Symantec Application HA 6.2 - ERROR V-16-1-52577 [Licensing] Unable to find a valid base VCS license key
Hi, I had just installed the Symantec Application HA using a trial license key but Im getting an error while trying to start the engine. Here is the engine log: 2015/07/13 23:16:19 VCS INFO V-16-1-51138 Number of processors configured on this system are 8 2015/07/13 23:16:19 VCS WARNING V-16-1-51140 In a multi-CPU system, configure an adequately high value for the ShutdownTimeout attribute. This ensures that when a system panics, its service groups successfully fail over to other systems. For more information, refer to the VCS Administrator's Guide 2015/07/13 23:16:19 VCS INFO V-16-1-10118 GAB timeout set to 30000 ms. GAB peak load timeout set to 30000 ms. 2015/07/13 23:16:19 VCS INFO V-16-1-10077 Received new cluster membership 2015/07/13 23:16:19 VCS NOTICE V-16-1-10112 System (rh7) - Membership: 0x1, DDNA: 0x0 2015/07/13 23:16:19 VCS NOTICE V-16-1-10086 System rh7 (Node '0') is in Regular Membership - Membership: 0x1 2015/07/13 23:16:19 VCS NOTICE V-16-1-10322 System rh7 (Node '0') changed state from CURRENT_DISCOVER_WAIT to LOCAL_BUILD 2015/07/13 23:16:20 VCS NOTICE V-16-1-10322 System rh7 (Node '0') changed state from LOCAL_BUILD to RUNNING 2015/07/13 23:16:20 VCS ERROR V-16-1-52577 [Licensing] Unable to find a valid base VCS license key (Local Build) 2015/07/14 13:23:27 VCS INFO V-16-1-10196 Cluster logger started 2015/07/14 13:23:27 VCS NOTICE V-16-1-11022 VCS engine (had) started 2015/07/14 13:23:27 VCS NOTICE V-16-1-11050 VCS engine version=6.2 2015/07/14 13:34:34 VCS INFO V-16-1-10196 Cluster logger started 2015/07/14 13:34:34 VCS NOTICE V-16-1-11022 VCS engine (had) started 2015/07/14 13:34:34 VCS NOTICE V-16-1-11050 VCS engine version=6.2 2015/07/14 13:34:34 VCS NOTICE V-16-1-11054 VCS engine join version=6.2.0.000 The error is this one: 2015/07/13 23:16:20 VCS ERROR V-16-1-52577 [Licensing] Unable to find a valid base VCS license key (Local Build) # ./hastatus attempting to connect.... VCS ERROR V-16-1-10600 Cannot connect to VCS engine attempting to connect....not available; will retry These are the licenses I have: [root@rh7 bin]# vxlicrep Symantec License Manager vxlicrep utility version 3.02.62.003 Copyright (C) 1996-2014 Symantec Corporation. All rights reserved. Creating a report on all VERITAS products installed on this system -----------------********* ********** ****------ ---------- - License Key = AJZU-PX6K-3K7U-R4MR-XXXX-X XXX-XXXX-X XXX-P Product Name = VERITAS Storage Foundation Basic Serial Number = 1436 License Type = PERMANENT OEM ID = 2006 Site License = YES Editions Product = YES Features := VxVM#VERITAS Volume Manager = Enabled CPU Count#VERITAS Volume Manager = Not Restricted VXFS#VERITAS File System = Enabled CPU Count#VERITAS File System = Not Restricted QLOG#VERITAS File System = Enabled PGR#VERITAS Volume Manager = Enabled VERITAS Storage Foundation Basic = Enabled Storage Expert#VERITAS Volume Manager = Enabled Platform = un-used Version = 6.2 Maximum number of volumes#VERITAS Volume Manager = 4 Volumes Maximum number of file systems#VERITAS File System = 4 File Systems -----------------********* ********** ****------ ---------- - Product Name = VERITAS Volume Manager License Type = PERMANENT Features := Dynamic Lun Expansion = Enabled Hardware assisted copy = Enabled Cross-platform Data Sharing = Enabled PGR = Enabled PGR_TRAINING = Enabled RAID5SNAP = Enabled -----------------********* ********** ****------ ---------- - Product Name = VERITAS File System License Type = PERMANENT Features := File Change Log = Enabled Cross-platform Data Sharing = Enabled Extra-Big File Systems = Enabled Multi-Volume Support = Enabled -----------------********* ********** ****------ ---------- - License Key = AJZU-WONB-DDH2-8OZE-XXXX-X XXX-XXXX-X XXX-P Product Name = VERITAS Volume Manager Serial Number = 1436 License Type = PERMANENT OEM ID = 2006 Site License = YES Point Product = YES Features := Storage Expert = Enabled VxVM = Enabled CPU Count = Not Restricted PGR = Enabled Platform = un-used Version = 6.2 Maximum number of volumes = 4 Volumes -----------------********* ********** ****------ ---------- - License Key = AJZU-BNZK-D37O-P4OL-XXXX-X XXX-XXXX-X XXX-6 Product Name = VERITAS File System Serial Number = 1436 License Type = PERMANENT OEM ID = 2006 Site License = YES Point Product = YES Features := VXFS = Enabled QLOG = Enabled CPU Count = Not Restricted Platform = un-used Version = 6.2 Maximum number of file systems = 4 File Systems ========================== ========== ========== ======= I have already tried to reinstall the license.. but no luck.. # cp -pR /etc/vx/licenses/lic /etc/vx/licenses/lic_bkp # cd /etc/vx/licenses/lic # rm *.vxlic # /opt/VRTS/bin/vxlicinst ( Install the license key ) ======= Any suggestion? The OS is RHEL7.1 Tks, Joao2.6KViews0likes1Comment
Unable to configure appha on vmguest after installation. Admin page over port 5634 not accessible
Hi, I am evaluating application HA and got stuck with The installation was successful xprtld is running Port 5634 is open and I can connect from Vcenter server over http://vmguest:5634 However I am not able to see appha details from Vcenter Server vm guest tab It says: Unable to retrieve status of vmware guest machine. On checking 14152 and 14153 ports are not listening on VM guest. What is the service I need to confgure or start to get this port on listen mode in the vmguest? Could somebody please help Thanks in advance HariSolved2.3KViews2likes9Comments