Application ha6.1 suppport matrix for vmware rethat 6 guest
hi, I have installed symantec ha console 6.1 on windows platform . Is this the newest verion for windows platform? I know linux platform you can install to 6.2 version. what is suppport matrix for vmware rethat 6 guest OS for application ha? Where can I find this information? Thanks AllenSolved3.4KViews0likes1Comment
failed to bring up HeartBeat interface with GAB config
Dear Experts, I'm facing an issue here in cluster setup 8+2 I have managed to create 1+1 cluster and when trying to add the 3rd node I got stuck in gabconfig step below is the /var/adm/messages Jun 21 22:49:50 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartCore: Starting hardware (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Phy capabilities (1) (supported 0x00000f50 0x00000000) (link_config 0x01000000 0x00000000) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.warning] WARNING: bnxe3: Phy 10000fdx requested but not supported Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Phy requesting link config of 0x00000006 Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: 10Gb Full Duplex Rx Flow ON Tx Flow ON Link Up Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartCore: Hardware started (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartL2: L2 started (clients L2) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopL2: Stopping L2 (clients L2) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopCore: Stopping hardware (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Link Down Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopCore: Hardware stopped (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopL2: L2 stopped (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartL2: Starting L2 (clients None) Jun 21 22:49:51 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartCore: Starting hardware (clients None) Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Phy capabilities (1) (supported 0x00000f50 0x00000000) (link_config 0x01000000 0x00000000) Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.warning] WARNING: bnxe3: Phy 10000fdx requested but not supported Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Phy requesting link config of 0x00000006 Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: 10Gb Full Duplex Rx Flow ON Tx Flow ON Link Up Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartCore: Hardware started (clients None) Jun 21 22:49:52 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStartL2: L2 started (clients L2) Jun 21 22:49:53 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopL2: Stopping L2 (clients L2) Jun 21 22:49:53 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopCore: Stopping hardware (clients None) Jun 21 22:49:53 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: Link Down Jun 21 22:49:53 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopCore: Hardware stopped (clients None) Jun 21 22:49:53 MM-BL2 bnxe: [ID 801725 kern.info] NOTICE: bnxe3: BnxeHwStopL2: L2 stopped (clients None) knowing that I have the same network profiles interfaces for all blades ( HP Proliant blades ) any ideas how this can be fixed ? BR Mahmoud2KViews0likes1Comment
symantec AppHA problem
Hi my esxi version is 5.5 u2 and my vcenter version is 5.5 u1 now i have downloaded VCS 6.1 & High availability console 6.1 & application HA 6.1 i have reade all of documents but now i am so confused pleas say me ehat is the order of installing symantec product and say me please each of these product on what vm do i have to install? for example on vcenter server or ........ for example i have installed ha console on a seprate machine but when connect to vcenter on product there is no vm i have attached files i dont know what is my problem so thanks babakSolved3.4KViews0likes14Comments
Solaris 10 + Zones + ZFS + VCS
Hi all, I don't have a lot of experiences on VCS I have 2 servers on Solaris 10 update 11, installed on ZFS (rpool), and I want to do a Cluster for an application APP Node A = zonea (zonepath for zonea is ZFS / local disk ZFS ) Node B = zoneb (zonepath for zoneb is ZFS / loacl disk ZFS ) The application APP ( FailOver) have to move between zonea and zoneb With that configuration it is possible to do this ? If not what is the best practices : salaris 10 + zfs local zones + VCS 6.0.1 ? Best RegardsSolved1.7KViews0likes1Commentdmp 5.1SP1PR2 installation prevents RHEL 6.4 server to boot
