rman restore failed "no AUTOBACKUP found or specified handle is not a valid copy or piece"
Hi, I want to restore oracle db of my linux server, but it failed. Could anyone help me?? RMAN> startup force nomount Oracle instance started Total System Global Area 17103163392 bytes Fixed Size 2308896 bytes Variable Size 8657044704 bytes Database Buffers 8422162432 bytes Redo Buffers 21647360 bytes RMAN> run { allocate channel c1 type 'sbt_tape'; send 'NB_ORA_SERV=qin, NB_ORA_CLIENT=song-db'; restore controlfile from ' /cntrl_14_1_893111594'; release channel c1; } 2> 3> 4> 5> 6> allocated channel: c1 channel c1: SID=582 device type=SBT_TAPE channel c1: Veritas NetBackup for Oracle - Release 7.7 (2015062002) sent command to channel: c1 Starting restore at 15-OCT-15 channel c1: no AUTOBACKUP in 7 days found released channel: c1 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of restore command at 10/15/2015 11:14:48 RMAN-06172: no AUTOBACKUP found or specified handle is not a valid copy or piece RMAN>Solved28KViews0likes5CommentsNetbackup restore failed - Restore error(2850)
Good day Guys, I am fairly new to Netbackup. Recently joined a company that uses it for it's backups. So far, all the problems I have experienced, I was able to find solutions for in these forums, but today I have one I am unable to solve. Background info: Server OS: MS Server 2008 R2 Ent 64bit Netbackup 7.6.0.4 Dell PowerVault TL2000 LTO5 Media tapes Senario: I did a full backup on a file server, which was also the media server to 2 tapes. I uninstalled netbackup from that server, as it is being decom-ed and didn't backup any settings for netbackup or even the catalog, which apperantly was done to the server's HDD, instead to tape. This server was then renamed to a new name and I did a BMR restore to a VM of the "old" server. Now I need to restore that complete backup to a 3rd server, which has enough disk space, over the network. The restore was started from the VM server and job is being monitored on the renamed server, where netbackup was re-installed. This is not the first problem I have run into with the restore, but I think most settings are correct now on Netbackup. Original server: ZAALIOSRV033 (Was media server, now VM with netbackup client) Renamed server: ZAALIOSRV001 (New media server, with NB Admin Console) Network server: ZAAAPJSRV001 (Server with the disk space) Error I am getting: 7/6/2015 7:40:03 AM - begin Restore 7/6/2015 7:41:05 AM - 1 images required 7/6/2015 7:41:05 AM - media 0048L5 required 7/6/2015 7:41:05 AM - media 0077L5 required 7/6/2015 7:41:06 AM - restoring image zaaliosrv033.zaa.xstrata.int_1434000278 7/6/2015 7:41:07 AM - Info bpbrm(pid=6036) zaaliosrv033.zaa.xstrata.int is the host to restore to 7/6/2015 7:41:07 AM - Info bpbrm(pid=6036) telling media manager to start restore on client 7/6/2015 7:41:10 AM - Info bpbrm(pid=4992) zaaliosrv033.zaa.xstrata.int is the host to restore to 7/6/2015 7:41:10 AM - connecting 7/6/2015 7:41:10 AM - requesting resource 0077L5 7/6/2015 7:41:10 AM - granted resource 0077L5 7/6/2015 7:41:10 AM - granted resource Drive2 7/6/2015 7:41:11 AM - Info bptm(pid=1912) Waiting for mount of media id 0077L5 (copy 1) on server zaaliosrv001.zaa.xstrata.int. 7/6/2015 7:41:11 AM - started process bptm (1912) 7/6/2015 7:41:11 AM - mounting 0077L5 7/6/2015 7:41:12 AM - Info bpbrm(pid=4992) start tar32 on client 7/6/2015 7:41:12 AM - Info bptm(pid=1912) INF - Waiting for mount of media id 0077L5 on server zaaliosrv001.zaa.xstrata.int for reading. 7/6/2015 7:41:16 AM - Info tar32(pid=3620) Restore started. 7/6/2015 7:41:16 AM - connected; connect time: 0:00:06 7/6/2015 7:41:53 AM - mounted; mount time: 0:00:42 7/6/2015 7:41:53 AM - Info bptm(pid=1912) 0077L5 7/6/2015 7:41:55 AM - Info bptm(pid=1912) INF - Waiting for positioning of media id 0077L5 on server zaaliosrv001.zaa.xstrata.int for reading. 