup failed, path = /vol/volpoles/qtpoles/PRP/ SERIS 14/02/2016 22:39:57 - Error bptm(pid=17364) none of the NDMP backups for client bstou103 completed successfully 14/02/2016 22:40:23 - Info bptm(pid=17364) EXITING with status 99 <---------- 14/02/2016 22:40:24 - end writing; write time: 00:00:49 NDMP backup failure(99) Any idea ? My version is 7.5.0.4 Thanks !Solved4.6KViews0likes22CommentsBacking up big data through NDMP
Hi Guys, We have volume size of 42TB data to be backupwith local NDMP backup going to tape library, it is taking more than 20 days to complete, luckly we don't have much network issues. I was wondering if some one suggest me having succesful backup in minimum time? any other methods? Netbackup master: 7.1.0.3 Media: 7.1.0.3 Netapp filer: Ontap 8.1.2P2 I am taking backup using snapshot ex: /vol/TP_MYDOCS/.snapshot/weekly.0 We have snap mirror configured from Productionto DR filer and NDMP backups are being taken from DR filer. Please let me know if any aditional details. Thank you so much in advance. Sagar4.5KViews0likes31Comments
NetBackup Finds Library, But Not Drives Attached using NDMP
Running NetBackup 7.1 on Windows Server 2008 R2. I have an HP StorageWorks MSL4048 tape library with 2 drives installed. These are attached with fibre to 2 fibre channel ports on the back of my NetApp FAS2240. When I run sysconfig -t and sysconfig -m on the NetApp, it shows the 2 tape drives, and the library. When I try to discover these devices in NetBackup using the storage wizard, it only finds the robotic library, and lists the 2 drives as "unused element address". I have seen this happen once before, but that was a probelm with an old NetApp that did not have tape config files for the newer LTO5 drives. This is a new NetApp that already has the HP and IBM LTO5 drive tape config files. And the NetApp detects them successfully anyway. Any ideas why NetBackup does not? We verified that ndmp is ON, and the account name and password should be good, otherwise it would detect nothing at all. I can even unplug the fibre, and run the wizard again, and it detects nothing, so I know that is all working correctly.Solved4.3KViews2likes11Comments
NDMP Backup failing
Hi I have an issue with NDMP backups failing which I'm hoping to find a solution for. I have configured a new appliance running 7.6.0.3 and added it into an existing master media config. Master is windows running 7.6.0.2 and the other media is RHEL running 7.6.0.2. The ndmp host is a netapp already configured and I can successfully write ndmp backups from it to disk storage unit on the master/media which is a Quantum DXI disk pool. The new appliance has an MSDP pool, configured as a disk storage unit and I am trying to write ndmp backups to it. I have added a host file entry on the appliance to it is using the correct Netapp interface. I can telnet to the Netapp on that interface from the appliance on 10000 and tpautoconf -verify also works from the appliance. When I start a backup, I can see a new connection on the netapp by running ndmpd status so I know its making a connection. However, that backup fails with error 99. The below are snippets from ndmpagent, bptm and bpbrm bpbrm 14:03:24.075 [118024] <2> logparams: -backup -S att16bck01 -c ATT16NET01 -ct 19 -ru root -cl DXG16-NMDP-VNAS01 -sched Full -bt 1427979801 -dt 0 -st 0 -b ATT16NET01_1427979801 -mediasvr att16nba01 -jobid 358756 -jobgrpid 358756 -masterversion 760000 -maxfrag 51200 -bpstart_time 1427980103 -reqid -1427812073 -mt 0 -to 0 -stunit att16nba01-shared -rl 2 -rp 1814400 -eari 0 -p PureDiskVolume -mst 6 -flags 2 -storagesvr att16nba01 -sts_type PureDisk -use_ofb -use_otm -jm -secure 1 -kl 28 -rg other -fso -dmplevel 0 -connect_options 16974338 14:03:24.075 [118024] <4> bpbrm main: ensured stderr cannot be used 14:03:24.088 [118024] <2> vnet_pbxConnect: pbxConnectEx Succeeded 14:03:24.088 [118024] <2> logconnections: BPRD CONNECT FROM 10.32.231.12.48233 TO 10.32.231.10.1556 fd = 4 14:03:24.320 [118024] <2> brm_update_local_resiliency: changed = 0 14:03:24.320 [118024] <2> bpbrm main: max_entries_per_add = 5000 14:03:24.320 [118024] <2> ConnectionCache::connectAndCache: Acquiring new connection for host att16bck01, query type 223 14:03:24.328 [118024] <2> vnet_pbxConnect: pbxConnectEx Succeeded 14:03:24.329 [118024] <2> logconnections: BPDBM CONNECT FROM 10.32.231.12.32967 TO 10.32.231.10.1556 fd = 4 14:03:24.407 [118024] <2> db_CLIENTsend: reset client protocol version from 0 to 8 14:03:24.628 [118024] <2> db_getCLIENT: db_CLIENTreceive: no entity was found 227 14:03:24.628 [118024] <2> ConnectionCache::connectAndCache: Acquiring new connection for host att16bck01, query type 223 14:03:24.638 [118024] <2> vnet_pbxConnect: pbxConnectEx Succeeded 14:03:24.638 [118024] <2> logconnections: BPDBM CONNECT FROM 10.32.231.12.47907 TO 10.32.231.10.1556 fd = 4 14:03:24.747 [118024] <2> db_CLIENTsend: reset client protocol version from 0 to 8 14:03:24.979 [118024] <2> db_getCLIENT: db_CLIENTreceive: no entity was found 227 14:03:24.979 [118024] <2> verify_client: ../bpbrm.c.41740: db_getCLIENT failed for CLIENT: att16nba01 14:03:25.812 [118024] <2> bpbrm main: ESTIMATE -1 -1 ATT16NET01_1427979801 14:03:34.720 [118024] <2> bpbrm mm_sig: received ready signal from media manager 14:03:34.911 [118024] <2> bpbrm main: client protocol version 2 14:06:05.852 [118024] <2> bpbrm main: client ATT16NET01 EXIT STATUS = 25: cannot connect on socket 14:06:05.852 [118024] <2> bpbrm kill_child_process: start 14:06:05.852 [118024] <2> bpbrm wait_for_child: start 14:06:07.463 [118024] <2> bpbrm wait_for_child: child exit_status = 99 signal_status = 0 14:06:07.464 [118024] <2> bpbrm Exit: client backup EXIT STATUS 99: NDMP backup failure bptm 14:21:32.063 [122725] <2> Media_siginfo_print: 1: delay 2 signo SIGHUP:1 code 0 pid 122701 14:21:32.064 [122725] <2> Media_library_signal_poll: 1:Terminate detected 14:21:32.064 [122725] <8> vnet_sock_ready_abs: [vnet.c:537] errno=11 sock=29 14:21:32.064 [122725] <2> vnet_sock_ready_abs: vnet.c.539: 0: Function failed: 10 0x0000000a 14:21:32.064 [122725] <16> get_exactly_n_bytes_or_eof_abs: select on socket failed: Resource temporarily unavailable (11) 14:21:32.064 [122725] <2> ts_get_long_abs: error reading long from socket: Resource temporarily unavailable (11) 14:21:32.064 [122725] <2> ts_get_adaptable_string: error reading long from socket: Resource temporarily unavailable (11) 14:21:32.064 [122725] <2> db_getdata: