Restore

3417 Topics

Restore not working
Hello, I have a backup stored on disk of a WinServer 2019 VM that I am trying to restore; however, when i alter the VMs current state (ex add a new program, add a file, etc) and then restore to the backup point - the new "changes" i made are not wiped away. Even though the restore shows successful, I dont believe that it is if my current VM state (files, programs, etc) arent restore to what they were at the time of the backup. Ive tried overwriting and restoring files/volumes both from Files, folders or volumes as well as Complete online restore options, but have not seen what I want to see. Any ideas?
RStamp01
11 months ago Place Backup Exec
525Views
0likes
2Comments
Catalogue jobs failed - data inconsistent on each tape?? V-79-57344-33994
Hello, i haveto restore an old backup (created with backup exec 10 i guess). For this restore i use Backup Exec 2010 R3 on Server 2008 R2. There are no entries for this backup in the catalog. So i loaded all tapes for this backup (20x LTO4 containing one backup) in my 24-Slot loader and inventorized them. After that i created catalogue jobs for each tape, starting with the first one. After 2 hours and about 800gb data the job on tape 1 failed with the error (translated): V-79-57344-33994 - Data read from media is not consistent. All other tapes failed with the same error. I can browse the data of the first tape and restore some of the items (others have a red cross). All other tapes are not in the catalogue, so i cant browse them. What i tried: * cleaning drive * checking statistic data for all tapes (0 errors) * Under BE Options > catalogue > disabled request all media in a row (translated) * enabled debugging May the first tape be broken? Is there a possibility to check the contents of all other tapes? I'm doing something wrong? Thanks for your help Andreas Debugging log for a catalogue job: [...] skipped loading tape [0984] 11/19/13 12:22:37 [tpfmt] - Current media tape header was written by "NetVault Domain". [0984] 11/19/13 12:22:37 [tpfmt] - OSF: Got tape one during slow cat. Continuing = false. [0984] 11/19/13 12:22:37 [tpfmt] - TpRead( ): [0984] 11/19/13 12:22:37 [tpfmt] - Error = 0 Req = 65536 Got = 65536 [0984] 11/19/13 12:22:37 [tpfmt] - ReadThisSet( cur_fmt=0 ) [0984] 11/19/13 12:22:37 [tpfmt] - Set 1 was written by version 1.0. [0984] 11/19/13 12:22:37 [tpfmt] - F40_MoveNextDBLK: Proceed -- Assuming this is a DBLK header, but we were expecting a stream. [0984] 11/19/13 12:22:37 [tpfmt] - Recalculation of LBAs disabled for slow catalog of set. [0984] 11/19/13 12:22:37 [tpfmt] - OSF: Found first or lowest known set. runningBSnum = 1. bset num = 1. Continuing = false. [0984] 11/19/13 12:22:37 [tpfmt] - ReadThisSet() return=0x00000000 [0984] 11/19/13 12:22:37 [tpfmt] - Current VCB: ID = 4cdbeb8b Seq = 1 Set = 1 [0984] 11/19/13 12:22:37 [tpfmt] - PositionAtSet( ): TF Msg = b [0984] 11/19/13 12:22:37 [tpfmt] - UI Msg = 8002 [0984] 11/19/13 12:22:37 [tpfmt] - HARDWARE COMPRESSION ===> Compression is configurable. [0984] 11/19/13 12:22:37 [tpfmt] - HARDWARE ENCRYPTION ===> Encryption is supported. [0984] 11/19/13 12:22:37 [tpfmt] - GET_DRV_INF: bsize = 32768 [0984] 11/19/13 12:22:37 [tpfmt] - GET_DRV_INF: preferredBlockSize = 65536 [0984] 11/19/13 12:22:37 [tpfmt] - End of TF_OpenSet: Ret_val = 0x00000000 Buffs = 10 HiWater = 0 [0984] 11/19/13 12:22:37 [tpfmt] - TF read xfer time = 0 seconds. [0984] 11/19/13 12:22:37 [tpfmt] - AbortRead( ) [0984] 11/19/13 12:22:37 [tpfmt] - TF_CloseSet [0984] 11/19/13 12:22:37 [tpfmt] - TF_OpenSet( ) [0984] 11/19/13 12:22:37 [tpfmt] - Requested Set: ID = 4cdbeb8b Seq = 1 Set = 2 [0984] 11/19/13 12:22:37 [tpfmt] - Current VCB: ID = 4cdbeb8b Seq = 1 Set = 1 [0984] 11/19/13 12:22:37 [tpfmt] - GotoBckUpSet( desired=2, this=1 ) [0984] 11/19/13 12:22:37 [tpfmt] - state 0, 1 sets to go [0984] 11/19/13 12:22:37 [tpfmt] - state 1, 1 sets to go [0984] 11/19/13 12:22:37 [tpfmt] - MoveNextSet( cur_fmt=0 ) [0984] 11/19/13 12:22:37 [tpfmt] - MoveFileMarks( 1 ) [0984] 11/19/13 12:22:37 [tpfmt] - TpReadEndSet( ): [0744] 11/19/13 12:22:38 [server] - Updating status for: 'Katalogisieren 00031' (0x8 0x0) [0744] 11/19/13 12:22:38 [server] - Status for: 'Katalogisieren 00031' updated [0984] 11/19/13 12:23:16 [tpfmt] - MoveFileMarks( ) return=0x00000000 [0984] 11/19/13 12:23:16 [tpfmt] - MoveNextSet() return=0xE00084CA [0984] 11/19/13 12:23:16 [tpfmt] - GotoBckUpSet( ) return=0xE00084CA [0984] 11/19/13 12:23:16 [tpfmt] - FreeFormatEnv( cur_fmt=0 ) [0984] 11/19/13 12:23:16 [tpfmt] - End of TF_OpenSet: Ret_val = 0xE00084CA Buffs = 10 HiWater = 0 [0984] 11/19/13 12:23:16 [tpfmt] - TF_CloseSet [0984] 11/19/13 12:23:16 [tpfmt] - Error detected [0984] 11/19/13 12:23:16 [tpfmt] - FreeFormatEnv( cur_fmt=65535 ) [0984] 11/19/13 12:23:16 [tpfmt] - Setting rewind flag to true for older device. This will likely degrade the performance of the current job. [...] skipped unloading tape
Solved
AndreasK
2 years ago Place Backup Exec
2.4KViews
0likes
4Comments
SDR failed to connect to backup server
Hi, our backup server is BE 2014 SP1 on Windows Server 2008 R2 SP1. We are trying to restore full system of some clients by using SDR. However, after we boot the client to recover with the SDR boot CD, when it asksfor connections to the backup server, although we put in the correct username and password, it always says it cannot connect to the backup server. Both the backup server and clients are in WORKGROUP. There is no domain in this network. Have anyone encountered this issue before? Any advice? Thanks in advance.
