high availability

112 Topics

I want to switch the application to minos2，but I cannot select the system
I want to switch the application to minos2，but I cannot select the system No system，why？ root@minos1(/)# hastatus -sum -- SYSTEM STATE -- System State Frozen A minos1 RUNNING 0 -- GROUP STATE -- Group System Probed AutoDisabled State B ClusterService minos1 Y N ONLINE B EMS minos1 Y N ONLINE B replication minos1 Y N ONLINE -- REMOTE CLUSTER STATE -- Cluster State N minos2 RUNNING -- REMOTE SYSTEM STATE -- cluster:system State Frozen O minos2:minos2 RUNNING 0
liqiyuan
9 years ago Place Cluster Server
1.5KViews
0likes
3Comments
Automatic Failover
I would like to use Veritas Cluster Server to achieve high availability and automatic fail over for my applications. These application are java applications with some services with the backend databases using Sybase The java applications can be broken into 2 parts : web layer and application layer. The underlying infrastructure will be in RHEL Linux for java applications and database (Sybase) My question is : is VCS supporting seamless automatic failover for the java services including database services without requiring manual intervention ? What i want to achieve is : after i setup active-passive for application layer, i expect the active node to automatically failover to passive node and immediately the passive node become active node
Solved
haditeo
9 years ago Place Cluster Server
1KViews
0likes
1Comment
setting llt (low prio net) in a bond configured in a bridge
Hi, I want to set a low prio network over a bond which is part of a bridge. I have a cluster with two nodes. This is the network configuration (it is the same for both nodes): node 2: [root@node2 ]# cat /proc/version Linux version 2.6.32-504.el6.x86_64 (mockbuild@x86-023.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #1 SMP Tue Sep 16 01:56:35 EDT 2014 [root@node2 ]# ifconfig | head -n 24 bond0 Link encap:Ethernet HWaddr 52:54:00:14:13:21 inet6 addr: fe80::5054:ff:fe14:1321/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:761626 errors:0 dropped:0 overruns:0 frame:0 TX packets:605968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1188025449 (1.1 GiB) TX bytes:582093867 (555.1 MiB) br0 Link encap:Ethernet HWaddr 52:54:00:14:13:21 inet addr:10.10.11.102 Bcast:10.10.11.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fe14:1321/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49678 errors:0 dropped:0 overruns:0 frame:0 TX packets:50264 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:44061727 (42.0 MiB) TX bytes:28800387 (27.4 MiB) eth0 Link encap:Ethernet HWaddr 52:54:00:14:13:21 UP BROADCAST RUNNING PROMISC SLAVE MULTICAST MTU:1500 Metric:1 RX packets:761626 errors:0 dropped:0 overruns:0 frame:0 TX packets:605968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1188025449 (1.1 GiB) TX bytes:582093867 (555.1 MiB) [root@node2 ]# brctl show bridge name bridge id STP enabled interfaces br0 8000.525400141321 no bond0 [root@node2 ]# cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 52:54:00:14:13:21 Slave queue ID: 0 node 1: [root@node1]# ifconfig | head -n 24 bond0 Link encap:Ethernet HWaddr 52:54:00:2E:6D:23 inet6 addr: fe80::5054:ff:fe2e:6d23/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:816219 errors:0 dropped:0 overruns:0 frame:0 TX packets:668207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1194971130 (1.1 GiB) TX bytes:607831273 (579.6 MiB) br0 Link encap:Ethernet HWaddr 52:54:00:2E:6D:23 inet addr:10.10.11.101 Bcast:10.10.11.255 Mask:255.255.255.0 inet6 addr: fe80::5054:ff:fe2e:6d23/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:813068 errors:0 dropped:0 overruns:0 frame:0 TX packets:640374 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1181039350 (1.0 GiB) TX bytes:604216197 (576.2 MiB) eth0 Link encap:Ethernet HWaddr 52:54:00:2E:6D:23 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:816219 errors:0 dropped:0 overruns:0 frame:0 TX packets:668207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1194971130 (1.1 GiB) TX bytes:607831273 (579.6 MiB) [root@node1]# brctl show bridge name bridge id STP enabled interfaces br0 8000.5254002e6d23 no bond0 [root@node1 ]# cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 52:54:00:2e:6d:23 Slave queue ID: 0 the llt configuration files are the following: [root@node1 ]# cat /etc/llttab set-node node2 set-cluster 1042 link eth3 eth3-52:54:00:c3:a0:55 - ether - - link eth2 eth2-52:54:00:35:f6:a5 - ether - - link-lowpri bond0 bond0 - ether - - [root@node1 ]# cat /etc/llttab set-node node1 set-cluster 1042 link eth3 eth3-52:54:00:bc:9b:e5 - ether - - link eth2 eth2-52:54:00:31:fb:31 - ether - - link-lowpri bond0 bond0 - ether - - However this seems that is not working. When I check the llt status, the node thinks the interface is down in the other one. [root@node2 ]# lltstat -nvv | head LLT node information: Node State Link Status Address 0 node1 OPEN eth3 UP 52:54:00:BC:9B:E5 eth2 UP 52:54:00:31:FB:31 bond0 DOWN * 1 node2 OPEN eth3 UP 52:54:00:C3:A0:55 eth2 UP 52:54:00:35:F6:A5 bond0 UP 52:54:00:14:13:21 [root@node2 ]# lltstat -nvv | head LLT node information: Node State Link Status Address * 0 node1 OPEN eth3 UP 52:54:00:BC:9B:E5 eth2 UP 52:54:00:31:FB:31 bond0 UP 52:54:00:2E:6D:23 1 node2 OPEN eth3 UP 52:54:00:C3:A0:55 eth2 UP 52:54:00:35:F6:A5 bond0 DOWN Do you know if I have something worng? Is this a valid configuration? Thanks, Javier
javierv
10 years ago Place Cluster Server
1.6KViews
0likes
4Comments
Replacing node
hi, I am using VCS on two node cluster having OS Solaris 10 Sparc. One primary node is having 13 CPU, 52 GB RAM and secondarynode is having 4 CPU, 20 GB RAM. In case of primary node failure, secondary node is unable to handle the load. So we want to replace the secondary node with the same capacity as primary. The new node which I am preparing is from same hardware family having 16 CPU, 64 GB RAM. I have installed OS on it. My question is about the VCS installation and configuration on new node.What should be correct process of VCS installation to make new node asexact replica of secondary node with minimal downtime? Please revert ASAP. Thanks Amit
Solved
Amit_Aggarwal
10 years ago Place Cluster Server
869Views
0likes
2Comments
VCS 6.2 Agents for Adabas and MariaDB
Hi colleagues, For a customer I have to integrate two seperate databases into VCS 6.2 running on Oracle Linux. However I have no experience with both of them. And I could not find anything on SORT. Could someone point me to the right direction regarding the VCS Agents? MariaDB The first one is MariaDB. However I can not find anything about MariaDB together with VCS. As I found out MariaDB is a spinoff from MySQL since the Oracle/Sun merge, it's very simular to MySQL. Does this mean I can use the same datbase resource as one would use for MySQL? Or is there a sperate one? I assume MariaDB works seemless with VCS 6.2, since I saw this Release Note of SFHA 6.2 stating "Performance improvements forMySQL and MariaDB applications". So I would guess it works great, but I can not find any Agent. Source: https://www-secure.symantec.com/connect/sfha62 Adabas The other database to integrate is Adabas (from Software AG). From what I learned from Google, I see there was a Partner Agent for VCS 4.1 MP1, but only for Solaris on SPARC or Solaris on x86. But no Linux. That is confirmed in the lit of Partner Agents in the "vcs_agent_support_matrix" spreadsheet (only Solaris on SPARC or x86, but no Linux). I also found a Symantec Article about an issue with the Adabas Agent for VCS 6.1 on SPARC/Solaris, but I can not find the Linux Agent on SORT. According to this Symantec Article the Agent should be released under the STEP (Symantec™ Technology Enabled Program). Source: https://support.symantec.com/en_US/article.TECH60665.html But when I look on SORT at the Agents for STEP, no Agents are listed. Source: https://sort.symantec.com/agents/detail/1142 The manufacturer, Software AG, also has a Wiki page dedicated to Adabas with VCS. But no info regarding the Agent. Source: https://techcommunity.softwareag.com/pwiki/-/wiki/Main/Using+Veritas+to+Enable+Adabas+High+Availability Any tips or links to the correct Agents? Thanks in advance, Sander Fiers
Solved
sanderfiers
10 years ago Place Cluster Server
1.1KViews
0likes
2Comments
HAD unregistration problem with gab (failed) : VCS 6.0
Dear Team, I'm a newbi here. We have a VCS setup on two linux (6.4) nodes (SFCFSHA 6.0). When customer tried to reboot a master node, the following error messages (confirming that HAD has unregistered with VCS (retry 1) FAILED)appeared on iLOM and it caused the panic on slave node too. Now the node is up and everything looks okay. But we have to find out the cause for this error message. Please check the attached file for screenshot of the error message. Looking forward for your help. Thanks and Regards Barani
Solved
barani_129
10 years ago Place Cluster Server
3.7KViews
1like
15Comments
Integrating SAP with VCS 6.2 (on Oracle Linux 6.5)
