LTO5 tape is showing incorrect capacity
Hi There, I'm new to this forum, I use Backup Exec 2010 with an IBM LTO5 tape drive and we have three tapes that are showing a capacity of 35.4gb. If I try to use them it does indeed become full after 35.4gb. I've tried a full erase and everything I can think of and they're stuck at this capacity. I know it's only 3 tapes, not the end of the world... But I'm really curious as to what has happened to them. They weren't new, I think they came with the drive and had been opened. Any insight greatly appreciated!987Views0likes6Comments
SSR 2013 - ReFS support, when?
When is SSR 2013 Server Edition going to support volumes formatted as ReFS for full/incremental recovery points? BTW the discussion creation form doesn't include "Windows Server 2012" in the dropdown list of Operating systems, only Server 2003 and 2008 is there.478Views0likes4CommentsThe job failed with the following error
We have updated BackupExec from 2012 to 2014 and all job are running fine but on a few backup jobs i am receiving following error. In one job i am receiving following error.. Completed status: Failed Final error: 0xe000942a - Backup Exec did not find any resources to include in the backup. Check the backup selections for this job to make sure it includes resources that are available for backup. Final error category: System Errors For additional information regarding this error refer to link V-79-57344-37930 and another job is failing with following error: Completed status: Failed Final error: 0x2000fe07 - FS_NO_MORE Final error category: For additional information regarding this error refer to link V-79-8192-65031 Please help me out in this...Solved5.4KViews3likes3Comments
Backup Exec 2010 Error "There is not enough disk space"
Hello I am running Backup Exec 2010 R3 on Windows Server 2003 R2. For the past 2 weeks, I've had the following repeated failure message on some backup jobs: Storage device "Windows Full" reported an error on a request to write data to media. Error reported: There is not enough space on the disk. V-79-57344-34034 - An attempt to write data past the end of the media has failed. This and a few other backup jobs are backing up to a 1 TB local disk on the same server on which Backup Exec is running. These backup jobs have been running successfully for the last few years but now lately the backup disk is becoming full and some jobs are failing. No configuration changes have been made. I do see that backups from a 3 or 4 days ago are still present. By deleting them, the jobs continue. I must add that all of these backup jobs were created about 4 years ago by my predecessor and I have newly taken over these responsibilities. Backup Exec is very new to me and I have a few questions: 1. I would assume that the backup jobs where the data is written to hard disk are configured such that older backed files are purged automatically: is this correct? How do I determine this in the backup job's setup? 2. I have checked the Job Setup for each of the different backup jobs and I cannot see anything which indicates that a particular backup job is backing up to a hard disk instead of to a tape. How do I determine whether data is being backed up to hard disk or to tape? 3. I think that Catalogs are part of the backup process to hard disk process. I see that there are files in the ...\Program Files\Symantec\Backup Exec\Catalogs\BackUpServer folder dating back to 2009. Are these old files necessary? I would think that Backup Exec would automatically purge old unnecessary catalog files: is this correct, or do they need to be purged manually? Or should they not be purged at all? Thank you for your help. Yes, I know I need to read the user guide but it's over 1200 pages long and I need to get this issue resolved before I focus on training. Best regards, SuzanSolved1.8KViews1like4Comments
VCS stop and service group offline quesiton
I have a quick question regarding service group offline. We only want to bring up/down services when we execute hagrp -online/-offline manually. When VCS shutdown, we don't want to bring up the service offline. I know if we freeze it won't go to offline entry. Do we have any other option? For an exmaple, for only we can disable the autostart. Do we have any thing for offline?Solved3.6KViews0likes2Comments
Backup SQL Server with SQL Agent
Hi, i want to backup my MS SQL Server 2005 with my BE 11d. The BE SQL Agent is installed an the BE RemoteAgent too. When the BE Job runs to the SQL Server, the RemoteAgent stops and the SQL Debugger popup to the Screen. When i close this popup the BE Job runs to the end, but the SQL Databases are not backuped!! What can i do, to backup my databases?? Thanks JBR729Views0likes2Comments
A snapshot operation required by this job was unsuccessful
Hi folks Got a minor issue that's a little confusing. We're running Backup Exec v12 and have a daily backup that includes flat files, SQL databases and Exchange w/ GRT and AOFO enabled. Each day the backup completes successfully with exceptions. The email notification is as follows: (Server: "<servername>") (Job: "Daily Backup") The job completed successfully. However, the following conditions were encountered: <#> files were skipped. A snapshot operation required by this job was unsuccessful. Check the job log and the Windows Event Viewer for additional information. Note: The backup job was configured to use the Advanced Open File Option. However, files were skipped during backup processing. Please ensure that the Media Server <servername> is properly licensed with the Advanced Open File Option, or that the job is properly targeted for media servers that are licensed with the Advanced Open File Option. If I double click on the Job History entry, a Job History tab opens - there's no Job Log tab - and therefore there's no details on the skipped files, snapshot issue, or AOFO licensing problem. Furthermore, there's nothing in the Windows Event Viewer that's relevant; the only entry has what is already detailed in the email notification. Correct me if I'm wrong, but there really shouldn't be having any AOFO licensing prompts, as it's included in Backup 12, and shouldn't there be a Job Log tab in the Job History dialog? Any help anyone can offer would be appreciated. Cheers, Georgia Message Edited by Georgia on 05-09-2008 08:48 PM3.3KViews0likes5Comments
how to create Dedupe Storage Locations using DLO
Hello, we installed the DLO administrator and dedup server on same Machine as mentioned in below link , page no.24 , option no.2. http://kbdownload.symantec.com/resources/sites/BUSINESS/content/live/DOCUMENTATION/6000/DOC6413/en_US/DLOAdminGuide_EN.pdf?__gda__=1404364409_85ff45cfe8c9e0a12e942d3422786b6d 1) We create a profile with dedup enable 2) click dedup server --> manage --> create a storage pool . 3) now trying to create a dedup storage location , I am trying to give path but it is failed to taken. How to give the path when we CREATE file system on secondary storage with CIFS share ??? I am also trying to give local path but it is also failed.Solved5.7KViews1like11CommentsAvoid Exception Error "Remote Agent not detected" when using NAS as clients
Hi, Server: Backup Exec 2012 Client: NAS Box Issue: Successful completion with Exceptions "Remote Agent Not Detected" In our environment, we are taking backups successfully from NAS boxes. But after the sucessfull completion of the Backup job, there are errors thrown with Exceptions as "Remote Agent not detected". Knowing that the NAS boxes added as a client of File Server Type, which does not have remote agent, why is it checking for a remote Agent, and how to avoid this Exception.Solved2.6KViews0likes4Comments
LTO5 tape is showing incorrect capacity
Hi There, I'm new to this forum, I use Backup Exec 2010 with an IBM LTO5 tape drive and we have three tapes that are showing a capacity of 35.4gb. If I try to use them it does indeed become full after 35.4gb. I've tried a full erase and everything I can think of and they're stuck at this capacity. I know it's only 3 tapes, not the end of the world... But I'm really curious as to what has happened to them. They weren't new, I think they came with the drive and had been opened. Any insight greatly appreciated!