dmp 5.1SP1PR2 installation prevents RHEL 6.4 server to boot
Hello All, Thedmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error Veritas Dynamic Multi-Pathing Startup did not complete successfully vxdmp failed to start on ddci-oml1 vxio failed to start on ddci-oml1 vxspec failed to start on ddci-oml1 vxconfigd failed to start on ddci-oml1 vxesd failed to start on ddci-oml1 It is strongly recommended to reboot the following systems: ddci-oml1 Execute '/sbin/shutdown -r now' to properly restart your systems After reboot, run the '/opt/VRTS/install/installdmp -start' command to start Veritas Dynamic Multi-Pathing installdmp log files, summary file, and response file are saved at: after reboot also it is not starting. i installedsfha-rhel6_x86_64-5.1SP1PR2RP4 rolloing patch and took a reboot, the server is stuck to start during the boot process. i am seeing the error messages from the console as below vxvm:vxconfigd: V-5-1-7840 cannot open /dev/vs/config: Device is already open ln: creating symbolic link '/dev/vx/rdmp/dmp'file exits /bin/mknod/ '/dev/vx/config': File exits . . . Loading vxdmp module Loading vxio module Loading vxspec module the server is stuck at here also i cannot take it to single user mode for trouble shooting. Kindly help me on this issue. Thanks and regards UvSolved