Supportability of VCS Oracle Golden Gate agent in A/A mode.
Hi VCS product team, IHAC, planning to configure VCS with Oracle Golden Gate agent in A/A mode Where DB RW mode in primary and DR site. As per VCS agent guide for Oracle Golden Agent it is supported in A/Standby mode. Question from customer is if there is any white paper to configure in A/A. Here is detailed configuration. As you can see below, 2 VCS clusters will be used and each cluster will work independently. OGG will take care of DB replication between Oracles and the updates is bidirectional. The DR solution is Active/Active. Both Oracle DBs will be open and allowed R/W. So all service will be available on both sites. According to your answer below, VCS and VxFS support OGG and that is good news. If one node in one site, there will be local failover. Are there any settings to support OGG service such as bringing up when local failover happens? I will appreciate if you share any related document which explain below configuration. Diagram attached to this discussion.1.3KViews1like1CommentNetbackup could not initiate a trust relationship with host
Hello, I have a problem whe i try to log on into the admin GUI, Iused torun the command/usr/openv/netbackup/bin/jnbSA $ from themasterserver exporting the display using Xming and the java application started witout problem, however todaywhen I try to login, I can't do it. The applicationsshows this message:"NetBackup could not initiate a trust relationship with hosthostname. Ensure that your Domain Name Service (DNS) resolves the hostname to the correct IP address and check network connectivity". When i see the log of the applications it shows the following messages: DISPLAY environment variable is set to: localhost:11.0 Console was started on: Linux srvbackup 3.10.0-123.el7.x86_64 #1 SMP Mon May 5 11:16:57 EDT 2014 x86_64 x86_64 x86_64 GNU/Linux Command line options were: /usr/openv/netbackup/bin/jnbSA $ Starting administration console version 7.6.1. LANG=en_US.UTF-8 LC_CTYPE="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_PAPER="en_US.UTF-8" LC_NAME="en_US.UTF-8" LC_ADDRESS="en_US.UTF-8" LC_TELEPHONE="en_US.UTF-8" LC_MEASUREMENT="en_US.UTF-8" LC_IDENTIFICATION="en_US.UTF-8" LC_ALL= java version "1.7.0_55" Java(TM) SE Runtime Environment (build 1.7.0_55-b13) Java HotSpot(TM) 64-Bit Server VM (build 24.55-b03, mixed mode) ServerInterface:setDebugLevel:262144 BpjavaLoginModule:Setting ServerRequest, debugLevel:262144 BpjavaLoginModule:connectServer:[root][srvbackup][0] From Logon, Connecting to vnetd service over PBX port = 1556, authService is true Acknowledgement from PBX1 Mutual Auth : true vrts.vss.sdk.at.exception.VRTSAtException: at vrts.vss.sdk.at.lib.core.Authenticator.atSecConnConnectEx(Native Method) at vrts.vss.sdk.at.lib.core.Authenticator.vrtsAtSecConnConnectEx(Authenticator.java:2733) at vrts.vss.sdk.at.lib.core.Authenticator.vrtsAtSecConnConnectEx(Authenticator.java:2708) at vrts.shared.server.VxATSocket.sslConnect(VxATSocket.java:337) at vrts.shared.server.ServerInterface.secureConnect(ServerInterface.java:1141) at vrts.shared.server.ServerInterface.connectToServiceViaVNETD(ServerInterface.java:1236) at vrts.shared.server.ServerInterface.run(ServerInterface.java:2289) Acknowledgement from PBX1 Mutual Auth : false Connecting to NBATD at [ srvbackup!1556!nbatd ] for establishing trust. vrts.shared.server.CertificateAuthenticationException: NetBackup could not initiate a trust relationship with host "srvbackup". Ensure that your Domain Name Service (DNS) resolves the hostname to the correct IP address and check network connectivity. at vrts.shared.server.VxATSocket.setupTrust(VxATSocket.java:259) at vrts.shared.server.VxATSocket.sslConnect(VxATSocket.java:382) at vrts.shared.server.ServerInterface.secureConnect(ServerInterface.java:1141) at vrts.shared.server.ServerInterface.connectToServiceViaVNETD(ServerInterface.java:1233) at vrts.shared.server.ServerInterface.executeRun(ServerInterface.java:3250) at vrts.shared.server.ServerInterface.run(ServerInterface.java:2289) -------- secureConnect() -------- vrts.shared.server.CertificateAuthenticationException: NetBackup could not initiate a trust relationship with host "srvbackup". Ensure that your Domain Name Service (DNS) resolves the hostname to the correct IP address and check network connectivity. at vrts.shared.server.VxATSocket.setupTrust(VxATSocket.java:259) at vrts.shared.server.VxATSocket.sslConnect(VxATSocket.java:382) at vrts.shared.server.ServerInterface.secureConnect(ServerInterface.java:1141) at vrts.shared.server.ServerInterface.connectToServiceViaVNETD(ServerInterface.java:1233) at vrts.shared.server.ServerInterface.executeRun(ServerInterface.java:3250) at vrts.shared.server.ServerInterface.run(ServerInterface.java:2289) CertificateAuthenticationException encountered, NetBackup could not initiate a trust relationship with host "srvbackup". Ensure that your Domain Name Service (DNS) resolves the hostname to the correct IP address and check network connectivity. at vrts.shared.server.ServerInterface.executeRun(ServerInterface.java:3250) i{ve checked the services and the port 1556 is opend under the service/opt/VRTSpbx/bin/pbx_exchange as you can see: [root@srvbackup bin]# netstat -tulpn | grep 1556 tcp 0 0 0.0.0.0:1556 0.0.0.0:* LISTEN 2639/pbx_exchange tcp6 0 0 :::1556 :::* LISTEN 2639/pbx_exchange this is the bpps -x output: [root@srvbackup bin]# /usr/openv/netbackup/bin/bpps -x NB Processes ------------ root 10505 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/vnetd -standalone root 10508 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/bpcd -standalone root 10528 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbdisco root 10634 1 2 10:03 ? 