Netbackup exluding many folders form backup
Hello Team, Thanks in advance for all your help. I have Netbackup server and from it we are taking file server backup. During restoring of files, we found many files and folders are not backuped up with Netbackup. After analyzing, I found issue with NTFS permission. I have one Security groups which dont have access to that folders which I have used for backup. Now thing is I have many file servers and I dont have any details on which folder this group dont have permission. So looking for detailed backup report from Netbackup where files are folder are not included in backup due to permission issues. Please help on this. Regards, Yogesh Makwana959Views0likes3CommentsANY MATERIALS FOR A FRESHER TO CRACK THE CERTIFICATION EXAM
Hi, i am fresher going to da certification on Netbackup tool. please give me any suggestions as : 1) which certification will help me a lot to work on Netbackup all kinds of services. 2) materials which can be helpful for cracking the exam other than the guides provided by the website. 3) what should i do to be more competent enough to handle all the situations in the environment while dealing with this tool. Regards, vinay saiSolved1.4KViews0likes2CommentsDuplication of Backup sets to be scheduled
Hello all, I am trying to find a way in BE 2014, how to schedule duplication of backup sets. I am duplicating one server (backup set) this way: https://www.veritas.com/support/en_US/article.HOWTO98918 I have about 10 servers and I need to create monthly backup, which should consists of last full backup set of all servers backuped to Virtual disk (a link above is working only under 1 server). Only one possible solution how to backup month tapes is duplication backup sets for me. I do not want to do it manually each month, is it somewhere possible to create automatically? Thank you, RobertSolved1.5KViews0likes3CommentsOracle backup job failed - Unexpected error - E0001005
Hello, I do have a difficulty backing up the Oracle Instance. It was working fine for more than a month, but it started to fail a few weeks back. We are using Symantec Backup Exec Applicance - Symantec Backup Exec 2014 on Windows 2008 R2 server. All credentials tested and OK. I went through the recommened Oracle Agent setup on Windows server, but I am still getting the following error message: Unfortunatelly no RMAN log attached to the backup job log. Thank you in advance for any information on this. VladimirSolved1.4KViews0likes2CommentsAbout shrinking the catalogs
Hi all, For my 3600 appliance, I've been backing up the catalogs (D:\BackupExec\Catalogs) regularly by burning the whole folder into a DVD. For a pretty long while since use, it's been good and remained at around 3.5 GB. However, in the last month, it's grown substantially and reached 4.9GB now. Any reason why it has expanded so much? Is there a way to shrink it so that I can burn it into a single disc successfully? Thanks, JoeSolved1.1KViews1like4CommentsPureDisk used capacity Mismatch between two servers
I have server 22 and sever 24, both servers have the same disk pool usable size which is 50,471,198.73 but server 22 disk pool used capactity is 38,265,560.96 with percentage disk pool usage at 75.82 and server 24 used capacity is 34,230,007.16. with percentage disk pool usage at 67.82. I called netbackup and there are no orphaned deduplicated Images and his suggestion was to run an images on disk report (which I have running now) and find the odd images. I was just wondering if anyone else may have came accross an issue like this be before or if anyone have any good ideas. I attatched a copy of the Disk pool utilization and capacity report from the netbackup appliances. Thank you in advance.576Views0likes1CommentDeduplication when using SQL Server backup compression
A quick question about using NetBackup with compressed SQL Server backups. Our backups infrastructure consists of NetBackup v7.6 and NetBackup 5230 appliances. Our SQL server estate is a mixture of SQL Server versions 2005-2012 on Windows 2003-2012. We've noticed that the deduplication ratio (as reported by backup jobs in Netbackup Activity Monitor) for compressed SQL backups is 0% (we experimented with the NetBackup SQL Agent and also standard flat file backups). Now we weren't expecting to get much deduplication out of a compressed SQL Server backup - but it was a suprise to get nothing at all. Previous tests performed on other deduplication platforms (Exagrid and Windows native 2012 deduplication) showed that a noticeable (albeit much lower rate compared with uncompressed backups) deduplication level of about 4:1 was possible with compressed SQL Server backups. So my question is - is this a configuration issue on our NetBackup infrastructure - or is there a technical\design reason why the deduplication of compressed SQL Server backups is not available in NetBackup? Regards TerrySolved4.7KViews0likes3CommentsAny dependency on upgrading to BEA 3600 R4 (latest) from R2 (2012)?
Hello, Our appliance is on 2012 R2 (pretty old). As R4 is out recently, I'd like to know if there is any dependency concerning the upgrade, e.g. R2 -> R3 -> R4, or R2 -> R4? Seamlessly as well? Also, anyone could kindly point me to the official upgrade procedure? Thanks a lot!Solved621Views0likes1CommentWann erscheint die nächste Version von Symantec System Recovery?
Hallo, ich spiele zur Zeit mit dem Gedanken für zu Hause eine Lizenz von Symantec System Recovery 2013 R2 zu kaufen. Da das Produkt ja aus dem Jare 2013 stammt und ich es nicht eilig habe, wollte ich fragen, ob es sich eventuell lohnt, auf die nächste Version zu warten. In welchem Zyklus wird SSR veröffentlicht? Wann ist mit einem Nachfolger zu rechnen? Freundliche Grüße Marius KümmelSolved1.2KViews0likes7CommentsNeed to know the commandline to change single user profile in symantec netbackup DLO
Hello , Am using DLO netbackup 6.1 mp6 (i know this is out dated but expecting some support on this as we are in planning to migrate to 7.6). I wanted to know if there is a command line to change single user's profile. For Example: Doing it in GUI is open the console, click on setup tab, click on users folder, select the user (for who you want to change the profile), right click on the user and go to properties, at the profile dropdown select the different profile and click on. This is want i wanted to do with in the command line. Reason of not using GUI: Clicking on users folder under setup tab console crashes. Appreciate your help on this. thanks.445Views0likes2Comments