Hi, I was wondering if someone has some additional information regarding how to setup my cluster... I have both VCS (inclusing Storage Foundation) and Linux knowledge. I do however have no background in SAP. And as SAP is a very complex product, I can not see the forest because of the trees... Setup 2 node (active-passive) cluster of Oracle Linux 6.5 nodes. Veritas Storage Foundation HA (= VxVM + DMP + VCS). Oracle 11.2 as database. SAP ECC 6.0 Apart from the Installation & Configuration guide on the SAP NetWeaver Agent, I found little information about implementing SAP in VCS. Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2". But unfortunately I can not find a howto, guide or whatever from Symantec, nor from the usual Google attempts. My customer is however also not very SAP knowledged. From what I understand it is a very basic SAP setup, if not the simplest. They are using SAP ECC6.0 and an Oracle 11.2 database. So I assume they are just having a Central Instance and the Database. After some Google resource, I found out that SAP ECC 6.0 is technically a SAP NetWeaver 7.0. On Symantec SORT, I found 3 versions of SAP NetWeaver. I downloaded the first one, as the descripton says: SAP NetWeaver SAP NetWeaver 7.1, 7.2, 7.3, 7.4 SAP NetWeaver 7.1, 7.3 Agent: SAPNW04 5.0.16.0 Application version(s): SAP R/3 4.6, R/3 Enterprise 4.7, NW04, NW04s, ERP/ECC 5.0/6.0, SCM/APO 4.1/5.0/5.1/7.0, SRM 4.0/5.0/7.0, CRM 4.0/5.0/7.0 Source: https://sort.symantec.com/agents/detail/1077 SAP ERP 2005 = SAP NetWeaver 2004s (BASIS 7.00) = ECC 6.0 Source: http://itknowledgeexchange.techtarget.com/itanswers/difference-bet-ecc-60-sap-r3-47/ Source: http://www.fasttrackph.com/sap-ecc-6-0/ Source : http://wulibi.blogspot.be/2010/03/what-is-sap-ecc-60-in-brief.html Currently I have this setup unfinshed: Installed & configured Storage Foundation HA on both nodes. Instaled the ACC Libraries on both nodes. see: https://sort.symantec.com/agents/detail/1183 Installed the SAP NetWeaver Agent on both nodes. see: https://sort.symantec.com/agents/detail/1077 Configured next to the CusterServiceGroup, 3 Service Groups: SG_sap the shared storage Resources: DiskGroup + Volumes + Mount. the SAPNW Agent Resource. SG_oracle the shared storage Resources: DiskGroup + Volumes + Mount the Oracle Agent Resurce. SG_nfs still empty. SAPNW Agent. SAP instance type The SAPNW Agent documentation states: The agent supports the following SAP instance types: Central Services Instance Application Server Instance Enqueue Replication Server Instance. Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" But I guess the SAP ECC 6.0 has them all in one central instance, right? So I only need one SAPNW Agent. How is the SAP installed: only ABAP only Java add-in (both ABAP and Java). Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" I have no idea. How can I find this out? InstName Attribute Another thing is the InstName Attribute. This also does not correspond with the information I have. My SAP intance is T30. So the syntax is correct more or less, but it isn't listed below. Which is important also to decide on the value for the ProcMon Attribute The SAPSID and InstName form a unique identifier that can identify the processes running for a particular instance. Some examples of SAP instances are given as follows: InstName = InstType DVEBMGS00 = SAP Application Server - ABAP (Primary) D01 SAP = Application Server - ABAP (Additional) ASCS02 = SAP Central Services - ABAP J03 = SAP Application Server - Java SCS04 = SAP Central Services - Java ERS05 = SAP Enqueue Replication Server SMDA97 = Solution Manager Diagnostics Agent Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" In the listing of the required attributes it is also stated. However, the default value is CENTRAL. I guess this is correct in my case? InstName Attribute: An identifier that classifies and describes the SAP server instance type. Valid values are: APPSERV: SAP Application Server ENQUEUE: SAP Central Services ENQREP: Enqueue Replication Server SMDAGENT: Solution Manager Diagnostics Agent SAPSTARTSRV: SAPSTARTSRV Process Note: The value of this attribute is not case-sensitive. Type and dimension: string-scalar Default: APPSERV Example: ENQUEUE EnqSrvResName Attribute A required attribute is the EnqSrvResName Attribute. The documentation says this should be the Resource Name for the SAP Central Instance. But I am assuming I only have a SAP Central Instance. So I guess I should use the name of my SAP Agent Resouce from my SAP Service Group? EnqSrvResName Attribute: The name of the VCS resource for SAP Central Services (A)SCS Instance. This attribute is used by Enqueue and Enqueue Replication Server. Using this attribute the Enqueue server queries the Enqueue Replication Server resource state while determining the fail over target and vice a versa. Type and dimension: string-scalar Default: No default value Example: SAP71-PI1SCS_sap Source: "Symantec™ High Availability Agent for SAP NetWeaver Installation and Configuration Guide for Linux 6.2" Is anyone able to help me out? Thanks in advance.