7/6/2015 7:41:55 AM - positioning 0077L5 to file 789 7/6/2015 7:42:26 AM - positioned 0077L5; position time: 0:00:31 7/6/2015 7:42:41 AM - begin reading 7/6/2015 7:43:15 AM - positioning 0077L5 to file 790 7/6/2015 7:43:15 AM - positioned 0077L5; position time: 0:00:00 7/6/2015 7:43:36 AM - Info tar32(pid=3620) done. status: 0 7/6/2015 7:43:36 AM - Info tar32(pid=3620) done. status: 5 - the restore failed to recover the requested files 7/6/2015 7:43:36 AM - Info bpbrm(pid=6036) child done, status 5 7/6/2015 7:43:36 AM - Info bpbrm(pid=6036) sending message to media manager: STOP RESTORE zaaliosrv033.zaa.xstrata.int_1434000278 7/6/2015 7:43:36 AM - end reading; read time: 0:00:55 7/6/2015 7:43:37 AM - Info bpbrm(pid=6036) media manager for backup id zaaliosrv033.zaa.xstrata.int_1434000278 exited with status 0: the requested operation was successfully completed 7/6/2015 7:43:37 AM - restored image zaaliosrv033.zaa.xstrata.int_1434000278 - (the restore failed to recover the requested files(5)); restore time 0:02:31 7/6/2015 7:43:42 AM - end Restore; elapsed time: 0:03:39 Restore error(2850) I have checked, and there is no FORCE_RESTORE_MEDIA_SERVER entry in the registry. Please help. :)Solved15KViews0likes6CommentsERROR: client is not validated to perform the requested operation
hello, i get this error when trying to restore from a hyper-v VM which has the netbackup client installed. in the hyper-v policy i have 3 clients (selected by hostname) and only one of them exhibits this error. output of bpclntcmd on the culprit machine: C:\Program Files\VERITAS\NetBackup\bin>bpclntcmd -self gethostname() returned: HOSTNAME host HOSTNAME: hostname.dom.corp.net at xx.xxx.xx.xxx aliases: hostname.dom.corp.net HOSTNAME xx.xxx.xx.xxx getfqdn(HOSTNAME) returned: hostname.dom.corp.net C:\Program Files\VERITAS\NetBackup\bin>bpclntcmd -pn expecting response from server masterserver.hki.com hostname.gt.es *NULL* xx.xxx.xx.xxx 3005 any thoughts? thanksSolved13KViews1like7CommentsMIssing PATH: for drives
I ahve a LINUX Media server, and the drive path when i run a tpconfig shows missing. How do I get NB to see the paths once again? Enter option: Id DriveName Type Residence Drive Path Status **************************************************************************** 1 Sep1-71 hcart2 TLD(3) DRIVE=71 MISSING_PATH:4:0:0:2:SG11029122 DOWN 2 Sep1-70 hcart2 TLD(3) DRIVE=70 MISSING_PATH:4:0:0:1:SG11029121 DOWN 3 Sep1-84 hcart2 TLD(3) DRIVE=84 MISSING_PATH:2:0:0:3:SG11029135 UP 4 Sep1-83 hcart2 TLD(3) DRIVE=83 MISSING_PATH:2:0:0:2:SG11029134 UP 5 Sep1-82 hcart2 TLD(3) DRIVE=82 MISSING_PATH:2:0:0:1:SG11029133 DOWN 6 Sep1-69 hcart2 TLD(3) DRIVE=69 MISSING_PATH:4:0:0:0:SG11029120 DOWN 7 Sep1-81 hcart2 TLD(3) DRIVE=81 MISSING_PATH:2:0:0:0:SG11029132 DOWN Currently defined robotics are: TLD(3) robot control host = nbuf1a EMM Server = nbuf1aSolved12KViews1like6CommentsSteps to configure a client
i want to configure a client at netbackup level. Please correct if i am wrong. for Unix client 1)install the OS 2)we can ask network team to provide an IP and regestering the client in DNS server. Once regerstation done will get the FQDN to our system. 3)we will install netbackup client server software in the machine, it will ask licence key, master, media server names while installing and once installation done 4)we need to add client entries in master server bp.conf , etc/host file. 5)now will chek for the connectivity using ping, telnet and nslookup commands, Once the connectivity is fine will configure the server as netbackup client. For windows client. 1)install the OS 2)we can ask network team to provide an IP and regestering the client in DNS server. Once regerstation done will get the FQDN to our system. 3)we will install netbackup client server software in the machine, it will ask licence key, master, media server names while installing and once installation done 4)Need to add master, media server entries in registry HKEY_LOCAL_MACHINE\Software\VERITAS\NetBackup\CurrentVersion\Config\Server 5)now will chek for the connectivity using ping, telnet and nslookup commands, Once the connectivity is fine will configure the server as netbackup client. EXPERTS... Please let me know if i am wrong/missed anything at any where or if am correct please give me some more detailed text.Solved12KViews1like3CommentsVirtual Machines going out of network during snapshot backup
