Netbackup 7.5 for VMware and DB2 backup.
Hi Guys.... After long time I am creating this thread in NBU forum........... We have the following:- 1. IBM Lotus 8.5 on RHEL 5 (64bit). 2. IBM Content Manager using DB2 9.7 on RHEL 5 (64 bit) used for Lotus Mail Archive. Websphare is used in this software bundle. 3. Two IBM TSM server(In VM ) were used to take Lotus mail backup and DB2 backup respectively. 4. VMware server. 5. A DELL storage server is used for all the VM (VMware datastore) and its in HA mode. Current situation:- 1. There is a IBM TSM (In a VM) taking backup of Lotus mail on to disk. (Disk Based backup). 2. Another IBM TSM (In VM) taking the DB2 backup (Lotus Archive Mail). Now, we were planning to take DB2, Lotus Mail and VMs backup using NBU 7.5. My query:- 1. Can we replace both IBM TSM backup server which was used for taking Lotus mail and DB2 backup. 2. I am not sure that the NBU 7.5 can be used to take DB2 backup and is this DB2 backup will have the entire archive mail. In other word does DB2 backup will backup the Archive mail done by "IBM Content Manager". 3. Is there any restoration issue of this DB2 (Archive mail) on to the IBM Content Manager. What are the pros and cons of replacement of IBM TSM, as this came bundled with IBM Content Manager. Any best practice for this.... Thanks.
Cluster Policy Date, ending with status 1. The requested operation was partially successful (1).
Hello everyone, Have you seen this issue before? I need urgent help becauseI'm facing this issue while i try to back up a VCS cluster, the policy "Cluster Data" returns a error code 1, see the detailed status below: 20/10/2012 04:31:52 - Info bpbrm(pid=5460) D5YLSRR1 is the host to backup data from 20/10/2012 04:31:52 - Info bpbrm(pid=5460) reading file list from client 20/10/2012 04:31:52 - Info nbjm(pid=3688) starting backup job (jobid=6523) for client D5YLSRR1, policy ClusterData, schedule Full 20/10/2012 04:31:52 - Info nbjm(pid=3688) requesting STANDARD_RESOURCE resources from RB for backup job (jobid=6523, request id:{96E060E9-2AC2-4ED7-9A11-4EB7DBFF4435}) 20/10/2012 04:31:52 - requesting resource hfisrv-bkp 20/10/2012 04:31:52 - requesting resource d5ylsrr1.hgi-adm.gov.NBU_CLIENT.MAXJOBS.D5YLSRR1 20/10/2012 04:31:52 - requesting resource d5ylsrr1.hgi-adm.gov.NBU_POLICY.MAXJOBS.ClusterData 20/10/2012 04:31:52 - granted resource d5ylsrr1.hgi-adm.gov.NBU_CLIENT.MAXJOBS.D5YLSRR1 20/10/2012 04:31:52 - granted resource d5ylsrr1.hgi-adm.gov.NBU_POLICY.MAXJOBS.ClusterData 20/10/2012 04:31:52 - granted resource 0005L4 20/10/2012 04:31:52 - granted resource Drive003 20/10/2012 04:31:52 - granted resource hfisrv-bkp 20/10/2012 04:31:52 - estimated 0 Kbytes needed 20/10/2012 04:31:52 - Info nbjm(pid=3688) started backup job for client D5YLSRR1, policy ClusterData, schedule Full on storage unit hfisrv-bkp 20/10/2012 04:31:52 - started process bpbrm (5460) 20/10/2012 04:31:52 - connecting 20/10/2012 04:31:53 - Info bpbrm(pid=5460) starting bpbkar32 on client 20/10/2012 04:31:53 - connected; connect time: 00:00:01 20/10/2012 04:31:57 - Info bpbkar32(pid=912) Backup started 20/10/2012 04:31:57 - Info bptm(pid=5116) start 20/10/2012 04:31:57 - Info bptm(pid=5116) using 65536 data buffer size 20/10/2012 04:31:57 - Info bptm(pid=5116) setting receive network buffer to 263168 bytes 20/10/2012 04:31:57 - Info bptm(pid=5116) using 30 data buffers 20/10/2012 04:31:57 - Info bptm(pid=5116) start backup 20/10/2012 04:31:57 - Info bptm(pid=5116) Waiting for mount of media id 0005L4 (copy 1) on server hfisrv-bkp. 20/10/2012 04:31:57 - mounting 0005L4 20/10/2012 04:32:48 - Info bptm(pid=5116) media id 0005L4 mounted on drive index 3, drivepath {6,0,16,0}, drivename Drive003, copy 1 20/10/2012 04:32:48 - mounted; mount time: 00:00:51 20/10/2012 04:32:48 - positioning 0005L4 to file 65 20/10/2012 04:33:33 - positioned 0005L4; position time: 00:00:45 20/10/2012 04:33:33 - begin writing 20/10/2012 04:42:15 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\System Volume Information\Syscache.hve (WIN32 32: Unknown error) 20/10/2012 04:42:15 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\System Volume Information\Syscache.hve.LOG1 (WIN32 32: Unknown error) 20/10/2012 04:42:15 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\System Volume Information\Syscache.hve.LOG2 (WIN32 32: Unknown error) 20/10/2012 04:42:16 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Users\Administrator.HGI-ADM\AppData\Local\Microsoft\Windows\UsrClass.dat.LOG1 (WIN32 32: Unknown error) 20/10/2012 04:42:16 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Users\Administrator.HGI-ADM\AppData\Local\Microsoft\Windows\UsrClass.dat.LOG2 (WIN32 32: Unknown error) 20/10/2012 04:42:20 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Users\Administrator.HGI-ADM\ntuser.dat.LOG1 (WIN32 32: Unknown error) 20/10/2012 04:42:20 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Users\Administrator.HGI-ADM\ntuser.dat.LOG2 (WIN32 32: Unknown error) 20/10/2012 04:43:31 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Windows\ServiceProfiles\LocalService\AppData\Local\lastalive0.dat (WIN32 32: Unknown error) 20/10/2012 04:43:31 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Windows\ServiceProfiles\LocalService\AppData\Local\lastalive1.dat (WIN32 32: Unknown error) 20/10/2012 04:43:36 - Warning bpbrm(pid=5460) from client D5YLSRR1: WRN - can't open file: C:\Windows\ServiceProfiles\LocalService\NTUSER.DAT.LOG1 (WIN32 32: Unknown error) 20/10/2012 04:43:36 - Info bpbrm(pid=5460) from client D5YLSRR1: TRV - last message being suppressed after 10 occurrences 20/10/2012 04:45:25 - Error bpbrm(pid=5460) from client D5YLSRR1: ERR - failure reading file: D:\Program Files\Veritas\NetBackup\logs\nbemm\51216-111-3109920203-121020-0000000000.log (WIN32 13: Unknown error) 20/10/2012 05:06:48 - Info bpbkar32(pid=912) bpbkar waited 27237 times for empty buffer, delayed 29002 times. 20/10/2012 05:06:48 - Info bptm(pid=5116) waited for full buffer 18755 times, delayed 72195 times 20/10/2012 05:06:52 - Info bptm(pid=5116) EXITING with status 0 <---------- 20/10/2012 05:06:52 - Info bpbrm(pid=5460) validating image for client D5YLSRR1 20/10/2012 05:06:53 - end writing; write time: 00:33:20 the requested operation was partially successful(1) The job was successfully completed, but some files may have been busy or unaccessible. See the problems report or the client's logs for more details. 20/10/2012 05:06:58 - Info bpbkar32(pid=912) done. status: 1: the requested operation was partially successful
BMRERR for winodows XP of DELL PC
HI, all I wanna BMR backup follow PC. DELL Latitude E6410 windowsXP 32bit Netbackup version is 7.1 BMR backup didint carry out well. Except Dell PC, BMR gets success. Please tell me the reason this happen and solution. Report is as follow. 2012/03/26 10:06:48 - connected; connect time: 00:00:00 2012/03/26 10:07:01 - Error bpbrm(pid=4552) BMRERR: Received BMR error: The .inf file c:\windows\inf\oem16.inf does not have the neccessary information about the driver files. Please install the latest version of the Intel(R) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D drivers, which, in most cases, resolves the problem. (1) 2012/03/26 10:07:01 - Error bpbrm(pid=4552) BMRERR: Received BMR error: Failed to run Windows specific tasks. (1) 2012/03/26 10:07:02 - Error bpbrm(pid=4552) BMRERR: Received BMR error: Send of discovery not attempted. (1) 2012/03/26 10:07:02 - Error bpbrm(pid=4552) BMRERR: Received BMR error: BMR information discovery failed. (1) 2012/03/26 10:07:02 - Error bpbrm(pid=4552) BMRERR: Did not receive bmr client request from "hostname", status = -1 2012/03/26 10:07:02 - end writing Status 26 2012/03/26 10:07:02 - end Bare Metal Restore, BMR Save; elapsed time: 00:00:21
WIN32 errors - Netbackup 6.5
Recently we have had several of our backups finishing partially sucessful due to the following error on variuos drvies and clients. Error bpbrm (pid=3224) from client *****.**** : ERR - failure reading raw device: \\.\D: (WIN32 2: The system cannot find the file specified. ) Can anyone assist in troubleshooting this particular issue?Synthetic Full Backups miss after 4 weeks
Master/media servers are NBU Enterprise 6.5.4, on Dell PE2950 running Windows 2003 Server R2 X64. After several years of successful traditional Full/Cumulative backups, I have setup three policies with Synthetic Fulls. They all start off OK, and the Diff Incrementals are fine. But the weekly sequence for the Fulls is :- Trad OK, Synth OK, Synth OK, Synth OK, Synth OK, nothing! The Diff Incrs are unaffected, though - they carry on as intended. After 4 good Synth Fulls we see no warnings or errors, no bpsynth log, no bpsyn_ entries in bptm log - nothing. I have captured the nbpemreq -predictall output after the Friday Diff Incr just before the missing Synth, and it shows no entry for the Synth that's due - it has obviously forgotten about it - a scheduler problem perhaps. To get started again, I just have to run a Trad Full, then we get 4 weekends of Synth Fulls, then it stops again. All predictable and reproducible. Two affected policies are big fileshares (>1TB >2m files) on SAN storage attached to a cluster of Dell NX1950's; the third policy is >100GB >1m files on a typical Windows server. Apart from the number of files, no pattern there. Our retention policy is 1 month - maybe that's significant (last Trad Full image expires and disappears over the horizon) Anybody with experience or ideas about this? TIA
Error 13 when backing up Shadow Copy Components
NBU 6.5.6 Master Server Solaris 10 NBU Client 6.5.6 Windows 2008 R2 Domain Controller Status = file read failed. I upgraded my servers and clients to version 6.5.6 thinking this would fix this issue. I have seen some other posts about error 13 but have not found a fix. Please help! Thanks Brian