Solved
sanderfiers
10 years ago Place Cluster Server
2.4KViews
2likes
9Comments
IP agent for same mac address interface
Hi all, Our environment as the following: OS: redhat 6.5 VCS: VCS 6.2.1 Our server have two physical network port, namely eth0 and eth1. We do create tagged vlan, vlan515, vlan516, vlan518, vlan520 based on eth0 and eth1. We are able to create resource IP on vlan518 and failover between two nodes. However, when we create resource IP on vlan515, it is not able to bring it online. According to the link, https://support.symantec.com/en_US/article.TECH214469.html, It knows that duplicate mac address would cause the problem. However, it can't figure out where "MACAddress" attribute in VCS Java Console as mentioned in the solution. I did manually add "MACAddress" attribute on main.cf on either NIC or IP resource, it come with not support with haconf -verify command. Any hints or solution for the problem when configure the IP agent resource on same mac address? Thanks, Xentar
Solved
Xentar
10 years ago Place Cluster Server
5.5KViews
0likes
22Comments
how LLT heartbeat setting MAC address ?
I was able to set theMAC addressin LLT , but its getting changed after every server reboot, Node A # lltstat -nvv | head -10 LLT node information: Node State Link Status Address * 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC -- vnet1 UP 00:14:4F:F8:F5:AC --- 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 -- vnet1 UP 00:14:4F:F9:E0:17 -- Node B # lltstat -nvv | head -10 LLT node information: Node State Link Status Address 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC -- vnet1 UP 00:14:4F:F8:F5:AC --- * 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:F9:E0:17 --- vnet1 UP 00:14:4F:FB:5E:07 ---- I got abovepost VCS instllation, So I followedbelow steps to change the MAC address for Vnet1 and Vnet3 gabconfig -U svcadm disable svc:/system/gab:default lltconfig -k disable svcadm disable svc:/system/llt:default svcadm enable svc:/system/llt:default lltconfig -k enable svcadm enable svc:/system/gab:default /sbin/gabconfig -c -n2 It has changed here, Node A: # lltstat -nvv | head -10 LLT node information: Node State Link Status Address * 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC vnet1 UP 00:14:4F:F8:F5:AC 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 vnet1 UP 00:14:4F:F9:E0:17 Node B # lltstat -nvv | head -10 LLT node information: Node State Link Status Address 0 node a OPEN vnet2 UP 00:14:4F:F8:3B:B7 vnet3 UP 00:14:4F:F9:73:DC vnet1 UP 00:14:4F:F8:F5:AC * 1 node b OPEN vnet2 UP 00:14:4F:FA:2B:77 vnet3 UP 00:14:4F:FB:5E:07 vnet1 UP 00:14:4F:F9:E0:17 but after server reboot went to orginal state of non-sync mode. where Vnet1's MAC and Vnet3's MAC changed. Any body know how the setting happens? how it is fetching and from where? how to make it permanent?
Solved
skmohanbe
10 years ago Place Cluster Server
1.5KViews
0likes
2Comments
VCS clustered Enterprise vault migrate index service to new node
Hi, We have three node cluster for Enterprise vault in Veritas Cluster server, the node details are as follows: Node 1: EV server with all services Node 2: SQL server Node 3: Spare server for EV service failover and SQl service failover. Also GCO and VVR is configured for SQl server and EV server volumes are replicating using VVR but are not in VCS control. Now we want to remove index service from EV server (node 1) and add it to new server, also add new server to the cluster. Can anybody share the steps we should follow from VCS end to perform above changes.
r1_abhinav
10 years ago Place Cluster Server
1.1KViews
0likes
5Comments