Hello All, The dmp 5.1SP1PR2 installation is completing but it unable to start it. getting follwing error Veritas Dynamic Multi-Pathing Startup did not complete successfully vxdmp failed to start on ddci-oml1 vxio failed to start on ddci-oml1 vxspec failed to start on ddci-oml1 vxconfigd failed to start on ddci-oml1 vxesd failed to start on ddci-oml1 It is strongly recommended to reboot the following systems: ddci-oml1 Execute '/sbin/shutdown -r now' to properly restart your systems After reboot, run the '/opt/VRTS/install/installdmp -start' command to start Veritas Dynamic Multi-Pathing installdmp log files, summary file, and response file are saved at: after reboot also it is not starting. i installed sfha-rhel6_x86_64-5.1SP1PR2RP4 rolloing patch and took a reboot, the server is stuck to start during the boot process. i am seeing the error messages from the console as below vxvm:vxconfigd: V-5-1-7840 cannot open /dev/vs/config: Device is already open ln: creating symbolic link '/dev/vx/rdmp/dmp'file exits /bin/mknod/ '/dev/vx/config': File exits . . . Loading vxdmp module Loading vxio module Loading vxspec module the server is stuck at here also i cannot take it to single user mode for trouble shooting. Kindly help me on this issue. Thanks and regards UvSolved
Hostmode setting on SunSTK 6180 after upgrade no longer supported
Goodafternoon, We are in the progress of doing an upgrade to our STKSUN 6180 disk array to firmware version 07.84.44.10. In the release notes of this firmware we run into the following challenge : Solaris Issues Solaris with Veritas DMP or other host type Bug 15840516—With the release of firmware 07.84.44.10, the host type ‘Solaris (with Veritas DMP or other)’ is no longer a valid host type. Workaround—If you are using Veritas with DMP, refer to Veritas support (http://www.symantec.com/support/contact_techsupp_static.jsp) for a recommended host type. What hosttype should we choose after the upgrade? Systems connected are running Veritas cluster with DMP. Please advise, RemcoSolveddifferences between Symantec ApplicationHA for Vmware and Symantec High Availability Solutions Guide for VMware
hi, Can anyone explain the main differences between Symantec ApplicationHA for Vmware and Symantec High Availability Solutions Guide for VMware? Kind of confuse about these two products. Thanks AllenSolved2.4KViews1like4Comments
AppHA package not installing on RHEL 6.4 guest, Upstart compatible?
We are currently evaluating AppHA. We are trying to install the AppHA package on RHEL 6.4, and have run into an interesting issue. Apparently the installer is looking for vmtools on the guest, but is looking for it in /etc/init.d/vmware-tools. Unfortunately, the Upstart architecture has moved everything to /etc/vmware-tools, and the actual script to access it is now /etc/vmware-tools/services ... I am installing from what I think is the correct package (dvd2/linux-x86_64-vmware/rhel6_x86_64/installer), and RHEL "6 and later" is listed as supported in the AppHA 6.0 SCL ... What am I missing here? Thanks C1.6KViews0likes3CommentsUnable to integrate guest components on the ApplicationHA console
Environment Two ESXi Servers = Esxi1 and Esxi2 version of Esxi Servers = 5.0 Vcenter OS = Windows2008R2(64bit) SAN = SAN attached on both Esxi Servers HA and DRS = enabled Application HA = 6.0a trial Application HA OS = rhel 6.4z (64bit) Hello, i can't deploy a rhel6 ApplicationHA agent directly from the vcenter ApplicationHA Console tab because the package isn't installed. When i wan't to integrate it i can't do it. I think I haven't the correct media to perform this task. On the vcenter OS, i tried to integrate agent guest components D:\Symantec HA\ApplicationHA\Console\installer>CopyInstaller.bat "D:\temp\SYMC_ApplicationHA_6.0a_Linux" Error: Invalid source location. D:\Symantec HA\ApplicationHA\Console\installer>CopyInstaller.bat "D:\temp\VRTS_HA_Agent_Pack_2Q2013_Linux" Error: Invalid source location. I think a dvd2 media/iso is requested but i haven't this one. How to fix it ?Solved1.5KViews0likes1Comment