Solved
liuyang
3 years ago Place Backup Exec
2.4KViews
0likes
9Comments
BUE 21.4 & GRT with Exchange 2016 on Server 2019
New server with Windows 2019 Standard install, clean install of BUE 21.4 (will attempt using the Veritas BUE Migration Assistant to bring over catalogs, etc.) and questions regarding restoring GRT-enabled Exchange 2016 mailboxes/emails. I guess the biggest question is what are the requirements for the above scenario? Is Exchange Management Tools still required for GRT mailbox restores like it was for Exchange 2010? The system requirements pages I've found make no mention of Exchange Management Tools so I'm not sure. I do remember in the past when we were running BUE 16, and Exchange 2010 that I had to do some special configuration for GRT restores to work, and it has continued to work after we migrated to Exchange 2016 and updated BUE to our current 21.4.
Bill_Clark22
3 years ago Place Backup Exec
882Views
0likes
1Comment
Cannot view backup sets on restore wizard
After upgrading veritas 21.1 to 21.2 I faced this problem. When I want to restore a database, On restore wizard, I cannot see any files to restore in the selection panel. although backup was successful.
yousef2020
4 years ago Place Backup Exec
1.3KViews
0likes
5Comments
How I can schedule a restore and repeat it weekly?
Hi, Like a backup job this can repeat weekly, daily, monthly, etc. In this case we search the option to schedule a restore job and repeat it. The idea is restore one DB, weekly on sunday. How I can do this? I can't find it in the wizard of restore, you can only restore one time on a day and hour. Regards, Carlos Espinoza
Solved
carlos_espinoza
4 years ago Place Backup Exec
2.9KViews
0likes
9Comments
"Browse Failure" when choosing VMware tools iso
Hello all, any help would be greatly appreciated. I am trying to do a "convert to virtual machine from point in time" in Backup Exec 2012. I almost get throughthe whole setup sucessfully, I point to my ESX/Vcenter and choose a datastore. Now on the final step, i click the browse button beside the "Full path of VMware tools ISO image:" and i get the following error: "Browse Failure Failure to browse "XXXXXXXXXXXXXXXXXXX" The directory or file was not found, or could not be accessed." Now the first thing i'm noticing is it is trying to browse our old domain/FQDN. Is there any way of choose a new browse location?
Solved
louie7600
4 years ago Place Backup Exec
2KViews
4likes
4Comments
Backup Exec 11D - End of Life
Hi Team, My customer needs help in restoring data from Backup Exec 11D, they are one of our oldest client here in the Philippines. They need to restore data in BE 11D however we don't have a link or installer available on downdloads as of today. Any link for BE 11D or any workarounds to restore their data? Thanks, James
edmundtv
5 years ago Place Backup Exec
1.5KViews
0likes
4Comments
V-79-57344-959 - Unable to open the item Database - skipped.
Dear all, We are started to using Backup Exec 2015 to backupExchange 2013 Servers. The backup tasks aresuccess to backup the Mailbox Servers, Databases in the DAG, and alsoCAS Servers. But when we try to restore mail items, the jobs are failed andwe have the following errors in the Job Status: Final error: 0xe0003bf - Cannot open one or more mail messages because of unknown Exchange Web Service errors. in the Errors: V-79-57344-959 - Unable to open the item Database - skipped. V-79-57344-959 - Unable to open the item Database - skipped. V-79-57344-959 - Unable to open the item Test Message @1302- skipped. Any one have encounter the same errors when restore Exchange 2013 mails? Regards & Thx
Andy_Chong
6 years ago Place Backup Exec
2.1KViews
0likes
2Comments
RESTORE: Directory Path
Iam trying to restore an entire backup to a new location... ORIGINAL path: c:\userfiles\our_research\a bunch of subdirectories...etc... INTENDEDNEWLOCATION: f:\a bunch of subdirectories... PROBLEM: whenever Iselect the our_research folder it still restores to the following path: f:\userfiles\our_research\a bunch of subdirectories... how can Ichange this? thanks...
Solved
MSUTech
6 years ago Place Backup Exec
2.8KViews
0likes
10Comments