Upgrading OpenSSL in NetBackup
Hello, I'm having a security issue with NetBackup. Basically I need to upgrade the installed version of OpenSSL that came with NetBackup. If the OpenSSL is not effected by the current and past vulnerabilities then I need to see document from Symantec. Theses are the files I need to upgrade /usr/openv/pdde/pdopensource/bin/.bin/openssl /usr/openv/pdde/pdopensource/bin/openssl OpenSSL 0.9.8y This is the version I need to be up to date. OpenSSL 0.9.8za OpenSSL 1.0.0m OpenSSL 1.0.1h I have had this issue before. Below is a link to by earlier post asking this question. http://www.symantec.com/connect/forums/openssl-use-netbackup-7102 I have had this same issue with Java before. This the Symantec fix http://www.symantec.com/business/support/index?page=content&id=TECH148257 This fix is to use the OpenSSL that the OS is using. Is there a way to do this for SSL? I have opened a ticket with support and they don't know anything. They are not able to help me. Can someone help me secure my sever.Solved2KViews0likes9CommentsLimit has been reached for the logical resource
Detailed information is as follows: 07/14/2014 10:25:33 - vault waiting for session ID lock 07/14/2014 10:25:33 - vault session ID lock acquired 07/14/2014 10:25:33 - vault session ID lock released 07/14/2014 10:25:33 - Info nbjm (pid=782712) starting backup job (jobid=193600) for client cic_master, policy DR_CODB_START, schedule DR_CODB 07/14/2014 10:25:33 - Info nbjm (pid=782712) requesting NO_STORAGE_UNIT resources from RB for backup job (jobid=193600, request id:{21A1724A-0AFE-11E4-9240-5B76B0730000}) 07/14/2014 10:25:33 - requesting resource cic_master.NBVAULT.MAXJOBS 07/14/2014 10:25:33 - requesting resource cic_master.NBU_POLICY.MAXJOBS.DR_CODB_START 07/14/2014 10:25:33 - granted resource cic_master.NBVAULT.MAXJOBS 07/14/2014 10:25:33 - granted resource cic_master.NBU_POLICY.MAXJOBS.DR_CODB_START 07/14/2014 10:25:33 - estimated 0 kbytes needed 07/14/2014 10:25:33 - begin Parent Job 07/14/2014 10:25:33 - begin Vault: Start Notify Script 07/14/2014 10:25:33 - Info RUNCMD (pid=1290674) started 07/14/2014 10:25:33 - Info RUNCMD (pid=1290674) exiting with status: 0 Operation Status: 0 07/14/2014 10:25:33 - end Vault: Start Notify Script; elapsed time 0:00:00 07/14/2014 10:25:33 - begin Vault: Execute Script 07/14/2014 10:25:33 - started process bpbrm (pid=1290678) 07/14/2014 10:25:33 - requesting resource cic_master.VAULT_CREATE_SESSION_ID.LOCK_TLD(0)_DR 07/14/2014 10:25:33 - granted resource cic_master.VAULT_CREATE_SESSION_ID.LOCK_TLD(0)_DR 07/14/2014 10:25:38 - vault waiting for duplication lock 07/14/2014 10:25:38 - requesting resource cic_master.VAULT_DUPLICATION.LOCK_TLD(0)_DR 07/14/2014 10:25:38 - Info nbrb (pid=287140) Limit has been reached for the logical resource cic_master.VAULT_DUPLICATION.LOCK_TLD(0)_DR **** Edited by MvdB to insert <CR> ****Solved2.2KViews0likes3CommentsUnable Access Second Partition After Formatting Primary Partition
I recently had fully encrypted hard disk (Toshiba mq01abd075), operating system (Windows 7 Professional), two partition. C (146 GB) and D (548 GB) and 4 GB Unallocated space. I ran the system restore for partition C, after which I was unable to access the operating system. I reinstalled the operating system partition C. I installed PGP WDE, when I entered in the program, partition D does not appear to be decrypted. Partition D appears in My Computer (0 bytes), in computer management at disk management appear 548 GB RAW. If I double click on it ask me for Format, but i've never click Yes, so the second partition was never touch after the problem.After this I reinstalled twice the OS. Now I have windows 8.1 but stil,but still I have not touch the second partition. I've tried to decrypt the drive with a few tutorials such as(WinPE and put the hard disk as second partition): http://www.symantec.com/docs/TECH170574 http://www.symantec.com/business/support/index?page=content&id=TECH149478 Give me various errors suchs as: "Could not locate valid BGFS record. Recovey failed! Operation recover disk failed: Error code -11984 item not found" or "Disk 1 is not instrumented by bootguard" and others. I know was my fault. Please give me a solution. P.S: Sorry for my english, I'm not native and please move this topic if it was not posted properly615Views1like0CommentsBackuping up raw device mapped disk attached to a VM client