Has anyone experienced the Virtual machines going out of network during the backup using "VMware" policy. Apparently , the Windows VMs losing connectivity for a little while and coming back online and the Linux VMs becoming unresponsive.Solved12KViews1like7CommentsNetbackup Vmware backup error 11 system called failed
Hello All, I would like to ask for a suggestion. I am facing with a backup error on vmware. I am backing up 400 VMs but when i try to backup some of them i got the error 11 system call failed. I have read lots of posts but none of them help me to solve this problem. I am backing up over SAN. I have review the netbackup logs and i have identify this. BPBKAR on the backup host ( Master/Media server on linux). 16:24:18.663 [31487] <4> bpbkar: INF - Snapshot mapping type: ON 16:24:18.664 [31487] <4> bpbkar: INF - Snapshot BLIB type: OFF 16:24:39.730 [31487] <4> bpbkar: INF - Found 3 virtual volume(s) 16:37:51.298 [31487] <8> bpbkar: FTL - cleanup() failed, status 11 16:37:51.324 [31487] <16> bpbkar: ERR - bpbkar FATAL exit status = 11: system call failed 16:37:51.324 [31487] <4> bpbkar: INF - EXIT STATUS 11: system call failed 16:37:51.329 [31487] <4> bpbkar: INF - setenv FINISHED=0 [netbackup@S01NETAGNPN01 bpbkar]$ BMRBM on the backup host ( Master/Media server on linux). 16:37:51.298 [31481] <32> bpbrm main: from client S01ANTVIRPN01: FTL - cleanup() failed, status 11 16:37:51.298 [31481] <2> set_job_details: Tfile (50851): LOG 1431380271 32 bpbrm 31481 from client S01ANTVIRPN01: FTL - cleanup() failed, status 11 16:37:51.298 [31481] <2> send_job_file: job ID 50851, ftype = 3 msg len = 91, msg = LOG 1431380271 32 bpbrm 31481 from client S01ANTVIRPN01: FTL - cleanup() failed, status 11 16:37:51.299 [31481] <4> db_error_add_to_file: from client S01ANTVIRPN01: FTL - cleanup() failed, status 11 16:37:51.324 [31481] <2> bpbrm main: client S01ANTVIRPN01 EXIT STATUS = 11: system call failed VxMS on the backup host ( Master/Media server on linux). Begin VxMS Session... Logmask set to 0x04000000 Current Environment Variables VFM_ROOT = /usr/openv VFM_PRIVATE_ROOT = /usr/openv VFM_MAP_API_LIB = NULL VFM_MAP_DIR = NULL VFM_UTIL_LIB = NULL 05/11/2015 15:59:57 : getIndexFromPath:RvpNtfsFileSystem.cpp:2401 <ERROR> : Bytes transferred = 0 05/11/2015 15:59:57 : readRegistry:RvpNtfsFileSystem.cpp:1918 <ERROR> : Index for registry not found 05/11/2015 15:59:57 : resolveVolumesFromNtfs:RvpFileSystemMgr.cpp:2660 <ERROR> : Reading mounted devices from regirstry failed 05/11/2015 16:13:51 : writeData:RvpFile.cpp:310 <ERROR> : Returning: 28 05/11/2015 16:13:51 : readFileDataIntoTempFile:RvpNtfsFileSystem.cpp:2025 <ERROR> : Execption: VERIFY_LINUX 05/11/2015 16:13:51 : openId:RvpFileSystemMgr.cpp:3551 <ERROR> : Invalid NTFS object 05/11/2015 16:13:51 : openId:RvpFileSystemMgr.cpp:3619 <ERROR> : Returning: 3 05/11/2015 16:13:51 : rvpMapOpenId:RvpCoordinator.cpp:692 <ERROR> : Returning: 3 05/11/2015 16:13:51 : rvp_map_open_id:rvpntfs.cpp:570 <ERROR> : Returning: 3 05/11/2015 16:13:51 : openId:RvpObject.cpp:195 <ERROR> : Returning: 3 05/11/2015 16:13:51 : openVolume:VixGuest.cpp:3168 <ERROR> : Returning: 3 05/11/2015 16:13:51 : openVolume:VixManager.cpp:511 <ERROR> : Returning: 3 05/11/2015 16:13:51 : openId:VixManager.cpp:361 <ERROR> : Returning: 3 05/11/2015 16:13:51 : vixMapOpenId:VixCoordinator.cpp:1027 <ERROR> : Returning: 3 05/11/2015 16:13:51 : vix_map_open_id:libvix.cpp:1314 <ERROR> : Returning: 39KViews1like8CommentsHow to restore SAP HANA database to different client with different db name
Hi All, I am trying to restore an SAP HANA database ABC on client1 to database DEF on client2. I can restore ABC to ABC on client1 without any issue. But when I try to restore ABC on client1 to DEF on client2, I am getting "No data backup found" error in SAP HANA Studio. Did anyone do this kind of restore? Netbackup version: 7.7 Regards.Solved8.9KViews0likes10CommentsPUSH NETBACKUP CLIENT INSTALL ON WINDOWS
Hello every one. Can any explain with possible pictures or print screens on how to push or remotely install netbackup clients on windows. I am pretty new to netbackup windows environment. I can do this in UNIX and Linux. Thank you.Solved7.5KViews1like5Comments