ts_get_string_handle() failed: Resource temporarily unavailable (11) network read error (-3) 14:21:32.064 [122725] <2> db_end: no DONE from db_getreply(): network read failed 14:21:32.064 [122725] <2> cleanup_image_disk: image cleanup failed: 42 14:21:32.065 [122725] <2> bptm: EXITING with status 99 <---------- 14:21:32.065 [122725] <2> set_job_details: Tfile (358758): LOG 1427980892 4 bptm 122725 EXITING with status 99 <---------- 14:21:32.065 [122725] <2> send_job_file: job ID 358758, ftype = 3 msg len = 64, msg = LOG 1427980892 4 bptm 122725 EXITING with status 99 <---------- ndmpagent 0,51216,134,134,22,1427980739695,122724,139941325879040,0:,63:ndmp_connect_to_server: hostname = ATT16NET01, portname = 10000,18:NdmpGlueLogTraceCb,1 0,51216,134,134,23,1427980739719,122724,139941325879040,0:,59:ndmp_authenticate_connection: using NDMP protocol version 4,18:NdmpGlueLogTraceCb,1 0,51216,134,134,24,1427980739757,122724,139941325879040,0:,70:ndmp_enable_extensions: enabling class_id = 0x2050 class_version = 0x3,18:NdmpGlueLogTraceCb,1 0,51216,134,134,25,1427980739757,122724,139941325879040,0:,70:ndmp_enable_extensions: enabling class_id = 0x2051 class_version = 0x1,18:NdmpGlueLogTraceCb,1 0,51216,134,134,26,1427980739757,122724,139941325879040,0:,70:ndmp_enable_extensions: enabling class_id = 0x7ff0 class_version = 0x1,18:NdmpGlueLogTraceCb,1 0,51216,137,134,2,1427980739758,122724,139941325879040,0:,75:[vnet_addrinfo.c:1602] in failed file cache ERR=-2 NAME=ATT16NET01 SVC=NULL,34:vnet_cached_getaddrinfo_and_update,0 0,51216,137,134,3,1427980739758,122724,139941325879040,0:,72:[vnet_addrinfo.c:1271] vnet_cached_getaddrinfo_and_update() failed 6 0x6,23:vnet_cached_getaddrinfo,0 0,51216,134,134,27,1427980739758,122724,139941325879040,0:,87:CreateServer: vnet_cached_getaddrinfo failed, host = ATT16NET01, status = 6, error = -2,22:NdmpAgentLmLogger::Log,1 0,51216,134,134,28,1427980739758,122724,139941325879040,0:,41:Failed to create a listen socket for IPv6,29:NdmpMoverSideShm::MoverListen,1 0,51216,134,134,29,1427980739758,122724,139941325879040,0:,21:Retrying with IPv4...,33:NdmpBackupManager::StartOperation,1 0,51216,134,134,30,1427980739758,122724,139941325879040,0:,37:Using local IP address: 172.31.251.30,22:NdmpAgentLmLogger::Log,1 0,51216,134,134,31,1427980889898,122724,139941325879040,0:,56:ndmp_data_connect failed, status = 23 (NDMP_CONNECT_ERR),28:NdmpDataSideNas::DataConnect,1 2,51216,134,134,32,1427980889898,122724,139941325879040,0:,0:,0:,2,(91|i32:-1|i32:-1|) 1,51216,134,134,33,1427980890333,122724,139941325879040,0:,0:,26:NdmpAgent::SetErrorAndHalt,1,(19|S24:../NdmpBackupManager.cpp|i32:778|S2:25|S24:cannot connect on socket|) 1,51216,134,134,34,1427980890333,122724,139941325879040,0:,0:,36:NdmpBackupManager::UpdateTotalKbytes,4,(24|u64:0|u64:0|u64:0|) 2,51216,134,134,35,1427980890333,122724,139941325879040,0:,0:,0:,2,(32|S22:/vol/DXG16VNAS01_VL01/|) 0,51216,134,134,36,1427980890734,122724,139941325879040,0:,48:Sending EXIT STATUS 25: cannot connect on socket,31:ConnectionToBrm::SendExitStatus,1 1,51216,134,134,37,1427980890734,122724,139941325879040,0:,0:,12:MainShutdown,2,(6|S2:25|u32:122724|) Any help very welcome Thanks SteveSolved3.8KViews0likes6Comments