Network Storage Location is Read only and is not a valid destination
We are running System Recovery 21 and attempting to migrate our backups from the cloud to an on premise storage server appliance. I have done this for 11 other systems without an issue, 2 weeks ago. Today, I have tried on multiple systems and I get the following error every time. This error happens after entering the network credentials and licking "Next" in the Backup Wizard: -Error E1AD4191: \\*server name*\*system name*\ is a read-only location and is not a valid destination. --Error E7D1001D: Unable to open '//*server name*/*system name*/Destination_Location_Test_File'. Error EBAB03F1: Following Operating System error occurred while performing requested operation: 'Access is denied.' Error E7D10049: Device *system name* appears to be offline, disconnected, or otherwise unavailable. Things I have tried to no avail: Verified target folder permissions and sharing settings Created a new folder on the server and pointed to that (same error) Restarted the backup appliance server Used a different account to authenticate in the Backup Wizard Restarted the PC I am trying to backup Ran Veritas as admin in different ways Tried this same process on other PC's that also need their backup destination changed Entered the server IP as the target instead of the name Verified I can access the storage location via file explorer and can create files within the target backup location Can ping the backup appliance by name and IP1KViews0likes1CommentVeeam Backup 11a and Enterprise Vault 14.1
I have been backing up Enterprise Vault using Veeam Backup and Replication for years. Recently, my pre and post scripts to set and clear the backup mode stopped working. Access is denied (Event ID 7046) events are being written to the event log. Any idea why this may be occurring? Unable to set Vault Store Backup Mode. Reason:Access is denied. (0x80070005)1.7KViews0likes2Commentsbackupexecmanagementservice.exe consumes all available RAM
I have a recent problem starting to occur on Backup Exec 2016. The Backupexec Management Service starts consuming all the RAM, then it fills the pagefile.sys which consumes all capacity on my C drive. The service normally runs at @100k RAM, but when this apparent memory leak occurs, it consumes all 24GB RAM, plus all my pagefile. Has anyone else experienced this error and what was the fix please? Any help much appeciated!Solved3KViews0likes6CommentsDeleting the file from the archive if the backup is completed
Dear Experts! Our customer is using EV 12.04 with FSA archiving. We are backing up the EV server with Veeam. The customer has the following expectations: - if we delete the placeholder file on the file server, it should delete in the future from archive too. (ok, it is ok, we can implement that) - if the backup is completed ev can really delete the files from the archive. (empty the trashcan or similar) (it is a problem) I found one site setting, which can control how many days should keep the deleted files in the archive.But it is a simple time setting which is not related to the backup. Question: ---------- - It is possible to implement this expectation? - If it is possible, how can we implement that expectation? Thanks a lot! BR: Paul912Views0likes2CommentsSlow backup to tape
Hi, We're having some trouble backing up virtual and physical servers to tape. We're not getting the speed it should get and it takes up a lot of time to back up the environment. 2,63TB of data takes up more than 24 hours. Information about job, tape & tape drive: Tape type: HPE LTO Ultrium 6 6,25TB MP RW Tape Drive: MSL 2024 Compression: Hardware Encryption: None Verify: Yes These backups are going through the internal network within the domain. The average backup speed is 4,300MB/m (which is way to slow) When we backup locally on the backup server (for example the D:\ drive where the incremental disk backups are saved on the backup server) it gets to a speed of 10500MB/m. Which is understandable considering it's a straight connection to the tape drive. What did we do to try and resolve it: * Checked the compression * Checked encryption * Replaced tapes for new tapes * Resetted the tape drive * Updated Tapedrive firmware * Checked out the network for inconsistencies (not found), file transfers via other apps around 126mbs from server to server) * Job from VM on hyper-visor to tape (around 2,900 MB/m) * Local disk to tape (between 10500MB/M and 13500MB/M) * VM to disk on the backup server (Around 6200MB/M) Help would be appreciated.1.9KViews0likes2CommentsDuplicate Jobs
Hi, I have a question that might not be easy to explain but I'll give it a try. I have some tapes from specific media sets that are shortly used because the backups spreaded amongst them and I would like to free some of those tapes by creating duplicate jobs that would concentrate the backup sets on only a few tapes. My question is, if I duplicate a media set that is spreaded across two tapes into another one, will it copy only the backup set I chose from a specific tape or will it copy the begining of that backup set that was written in another tape too? Because if that happens, I'll end up having duplicate data and I don't want that, I just want to free som tapes that have little data written on them, like the end of a backup set, so I can use them on other media sets I have for new backups. Hope I made myself clear. Thanks!Solved2.8KViews0likes6CommentsBackup exec 2016 & Dell Compellent
Is there a way to backup Dell Compellent volumes, directly i did hear a while ago that you could do this by copying/mounting the volume/snapshot to the backup server and backing it up from there, i think it is all powershell scripting but wouldnt knwo where to start.1.5KViews0likes2CommentsAWS Tape Gateway Wiping Tapes
We are currently playing with Backup Exec & the AWS Tape Gateway to backup to VTL in S3/Glacier. We have an issue where backups are failing and also where once a week (sometimes every other week) when one backup job begins, it first wipes all tapes. Has anyone seen this before?441Views0likes0Comments