I need some knowledge: I'm using Netbackup 7.5.0.3 on Windows Server 2008 with a master and 2 media servers that are my VMWare backup hosts. I. - Backing up VM's with attached RDM disk: I've read the VMWare and snapshot client documentation but I'm still a little unclear about how to backup RDM (raw device mapped) disk. From what I read, I have 2 options: 1. - Install Netbackup client within the VM and backup the VM as I would a physical server. (not preferred.) 2. - Create an alternate backup client that has same OS and patch rev (or higher) that has access to the RDM to utilize offhost snapshot backups. My questions are: a. - Why can't I backup the RDM disk with a VMWare policy? b. - Can I backup the OS filesystem with a VMWare policy and the RDM disk with an alternate client so I can utilize offhost snapshots? c. Are there any differences if the RDM disk is physical or virtual?Solved6.5KViews1like5CommentsInstall 7.0 client on Windows 7
I have Netbackup 7.0 server installed on a Solaris server and Netbackup 7.0 client installed only on Solaris clients. The only software I have is what I downloaded: nb_7.0_solaris_sparc64_1.of.3.tar nb_7.0_solaris_sparc64_2.of.3.tar nb_7.0_solaris_sparc64_3.of.3.tar Does anyone know of a way of installing the Windows client from these files vice the media kit? I no longer have any version of the Windows DVD from the media kit. thanks in advance, rickSolved818Views0likes2CommentsSSR 2011 can not Finde the C:\
Hi I have a HP Blade system with 7. Stk BL460c G7 and 4. Stk WS460c G6. BL460 is installed whit Server 2008 X86 and the WS460 Win7 U. I have installed the SSR 2011, adding all the computers in the computer list and deployed the agents to these. when I shall schedule backup, SSR can not find C: \ drive one BL460 servers, but no problem at WS460. I connected a USB disk on one BL460 server and SSR have non peoblem to finde the USB disk Someone who has been involved in the problem. have an identical system with 70 BL460 and WS460 there is no problem. The system has an HP Smart Arry P410i controller and SSD SATA 60GB disk with RAID 1..Solved503Views0likes2CommentsEnterprise Vault 7.5SP2 Centera to Centera Migration?
We are using EV2007 SP2, with an EMC Centera backend, also using collections. Due to an administrator mishap, several thousand ClipIDs were lost. EMC has been working feverishly to get the IDs reassociated with the data on the Centera. In the mean time, the Vault Stores have been moved to a second Centera and resumed. Mail archiving was unaffected, the only savesets effected were FSA objects. The shortcuts still reside on the file servers. Question is - Once EMC is able to recover any IDs and savesets, what would be the best (and easiest) way to get that data over to the secondary Centera and put in the proper place for the shortcut to work for the user? Currently, we believe this might be our best bet but I wanted to throw it out there and see if anyone had a better idea = Step 1 - Recover the ClipID, and as many savesets as possible Step 2 - Run EVCenteraChecker to unarchive that saveset into a new DVS file Step 3 - Move DVS file to new location and re-associate within database Step 4 - Verify file via EVCenteraChecker or with simple AntiVirus Scan to ensure shortcut pulls file requested.Solved979Views0likes2Commentsautomate missed backups BESR 8.5
Currently i have several laptops on my network with BESR 8.5 installed on them. i have them scheduled to backup at night to a SAN everday. when these systems are taken home they don't backup and in the morning the users click no when asked to run the missed backups. is there a way to take this option away from them? To make this automatic instead of an option?1.5KViews2likes11Comments