00:00:29 /usr/openv/db//bin/NB_dbsrv @/usr/openv/var/global/server.conf @/usr/openv/var/global/databases.conf -hn 5 root 10715 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbevtmgr root 10760 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbaudit root 10897 1 0 10:03 ? 00:00:00 /usr/openv/pdde/pdag/bin/mtstrmd root 10902 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbemm root 10926 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbrb root 10980 1 0 10:03 pts/2 00:00:00 /usr/openv/netbackup/bin/bprd root 10997 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/bpcompatd root 11000 1 0 10:03 pts/2 00:00:00 /usr/openv/netbackup/bin/bpdbm root 11008 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbjm root 11015 11000 0 10:03 pts/2 00:00:00 /usr/openv/netbackup/bin/bpjobd root 11047 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbpem root 11106 11047 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbpem root 11115 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbstserv root 11173 1 0 10:03 ? 00:00:00 /usr/openv/netbackup/bin/nbrmms root 11308 1 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbsl root 11344 1 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbim root 11452 1 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbars root 11594 1 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbvault root 11598 1 0 10:04 pts/2 00:00:00 /usr/openv/netbackup/bin/nbcssc -a NetBackup root 11636 1 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbsvcmon root 11697 11000 0 10:04 pts/2 00:00:00 /usr/openv/netbackup/bin/bpdbm root 11712 11008 0 10:04 ? 00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbjm root 12337 12296 0 10:07 pts/2 00:00:04 /usr/openv/java/jre/bin/java -Dvrts.NBJAVA_CONF=/usr/openv/java/nbj.conf -showversion -d64 -Dvrts.common.server.LCCTYPE="en_US.UTF-8" -Dvrts.common.server.LOG_CMDLINES=false -Djava.library.path=/usr/openv/lib -Dvrtsat.datadir=/usr/openv/var/vxss/at -Dvrtsat.home=/usr/openv/netbackup/sec/at -Dvrts.common.utilities.DEBUG_PROPERTIES=/usr/openv/java/Debug.properties -Dvrts.nbe.HOSTNAME= -Dvrts.nbe.INST_REL=760000 -Dvrts.nbe.BUILDNO=20141027 -Djava.util.prefs.PreferencesFactory=vrts.common.launch.PropertiesPreferencesFactory -Xms1024M -Xmx2048M vrts.nbe.AdminConsole MM Processes ------------ root 10966 1 0 10:03 pts/2 00:00:00 /usr/openv/volmgr/bin/ltid root 10972 1 0 10:03 pts/2 00:00:00 vmd root 11733 10966 0 10:04 pts/2 00:00:00 tldd root 11749 10966 0 10:04 pts/2 00:00:00 avrd root 11752 1 0 10:04 pts/2 00:00:00 tldcd Shared Symantec Processes ------------------------- root 2639 1 0 2015 ? 00:05:42 /opt/VRTSpbx/bin/pbx_exchange and the /etc/hosts has already an entry for the hostname. Thanks a lot for your help!!Solved11KViews1like1CommentEncoding warnings on Monitor Server
Hi all, After upgrading to 12.5 from 11.1.2 getting these encoding warnings in monitor server FileReader logs. Also missing the email body from the incident. Looking like it cant decode the body but its just plain text emails and it was fine with 11.1.2 as exactly the same setup. Nov 6, 2014 10:42:58 AM com.vontu.protocols.L7EncodingUtils extractEncodingFromContentType WARNING: Unknown encoding found: sjis, using default: UNKNOWN (unknown,---) Nov 6, 2014 10:43:18 AM com.vontu.protocols.MIMEMessageDecomposer getDecodedContent WARNING: Error decoding base64 bodypart possibly due to dropped or discarded packets. Nov 6, 2014 10:43:23 AM com.vontu.protocols.L7EncodingUtils extractEncodingFromContentType WARNING: Unknown encoding found: iso-5589-1, using default: UNKNOWN (unknown,---) Nov 6, 2014 10:43:28 AM com.vontu.protocols.L7EncodingUtils extractEncodingFromContentType WARNING: Unknown encoding found: iso-5589-1, using default: UNKNOWN (unknown,---) Nov 6, 2014 10:43:33 AM com.vontu.protocols.L7EncodingUtils extractEncodingFromContentType WARNING: Unknown encoding found: iso-5589-1, using default: UNKNOWN (unknown,---) Plus on the enforce vontuManger.log file getting these INFO | jvm 1 | 2014/11/05 11:00:00 | OutOfProcessIndexer JVM is shutting down with exit code value: 0 INFO | jvm 1 | 2014/11/05 13:07:11 | line 1:71: unexpected token: null INFO | jvm 1 | 2014/11/05 13:11:30 | line 1:71: unexpected token: null INFO | jvm 1 | 2014/11/05 17:04:00 | line 1:71: unexpected token: null INFO | jvm 1 | 2014/11/06 05:03:03 | INDEXER> OutOfProcessIndexer is exiting with exit code value: 0 INFO | jvm 1 | 2014/11/06 05:03:03 | INDEXER> OutOfProcessIndexer JVM is shutting down with exit code value: 0 Anyone faced these messages before or know why they occur? thanks710Views0likes0Comments