accessing MSDP and dedup pool from mulitple networks
Hello all, First of all i would like to provide my excuse for my poor english writing, i'm french. I come today on this forum to query advices and solutions for the problem i'm going to report here. i just come to deploy a netbackup environnement with these architecture: netbackup version: 7.6.1 - Principal Site: Rôles: backup VMWare virtual machines (hypervisor network) thru media-hyp-princ.domain.fr network interface backup clients for physical servers (backup network) thrumaster-princ.domain.fr of the master andmedia-princ.domain.fr for the media NDMP backup Operating system:Windows 2012R2 for master and media one VM (VMWare): master server/EMM, one network interface on backup network (master-princ.domain.fr) One physical server: MSDP with one dedup pool attached MSDP is multi-homed: one network interface on hypervisor network (bonding SFP+ 10Gb,media-hyp-princ.domain.fr), one network interface on backup network (bonding SFP+ 10Gb, media-princ.domain.fr) MSDP FQDN is configured on hypervisor network hostname (media-hyp-princ.domain.fr) The media gateway is on the backup network, on the network interface media-princ.domain.fr The master gateway is on the backup network, on the network interface master-princ -Secondary site: Rôle: AIR (Auto image Replication) One netbackup appliance 5230: master/media MSDPFQDN is configured on backup network hostname (master-sec.domain.fr) MSDP has just one bonding SFP+ 10Gb on backup network (master-sec.domain.fr) Each backup (VMs and clients) on the principal site are replicated via AIR to the secondary domain (using SLP) i've checked the network client backup flow and all transits thru the backup vlan (media-princ.domain.fr), that we want And the VMWare backup is on the same VLAN (hypervisor vlan) so the backup flow transits thru media-hyp-princ.domain.fr network interface All works great but.... The deduplication pool is attached to the MSDP hostname media-hyp-princ.domain.fr, on the hypervisor VLAN and i try to associate media-princ.domain.fr to the MSDP that it could be recognize as media-princ.domain.fr and media-hyp-princ.domain.fr i've added media-princ.domain.fr as media server and you ca see below the nbemmcmd.exe -listhosts result: <netbackup_install_path\NetBackup\bin\admincmd>nbemmcmd.exe -listhosts NBEMMCMD, Version: 7.6.1 The following hosts were found: server master-princ.domain.fr master master-princ.domain.fr media media-hyp-princ.domain.fr ndmp media-hyp-princ.domain.fr remote_master master-sec virtual_machine vcenter.domain.fr replication_host master-sec media media-princ.domain.fr ndmp vuserhomedata-cl1.domain.fr Command completed successfully. media-princ.domain.fr and media-hyp-princ.domain.fr appear on the media list from the netbackup windows administration console as media server. As you can see, media-princ.domain.fr and media-hyp-princ.domain.fr are the same physical media server but on differents vlans Why i want to do this ? because when i try to backup Active Directory servers with granular recovery, client backed up try to communicate with media-hyp-princ.domain.fr, and this is the only error i encounter. Below the nbfsd logs on the client: 12:25:18.724 [472.2344] <2> logparams: <install_path_netbackup_client>\Veritas\NetBackup\bin\nbfs mount -server media-hyp-princ.domain.fr -port 7394 -retry 11 -cred ABCDEFGHIJKLMNOPQRSTUV (cred volontary replaced for copy on this forum) * 12:25:18.739 [472.2344] <2> rpc_connect: connecting to media-hyp-princ.domain.fr 12:25:39.753 [472.2344] <16> rpc_connect: can't create TCP connection to media-hyp-princ.domain.fr (12 10060), will retry... 12:25:44.760 [472.2344] <2> rpc_connect: connecting to media-hyp-princ.private.univ-tlse3.fr 12:26:05.773 [472.2344] <16> rpc_connect: can't create TCP connection to media-hyp-princ.domain.fr (12 10060), will retry... 