ApplicationHA on LPAR with VCS and SRDF replication agent
Hello, I am evaluating AppllicationHA in my environment which is composed of LPARs in two frames installed in two separate sites. The LPARs are accesing two EMC storage VMAX and there is a replication link using SRDF. We are not able to use Live Partition Mobility between the two PowerSystem Servers because there is not an storage shared betweem them. For this reason we will like to use a VCS management cluster installed in the frames (one node on each PowerSystem Server) and this VCS cluster is using SRDF replication agent. My question is if we configure applicationHA in this VCS management cluster to protect a LPAR, can this LPAR use the VCS with SRDF agent? Doing so, we will solve our limitation and we will be able to relocate the LPAR to the other frame automatically. Thanks and best regards Osvaldo1.5KViews2likes1Comment
ApplicationHA 6.1, ESXi 5.5 and SQL 2012 problems
Hi all, Just wondering if anyone out there might be able to throw a bit of advice my way. Currently evaluating AppHA on VMWare (AppHA 6.1 and ESXi 5.5 hosts) with the view to buying as on paper it does exactly what we want. I've installed the High Availability Console server which has plugged into vCenter nicely, installed the ApplicationHA agent onto a VM running Windows 2012 DC R2 and SQL 2012, again all going smoothly up to this point. Now I get around to testing the agent out. I'm doing this by stopping the sql server and sql agent services on the VM and waiting for AppHA to kick in and restart both services, this is when I'm getting into a little trouble. Firstly the services do not shut down as cleanly as when the agent is not configured on the VM, a message pops up saying that windows could not stop the SQL server and that the service did not return an error, helpful I know. This does not happen when the agent is not configured on the VM, the services shut down fine. Secondly when the agent is configured and the services finally shut down, the AppHA plugin for the VM in vCenter displays a faulted status and that the SQL server service is not running and that the SQL agent service could not started. AppHA just sits there and does nothing, it does not restart the services as it should do. Now it's probably something I've done during setup but being new to the product I cannot see what, I have followed all the install pdf's and have read them over many times, I just cannot see what I may have done wrong as the setup seems simple enough. Or am I testing the product in the wrong fashion? As I'm only in evaluation mode I have no technical support with Symantec so any help with this would be very much appreciated as we are looking at buying this product and at the moment this is the final piece of the test I need to get working (probably the most important part) before I can turn to the bean counters and ask for some cash. Many Thanks LeeSolved2.4KViews1like2Comments
Unable to integrate guest components on the ApplicationHA console
Environment Two ESXi Servers = Esxi1 and Esxi2 version of Esxi Servers = 5.0 Vcenter OS = Windows2008R2(64bit) SAN = SAN attached on both Esxi Servers HA and DRS = enabled Application HA = 6.0a trial Application HA OS = rhel6.4z (64bit) Hello, i can't deploy a rhel6 ApplicationHA agent directly from the vcenter ApplicationHA Console tab because the package isn't installed. When i wan't to integrate it i can't do it. I think I haven't the correct media to perform this task. On the vcenter OS, i tried to integrate agent guest components D:\Symantec HA\ApplicationHA\Console\installer>CopyInstaller.bat "D:\temp\SYMC_ApplicationHA_6.0a_Linux" Error: Invalid source location. D:\Symantec HA\ApplicationHA\Console\installer>CopyInstaller.bat "D:\temp\VRTS_HA_Agent_Pack_2Q2013_Linux" Error: Invalid source location. I think a dvd2 media/iso is requested but i haven't this one. How to fix it ?Solved1.5KViews0likes1Comment
R12: XML Reports end with WARNING Status, Using Virtual Hostname by Veritas HA
Dear Experts, We are using the Veritas HA cluster to configure our ERP Application on Virtual Hostname. With Release 11i every thing was working fine, We have upgraded our Application from 11.5.10.2 to R12, 12.1.3. Now in the Upgraded Application we are unable to open/view any of the XML based Concurrent Reports. All the XML Concurrent Reports are ending in Status WARNING. When we click on the View Out put, we are just getting the XML code and not the XML based reports. The log file of Out Put Postprocessor shows the following errors: ================================================ 5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] Get Output Type [5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file name: /mnt/oracle/ERPROD/inst/apps/ERPROD_erp-lh-dr/logs/appl/conc/out/o4152834.out [5/28/13 12:40:20 PM] [STATEMENT] [960882:RT4152834] XML file is on node: ERP-LH-DR [5/28/13 12:40:20 PM] [UNEXPECTED] [960882:RT4152834] java.sql.SQLException: Exhausted Resultset at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224) at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127) at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244) at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176) [5/28/13 12:40:20 PM] [960882:RT4152834] Completed post-processing actions for request 4152834. And error like below: The error we are getting from the Application log files are related to Hostname. Following is the abstract from the Output Post Processor log. [5/29/13 2:56:02 PM] [UNEXPECTED] [960900:RT4155505] java.sql.SQLException: Exhausted Resultset at oracle.jdbc.driver.OracleResultSetImpl.getString(OracleResultSetImpl.java:1224) at oracle.apps.fnd.cp.util.CpUtil.getCanonicalLocalNode(CpUtil.java:127) at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:244) at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176) =============================================================== Concurrent Manger Log files shows the following error: =========================================================== --------------------------------------------------------------------------- Executing request completion options... Output file size: 430455 ------------- 1) PUBLISH ------------- Beginning post-processing of request 4158856 on node ERP-LH-DR at 30-MAY-2013 18:53:38. Post-processing of request 4158856 failed at 30-MAY-2013 18:53:38 with the error message: One or more post-processing actions failed. Consult the OPP service log for details. -------------------------------------- ------------- 2) PRINT ------------- Not printing the output of this request because post-processing failed. -------------------------------------- Finished executing request completion options. --------------------------------------------------------------------------- Concurrent request completed ========================================================== Please suggests: 1- Is there any way to make these XML reports work with Veritas HA, using Virtual hostname 2- Can we identify or pin point from where the Out Put Postprocessor is setting the Physical Hostname. Regards Ali Ammar6.6KViews1like6Comments
Unable to configure appha on vmguest after installation.