12:26:10.781 [472.2344] <2> rpc_connect: connecting to media-hyp-princ.domain.fr 12:26:31.810 [472.2344] <16> rpc_connect: can't create TCP connection to media-hyp-princ.domain.fr (12 10060), giving up I've tried to manually debug using this methode below but replacing media-hyp-princ.domain.fr by media-princ.domain.fr: https://www.veritas.com/support/en_US/article.TECH124810 and it works.... i've tried to create medi-hyp-princ.domain.fr alias with media-princ.domain.fr instead of declaring media server media-princ.domain.fr I've tried to modify hosts file on the client to backed up with the IP adress of media-princ.private.domain.fr for media-hyp-princ.domain.fr i've tried preferred network QUESTIONS: 1) Do i have to re-install everything from scratch using medi-princ.domain.fr as MSDP name ? i found the link below: https://www.veritas.com/support/en_US/article.000072756 Perhaps is it the best solution for me because i have a lot of production backup on the media 2) If i do this, do will i have trouble to backup virtual Machines with a deduplication pool attached on a MSDp on backup VLAN (media-princ.domain.fr) 3) I've tried to associate media-princ.domain.fr to the Storage Unit (PureDisk, dedup-pool) but it doesn't appear (i know that it must be a MSDP and not alonely a media server).Can i configure a second MSDP (with differents credentials and different name)on the same server ? i think no Because MSDP is declared on hypervisor vlan, my responsible wants i re-install everything.... After such a big works, i'm desesperate in the idea to re-install everythings, i did all the research, test, and implementation alone, without help, this represent months of work, but in my test environnement, my media wasn't on multiple network, just on the hypervisor network, so i did the same configuration on my pre-production architecture and i think now this is a mistake to configure my MSDP on the hypervisor network Thanks a lot in advance for your advices and solutions
Repairing DLO database finished with status: Failed
I am trying to run the C:\Program Files\Symantec\Symantec DLO>dlocommandu -reportinfogen -dbserver dlo-server -dbinstance BKUPEXEC command to get accurate report info. When I execute it runs for 20 minutes then dumps a lot of error info. Data mining started... Unhandled exception :ADODBError-_com_error: foundationerror=80040e14, comerr=800 40e14, nativeerror=102, conn=Provider=SQLOLEDB;Initial Catalog=DLO;Integrated Se curity=SSPI;Net=dbnmpntw;Address=\\DLO-SERVER\pipe\MSSQL$BKUPEXEC\sql\query;Conn ect Timeout=20, query=INSERT INTO FileTypeUsage(FTUUser, FTUExtension, FTUMachin eName,FTUProfileName, FTUTime, FTUFileCount, FTUUsage) VALUES ('Presswood','alumnipartners','PL39391','1 My Documents',convert(datetime When I run the repair command it rturns a failure. We are not using Dedupe. C:\Program Files\Symantec\Symantec DLO>DLODBUtils -repair Repairing the database... Repairing DLO database finished with status: Failed. Repairing Dedupe database finished with status: Succeeded.Vmware View and Netbackup 7.6
Hello, I'm trying to backup a VDI environment w/ Netbackup. I'm able of using the VIP (vmware inteligente policy) that I can backup everyting starting w/ VDESK* using linked clones I was trying to use an option (clicking Advanced at vmware pannel) select "dont backup boot disk" that was supposed to be perfect, the only problem is that Vmware do not understand the Snapshot that Netbackup needs to execute. does anyone have won this challenge? I do not want to install an agente in every virtual desktop so I 'll have some problem W/ DNS and I really don't want to :) I have read something about create the persistant disk in a different datastore, so Vmware dont recomend that. Best Regards Any Idea will be very usefull
Cannot create recovery point, Unable to establish network connection, The specified network password is not correct
Error EC8F17B7: Cannot create recovery points for job: Drive Backup of (H:\) Daily 1. Error EC8F03ED: Cannot create the recovery point. Error E7D10041: Unable to establish a network connection to \\sms-rackstation\server 3 backup. Error EBAB03F1: The specified network password is not correct. (UMI:V-281-3215-6071)SSR stuck at Copying volume data over existing volume
Using SSR 2011 I created a restore point from a Dell netbook. Now I am trying to recover that point on an Asus netbook. I am using restore anywhere. The recover took about an hour to get to 99% now for over an hour it has been stuck at "copyng volume data over existing volume". It shows like its moving data but that is it. Im stuck and dont want to have to start over but I have a feeling that, thats what its going to come to. Any help would be much appricated. Thanks!