Hi, I've just finished installing the AppHA guest component on a RHEL 6 platform. However in my AppHA console in the AppHA tab is says "unable to retrieve status of this virtual machine" The log is as follows 18:54:40 UTC+0800: Debug Logs 18:54:40 UTC+0800: requesting application state 18:54:40 UTC+0800: initialized xmlHttpObject 18:54:40 UTC+0800: Requesting Data from /ac/GetVMStatus?&moref=VirtualMachine:vm-341&serverGuid=2C52F0EF-9945-440B-A661-F47C5D0F100F&sessionId=E4187DBD-7224-44E3-81B6-28A5FF8305C1&locale=en_US&serviceUrl=https://10.0.2.220/sdk&webServicesSessionId=1A3983B1BE3B07E317C81C9E58D94396&date=Thu Mar 21 18:54:40 UTC+0800 2013 18:54:42 UTC+0800: IP Address:undefinedConfig Status:undefined Privilege:undefined 18:54:42 UTC+0800: ReturnCode:-1 18:54:42 UTC+0800: Message:None of the IP Address 10.0.2.231 is reachable on port 5634 This suggests to me that it is unable to connect through port 5634. However there is no firewall and I cant for the life of me figure out why it cant connect through 5634.Solved1.3KViews0likes1Comment
On/Off agent or perhaps trigger
Hello, I encountered following problem: my customer's application is integrated in VCS (running on linux) - in one of many service groups (SGs). The application is in VCS implemented via Application agent type of resource - it contains scripts for bringing it online/offline/clean action as well as monitoring. After some time it was found out that the customer does not require and need monitoring and cleaning actions at all. The only thing he expects from VCS is to bring the application resource online (or offline) when the whole SG is going online (offline). I am considering how to achieve this. Is it possible to leave out monitoring and clean action from application resource? Is there any other available type of resource (agent) which could do just this? Or should I look for postonline trigger script? If the option is trigger script I would like to see some example. There will be more such applications running on different nodes. Thanks in advance for your opinions/tips. i.2.1KViews1like8CommentsUnable to configure appha on vmguest after installation. Admin page over port 5634 not accessible
Hi, I am evaluating application HA and got stuck with The installation was successful xprtld is running Port 5634 is open and I can connect from Vcenter server over http://vmguest:5634 However I am not able to see appha details from Vcenter Server vm guest tab It says: Unable to retrieve status of vmware guest machine. On checking 14152 and 14153 ports are not listening on VM guest. What is the service I need to confgure or start to get this port on listen mode in the vmguest? Could somebody please help Thanks in advance HariSolved2.3KViews2likes9Comments
Problem with the Oracle VCS 5.1 resource and DetailMonitor = 1
Hi, I am attempting to configure the DetailMonitor = 1 option of the Oracle resource in a service group but am running into LogonUser failed error messages in the Oracle_A.txt file. The issue is with the user / domain and password I am using and, I assume, the inability of VCS to connect to the installed Oracle database I have specified under SID. In an attempt to check this I have attempted to use my own administration account to get this to work but am having no luck, the account in question does work when running "sqlplus / as sysdba" and I am able to run the sql select * from v$database; query that VCS is attempting to execute on the Oracle database. My first question is does anyone know what command is being run by VCS to connect to the database as its not shown in the log files? My second question is does anyone know what I am doing wrong and what permissions will be required by the account VCS uses as I am in a highly locked down environment so have to work within the security framework. main.cf Oracle XXX_SG-Oracle { ServiceName = OracleServiceXXX DelayAfterOnline = 30 DelayAfterOffline = 30 DetailMonitor = 1 Domain = "xxx.xxx.xxx.xxx" SID = xxx UserName = xxxxxxxxxx EncryptedPasswd = xxxxxxxxxxx SQLFile = "\"C:\\Program Files\\Veritas\\Cluster Server\\bin\\Oracle\\Check.sql\"" SQLTimeOut = 30 } It should be noted that the resource will work fine with the DetailMonitor = 0. Help :) Regards, PaulSolved1.5KViews0likes4CommentsShould all monitored services be restarted if one service stops?
During implementation of AppHA where the agent is monitoring several services in the same guest we have noticed that if one service stops, the agent will try to restart all services monitored. Is this "by design" or have we done something wrong while configuring the GenericService agent? /ASolved989Views0likes2Comments